NEC Vt800 Projector User Manual

							
59
4. Convenient Features
2.  Press the SELECT  or  button to select [NETWORK] and press the ENTER button.
  t
he [
net
WO
r
K] menu will be displayed.
 
3.   From the [NETWORK] menu, use the wireless keyboard to select [REMOTE DESKTOP CONNECTION].
  t he [ r emote  d esktop Connection] window appears.
 
 TIP:
 
Setting [OPTIONS] in REMOTE DESKTOP
 
Clicking [OPTIONS] displays the [PERFORMANCE] screen.
 
Making  settings  to  [OPTIONS]  will  allow  you  to  display  the  desktop  background,  or  to  enable  the  window  animation  function 
during the Remote Desktop operation. However, doing this will cause the display’s or mouse’s response to slow down. 
 
If the display’s or mouse’s response is slowed down, try one or more of the following:
DESKTOP BACKGROUND: Clear the check mark to display the desktop backgrou\
nd in monochrome.
MENU AND WINDOW ANIMATION: Clear the check mark to disable menu and wind\
ow animation.
THEMES: Clear the check mark not to use Themes.
SHOW  CONTENTS  OF  WINDOW  WHILE  DRAGGING:  Clear  the  check  mark  to  show  only  the  window  pane 
while dragging.
4.
 
Operate the wireless keyboard to input the IP address of Windows Vista and click [CONNECT].
  t he log-on screen of Windows Vista is displayed in the screen projected by the projector.
5.
 
Operate the wireless keyboard to input the user’s password and press [Enter].
  t he remote desktop function is started.
 
Windows Vista desktop is displayed in the screen projected by the projector.
  l og out the computer.
 
Use the wireless keyboard connected to the projector to operate Windows Vista.
NOTE:  When  the  projection  is  made  with  the  remote  desktop  function,  the  background  color  of  the  desktop  is  changed  to 
black. 
						

							
0
4. Convenient Features
Ex

t

ng the Remote Desktop
1.   Operate the keyboard to click [Start] from the desktop screen projected by the projector.
 
2.  Click [X] on the right of the start menu.
  t he remote desktop function is stopped.
3.
  Press the SOURCE button of the projector to select an input terminal other than [NETWOR
K].
 
When using the remote control, press a button other than the 
net
WO
r
K button. 
						

							
1
5. Using the Viewer
 Making the Most out of the Viewer Function
Features
The  Viewer  feature  allows  you  to  view  slides  stored  on  a  USB  memory  on  the  projector.  Even  if  no  computer  is 
available, presentations can be conducted simply with the projector. This feature is convenient for holding presenta-
tions at meetings and in offices, as well as for playing images taken \
on digital cameras.
Easy to use
•  Presentations can be made by inserting a USB memory (not supplied)
•   Easy slide switching
•
  Remote control operation
•
  Jumping to a list of slides or any specific slide
Simple utility software (for computer)
•  Ulead Photo Explorer 8.0SE Basic operable.
•   Control screen for displaying lists of slides and editing.
TIP:
•  To use the Viewer, first you need to create presentation materials on your PC (JPEG, B\
MP, GIF*1, PNG*1, Index*2).
 
For creating presentation materials using the Ulead Photo Explorer 8.0, \
see the On-line help in Ulead Photo Explorer 8.0.
*1Both PNG and GIF format support non-interlaced images only.
*2“Index” file is a file created using the Ulead Photo Explorer \
8.0 contained on the optional NEC User Supportware 5 CD-ROM. 
NOTE: 
•   Use commercially available USB memory devices. 
•
  We do not warrant that the USB port of the projector will support all USB\
 memory devices in the market.
•
  The projector does not support NTFS formatted USB memory device.
 
Be sure to use a USB memory device formatted with the FAT32, FAT16 or FAT file system.
 
To format your USB memory device in your computer, refer to the document or help file that comes with your Windows.
 Saving data to a USB memory device
There are two ways to save your data to a USB memory device.
Using Ulead Photo Explorer 8.0 (optional)
Install  Ulead  Photo  Explorer  8.0  from  the  User  Supportware  5  to  your  computer.  Use  Ulead  Photo  Explorer  8.0  to 
create graphic data on your computer and save the files to a USB memor\
y device.
Using Windows Explorer to save files
Supported file format for Viewer are JPEG, BMP, PNG, GIF and Index. 
						

							

5. Using the Viewer
 Operating the Viewer Function from the Projector (playback)
This  section  describes  the  operation  for  showing  slides  created  using  the  Viewer  function  with  the  projector.  It  is 
also possible to make slides directly from the images projected with the\
 projector.
Projecting slides (Viewer)
Preparation:  Store  JPEG  or  BMP  files  (JPEG,  BMP,  non-interlaced  GIF  or  non-interlaced  PNG  files)  in  a  USB 
memory inserted into your PC.
To start the Viewer, press the SOURCE button on the cabinet to select [V\
IEWER]. (→ page 22)
Viewer screen will be displayed. (A slide will be displayed at the fact\
ory default.)
•  You can use the VIEWER button on the remote control to select [VIEWER].
Operating Viewer Menu
1.  Insert a USB memory into the USB port of the projector.
  The USB indicator lights.
2.
  Press the VIEWER button on the remote control or select the [ V
IEWER
] from the source list.
 
