Netgear Cg30002 Status Manual

Content Filtering21
 NETGEAR Wireless Cable Gateway CG3000
Services
You can use the Services screen to disable certain gateway features.
1. 
Select  Content Filtering > Services . 
2. To disable a feature, clear its check box.
3.  Click  Apply for your changes to take effect.
The following Services are available in this screen:
•     Firewall Features . The gateway performs Stateful Packet Inspection (SPI) and protect 
against Denial of Service (DoS) attacks. 
•     IPSec Pass-Through . IPSec traffic is...

22
4
4.   Manage Your Network 
This chapter describes how to perform network management tasks with your gateway. When 
you log in to the gateway (see Log In to Your Gateway on page
  9), these tasks are grouped 
under Maintenance. 
This chapter includes:
•     Gateway Status on page 23.
•     MTA Status on page 24
•     Signal Status on page 25
•     Change Password on page 26.
•     Back Up and Restore Your Settings on page 26.
•     Event Log on page 27.
•     Diagnostic Ping Utility on page 27. 

Manage Your Network
23  NETGEAR Wireless Cable Gateway CG3000
Gateway Status
Use the Gateway Status screen to see hardware and firmware details about the gateway and 
basic status information. Select Maintenance > Gateway Status.
The following table describes the fields displayed in this screen.
Information:
Modem Status FieldDescription
Standard Specification 
CompliantDOCSIS 3.0
Hardware Version The hardware version of the gateway.
Software Version The version of firmware currently running on the...

Manage Your Network
24 NETGEAR Wireless Cable Gateway CG3000 
Network Configuration:
Status:
MTA Status
The Multimedia Terminal Adaptor (MTA) Status shows the status of the voice ports on the 
gateway. This page refreshes every ten seconds to update the status.
MTA Provision Status. Shows which of your telephone lines are active and registered with 
your service provider. 
MTA MAC Address. The MAC address of the MTA interface. 
MTA IP Address. The IP MTA address. 
MTA Telephony Signaling. The type of...

Manage Your Network
25  NETGEAR Wireless Cable Gateway CG3000
Signal Status
Signal Status lets you follow the startup procedure and get details on the Downstream and 
Upstream cable channel.
Figure 1. Startup, downstream, and upstream information
Use the Signal Status screen to track the gateway’s initialization procedure, and to get details 
about the downstream and upstream cable channel. The time is displayed after the gateway 
is initialized.
The gateway automatically goes through the following steps...

Manage Your Network26
NETGEAR Wireless Cable Gateway CG3000 
Change Password
For security, the gateway has its own user names and passwords. NETGEAR \
recommends 
that you change the default passwords to more secure passwords. The idea\
l passwords 
should contain no dictionary words from any language, and should be a mi\
xture of both upper 
and lower case letters, numbers, and symbols. Your passwords can be up t\
o 30 characters.
1. 
Select 
Maintenance > Set Password . 
2.  To change the password,...

Manage Your Network27
 NETGEAR Wireless Cable Gateway CG3000
Event Log
The gateway logs security-related events such as denied incoming service\
 requests and 
hacker probes. 
1. 
Select  Maintenance > Event Log .
2. To clear the log, click  Clear Log, and to refresh the log, click Refresh . 
Diagnostic Ping Utility
From the Diagnostics screen you can use Ping. 
1. Select  Maintenance > Diagnostics. 

Manage Your Network28
NETGEAR Wireless Cable Gateway CG3000 
2. 
To start a ping test, enter the IP address in the Diagnostics screen, an\
d click the  Ping 
button. The Ping Results are displayed:
3.  To return to the Diagnostics screen and stop the test, click Back  and then click Abort Test. 

29
5
5.   Advanced Settings
This chapter describes how to customize your network through the advanced settings on your 
gateway. When you log in to the gateway (see Log In to Your Gateway on page
  9), these tasks 
are grouped under Advanced.
This chapter includes:
•     Wireless Settings on page 30
•     Firewall Rules: Port Blocking on page 32.
•     Firewall Rules: Port Forwarding on page 33.
•     WAN Setup on page 34
•     Dynamic DNS on page 35
•     LAN IP Setup on page 36.
•     Remote Management...

Advanced Settings
30 NETGEAR Wireless Cable Gateway CG3000 
Wireless Settings
Select Advanced > Wireless Settings to display the following screen where you can 
configure the wireless radio settings, and other advanced settings:
The following table describes the fields in the Advanced Wireless Settings screen.
Advanced Wireless SettingsDescription
Wireless Access 
PointEnable Wireless Access Point By default this checkbox is selected so that the 
gateway works as a wireless access point. You can 
turn...