An image stored in the USB memory will be displayed.
NOTE: When [SHOW THUMBNAILS] is turned on in the OPTIONS menu, the thumb\
nail screen will be displayed. (→ page 64)
NOTE: Pressing the EXIT button during slide playback will display the th\
umbnail screen.
Sl

de and Thumbna  l
When VIEWER is selected, one of the two screens is displayed.
One is a slide and the other is a thumbnail screen.
  [SLIDE]   [T h U mb NAILS]
  
TIP: To switch from [SLIDE] to [THUMBNAILS], press the EXIT button. 
The Control  b ar
Pressing  the  MENU  button  during  slide  playback  will  display  the  control  bar  which  allows  you  to  operate  a  slide-
show. Press the EXIT button to close the control bar.
The control bar contains the following icon buttons: 
returns to the pre-vious image.
Plays back slides.
s
tops  a uto Play while you 
are playing back slides.
a dvances to the next image.
r otates the image 90 degrees clockwise. rotates the image 90 degrees 
counterclockwise.
s
elects the currently 
displayed image for your background logo.Quits slide playback and then returns to the thumb-nail screen. 
						

							

5. Using the Viewer
Highlight  ...................................Indicates the selected folder or drive.
List of folders   ............................Indicates folders contained on a USB memory.
Information  ...............................Indicates information of the selected file or folder.
Folder: folder name, number of files, creation date (month/day/year), creation time (hour:minute:
second).
File:  file  name,  slide  number/number  of  displayable  slides  in  a  folder,  creation  date  (month/day/
year), creation time (hour:minute:second), file size.
Number of files   .........................Indicates  number  of  displayable  slides  in  the  selected  folder.  The  maximum  number  of  images 
recognized as slides within one directory is about 250.
Thumbnail/file name   .................Indicates thumbnails and names contained in a folder.
Cursor  .......................................Indicates the selected slide.
Scroll bar   ..................................Used to view folders or files not visible in the window.
highlight list of folders
i
nformation
n umber of files t humbnail/file names croll bar
Cursor (yellow)
Thumbna
 l screen 
						

							
4
5. Using the Viewer
Setting Option for Viewer
P LAY  M ODE :
M ANUAL   ................
Views a slide manually when the Viewer source is selected.
A
UTO
 
.....................
Plays back slides automatically when the Viewer source is selected.
I
NTERVAL
:
Specifies interval time between 5 and 300 seconds.
S
TART :
Specifies start screen when the Viewer source is selected.
S
HOW  T HUMBNAILS :
Selecting the Viewer source will display a list of thumbnails of graphic files stored in the USB memory when [ O N] 
is  selected.  Selecting  the  Viewer  source  will  display  a  list  of  icons  of  graphic  files  stored  in  the  USB  memory 
when [OFF] is selected.
S
ORT :
Rearranges the slides or thumbnails by name, extension, date or size.
NOTE: This setting is not available for the following folders:*   Folders created with the “Output Viewer” feature of Ulead Photo Ex\
plorer 8.0 or with Viewer PPT Converter 3.0
OK/C
ANCEL :
To close the Options menu with saving changes, select [OK] and press the\
 ENTER button.
To close the Options menu without saving changes, select [ C ANCEL] and press the ENTER button.
THUMBNAILS menu
The  THUMBNAILS  menu  will  appear  when  you  press  the  MENU  button  on  the  remote  control  or  the  projector 
cabinet. To close the THUMBNAILS menu, press the EXIT button.
The THUMBNAILS menu includes the following commands:
P LA y   ..................
Plays back automatically or manually depending on the setting in Options. This allows you to move on to 
the next slide when [ M ANUAL] is selected in the [P LA y M ODE].
L
OGO
 
.................
Replace  the  default  background  logo  with  another  logo  in  JPEG,  BMP,  non-interlaced  GIF  or  non-inter-
laced PNG format.
O
PTIONS
 
............
Displays the Viewer setting options. 
						

							
5
Exiting Viewer
To  exit  Viewer,  switch  to  another  input  such  as  C OMPUTER   1,  C OMPUTER   2,  HDMI,  V IDEO ,  S-V IDEO  or  NET-
WORK.
*   To switch to another input, there are two ways:
•
  Press the COMPUTER 1, COMPUTER 2, HDMI, VIDEO, S-VIDEO or NETWORK button on the remote con
-
trol.
•
 
Press  the  MENU  button  on  the  remote  control  to  display  the  Viewer  menu.  Press  the  MENU  button  again  to 
display the main menu and select the input from the [ S OURCE] submenu.
With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected.
Example: When conducting presentations using a combination of slides and moving pictures from a VCR, etc., it is 
possible to switch from a Viewer slide to the video picture then back to the Viewer slide simply by using the  V IEWER 
button.
NOTE: Even if you switch the current Viewer source to another source, the current slide is retained. When you return back to the 
Viewer, you will get the slide that has been retained.
5. Using the Viewer 
						

							

5. Using the Viewer
 Changing Background Logo
You can change the default background logo using the Viewer feature.
NOTE: File size must be 256KB or less. Maximum file resolution is 1024 x 768. File formats other than JPEG, BMP, non-interlaced 
GIF or non-interlaced PNG are not available.
Preparation: Store JPEG or BMP files (JPEG, BMP, non-interlaced GIF or non-interlaced PNG files) in a USB mem-
ory into the projector’s USB port.
NOTE: To change highlight from the Thumbnails screen (right window) to a directory tree (left window) , press the EXIT button. 
To return highlight to the Thumbnails screen, press the ENTER button.
1.  Use  the  SELECT 
  button  to  select  a  file  (slide)  for  your  background  logo  when  displaying  the 
Thumbnail screen.
2.
 
Press the MENU button to display the THUMBNAILS menu.
3.
 
Use the SELECT 
 button to select [ L OGO] and then press the ENTER button.
  a
 confirmation dialog box will be displayed.
4. Use the SELECT  button to select [yES] and press the ENTER button. This completes changing a logo 
for the background.
*
  Once  you  have  changed  the  background  from  the  NEC  logo  to  another,  you  cannot  return  the  logo  to  back
-
ground even by using [ R ESET]. To put the NEC logo back in the background logo, repeat the above steps. The 
NEC logo file is included on PC Control Utility 3.0 which is downloada\
ble from our web site:
 
http://www.nec-pj.com 
						

							
7
 Using the Menus
1.   Press the MENU button on the remote control or the projector cabinet to display the menu.
 
NOTE: The commands such as , ENTER, EXIT in the bottom show available buttons for your operation.
2.
 
Press the SELECT 
 buttons on the remote control or the projector cabinet to display the submenu.
3.
 
Press  the  ENTER  button  on  the  remote  control  or  the  projector  cabinet  to  highlight  the  top  item  or  the 
first tab.
4.
 
Use  the  SELECT 
  buttons  on  the  remote  control  or  the  projector  cabinet  to  select  the  item  you  want 
to adjust or set.
  y ou can use the SELECT 
 buttons on the remote control or the projector cabinet to select the tab you 
want.
5.
 
Press the ENTER button on the remote control or the projector cabinet to display the submenu window.
6.
 
Adjust  the  level  or  turn  the  selected  item  on  or  off  by  using  the  SELECT 
  buttons  on  the  remote 
control or the projector cabinet.
Changes are stored until you adjust it again.
7.
 
Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the pro
-
jector cabinet to quit the menu display.
NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.
8.    Press the MENU button to close the menu.
 
To return to the previous menu, press the EXIT button.
6. Using On-Screen Menu 
						

							
8
6. Using On-Screen Menu
Using ADVANCED menu and BASIC menu
The projector has two menu modes: the ADVANCED menu and the BASIC menu.
ADVANCED menu   ..This is the menu that contains all the available menus and commands. Users with an ADMINISTRAOR or 
ADVANCED account can access the ADVANCED menu.
BASIC menu  ..........This  is  the  basic  menu  that  contains  minimum  essentials  of  menus  and  commands.  Users  with  a  BASIC 
account can access the BASIC menu.
See page 47 for settings available to ADVANCED and BASIC menus.
NOTE: 
•   A user with an ADMINISTRATOR account that has no password set is registered at the factory.
  This will allow the user to access the ACCOUNT items without password en\
try.
•
  When using your USB mouse, click each number or alphabet.
  BS: Delete the character before the cursor or highlight.
  OK/[
]: Confirm the keyword and close the Software keyboard.
Entering alphanumeric characters by using Software Keyboard
[IP ADDRESS, PASSWORD]   [USER NAME, PROJECTOR NAME]   [PASSWORD OR KE y WORD]
  
1 to 0 and Characters
 
..............................
Use to type in password or keyword.
MODE   ....................Selects one of three modes for num-
bers,  alphabet  and  special  charac-
ters.
SP  ..........................Inserts a space
BS  ..........................Deletes one character backward
>   .........................Advances to the next
OK  ..........................Executes the selection
C
ANCEL
 
.................
Cancels the selection
When us  ng the remote control:
1.  Press  the  MENU,  AUTO  ADJ,  SELECT ,  SE-
LECT , SELECT  or SELECT  button to se-
lect a character in the row.
  e xample:  t o  enter  “C”,  press  the  sele C t  
  but-
ton.
2.
 
Press  the  MENU,  AUTO  ADJ,  SELECT 
,  SE-
LECT , SELECT  or SELECT  button to se-
lect a character in the column.
  e xample:  t o enter “C”, press the M en U button.
EXIT  .......................Deletes a character.
ENTER   ...................Makes  your  input  take  ef fect  and 
closes the input screen.
When us  ng the mouse:
Point to a character and click it.
[BS]  .......................Deletes a character.
[]  ........................Makes  your  input  take  ef fect  and 
closes the input screen.