NEC Vt800 Projector User Manual

							
9
4. Convenient Features
9 Displaying Two Pictures at the Same Time
The projector has a feature that allows you to view two different signals simultaneously. You have two modes: PIP 
mode and Side by Side mode.
From the menu you can select [SETUP] → [BASIC] →  [PIP/SIDE B y  SIDE]. 
The [PIP/SIDE BY SIDE] menu item has the following three options: MODE, \
POSITION, and SOURCE.
Use the SELECT  or  button to select [MODE], [POSITION] or [SOURCE] and press the ENTER but\
ton.
Selecting the PIP or SIDE BY SIDE Mode [MODE]
This option allows you to select two modes: PIP and Side by Side.
Use the SELECT  or  button to select [PIP] or [SIDE BY SIDE] and press the ENTER button.
PIP: This option allows you to view a sub picture in the main picture.
 
 
SIDE BY SIDE: This allows you to view two pictures side by side.
 
 
NOTE: The main picture will be displayed on the left side and the sub pi\
cture on the right side.
Main picture
s ub
picture
Main pictures ub picture 
						

							
40
4. Convenient Features
V ew  ng Two  p ctures
1.  Press the PIP button on the remote control.
  t he P i P/ side  BY  side  s
OU r C e
 screen will be displayed.
 
2.  Use the SELECT  or  button to select the source and press the ENTER button.
  t
he P
i
P screen or 
side
 BY  side  screen will be displayed, depending on which was selected in the [MO de ] set
-
ting screen.
 
3. Press the PIP button again to return to the normal screen (single picture).
TIP: 
•  Selecting another source will return to the normal screen.
•
  Selecting a source not supported for the main picture or the sub picture will return to \
the normal screen.
POSITION 
This option allows you to select the position of a sub picture in the ma\
in picture.
NOTE: 
• 
The default setting is [BOTTOM-RIGHT]. 
Use the SELECT  or  button to select the sub picture’s position and press the ENTER butto\
n.
The options are:  TOP - LEFT ,  TOP - RIGHT ,  BOTTOM - LEFT , and BOTTOM - RIGHT.
The following adjustments and settings are available for the main pictur\
e only.
-   Adjusting picture and sound
-
  Setting an aspect ratio for the screen. (
→ page 80)
The following operations are available for both the main and sub picture\
s.-   Picture and audio mute
-
  Freezing a moving picture 
						

							
41
4. Convenient Features
 Preventing Unauthorized Use of the Projector
Assigning a keyword prevents the projector from being used by unauthoriz\
ed individuals.
Turning on the Security function by assigning a keyword for the first time
1.  Press the MENU button.
  The menu will be displayed.
 
2.
  Press the SELECT 
 button to highlight the [ S ETUP] submenu and press the ENTER button.
 
The page tab [ B
ASIC
] will be highlighted.
 
3.   Press the SELECT  button three times to highlight the page tab [INSTALLATION (2)]. 
						

							
4
4. Convenient Features
4.   Press the SELECT  button three times to highlight [ S ECURIT y SETTINGS].
 
5.
  Press the ENTER button to display the SECURIT y  SETTINGS menu.
 
6. Press the SELECT   button four times to highlight [SECURIT y  SETTINGS] and press the ENTER button.
 The Security screen will be displayed.
 
 7.  Press the SELECT  button once to highlight the Keyword entry box and press the ENTER button.
 
The Software keyboard will be displayed. 
						

							
4
4. Convenient Features
8.   Enter an alphanumeric keyword using the Software keyboard.
  For example, to enter “1234”, follow the steps 8-1 to 8-4 below.
 
NOTE: 
•  When using your USB mouse, click each number or alphabet.
 
BS: Delete the character before the cursor or highlight. 
: Confirm the keyword and close the Software keyboard.
• The keyword must be 1 to 10 characters long.
• Please make a note of your keyword.
e nter a keyword by using the remote control.
8-1.
  Press the M en U button and the  a U t O  ad J. button to enter “1”.
  t he asterisk “
” will be displayed in the keyword entry box.
8-2.
 
Press the M
en
U button and the  sele C t  
 button to enter “2”.
  t
he asterisk “
” will be displayed in the keyword entry box.
8-3.
 
Press the M
en
U button and the  sele C t  
 button to enter “3”.
  t
he asterisk “
” will be displayed in the keyword entry box.
8-4.
 
Press the M
en
U button and the  sele C t  
 button to enter “4”.
  t
he asterisk “
” will be displayed in the keyword entry box.
8-5.
 
Press the 
enter
 button.
9.
 
Press the SELECT 
 button once to highlight [OFF] and press the SELECT  button to highlight [ON].
  
						

							
44
4. Convenient Features
10. Press the SELECT  button to highlight [OK] and press the ENTER button.
 
The confirmation screen will be displayed.
 
11.   Press the SELECT  or   button to highlight [ y ES] and press the ENTER button.
 
The Security Function will take effect when the projector is turned on next time.
Checking If Security is enabled
Turn off the projector and turn it back on to check if the Security func\
tion is enabled.
1.
  Press the POWER button.
  t he [POW er  O ff  /  are  YOU  s U re ?] message will appear. 
  Press the  enter  button or the POW er  or the POW er  O ff  button again.
  t he  lamp  lights  off  and  the  POW er   indicator  flashes  orange.  Please  wait  until  the  POW er   indicator  changes 
from flashing to steady light.
2.
 
When the POWER indicator lights steady orange, push the Main POWER switch to the off position (O).
  t he projector will turn off.
3.
 
Push the Main POWER switch to the on position (I).
  t he POW er  indicator lights orange.  t he projector is in standby condition.
4.
 
Press and hold the POWER button for a minimum of two seconds.
  t he  projector  will  turn  on.  t he  [Pr
OJ e C t O r  is  l OCK ed!  e nter  YOU r  K e YWO rd
.]  message  will  be  dis-
played at the bottom of the screen.
5.
 
Press the MENU button.
  t he Keyword entry screen will be displayed
 
6.   Press the ENTER button.
  t he  s oftware keyboard will be displayed.
7.  Use  the  same  procedures  as  steps  1  to  8  described  in  the “Assigning  a  Keyword  for  the  first  time”  sec-
tion to enter “1234”.
  e ach  time  one  number  is  entered,  an “
”  (asterisk)  will  appear.  Keyword  appears  as  asterisks  so  the  real  key-
word is hidden.
8. After entering your keyword, highlight [OK] and press the ENTER button.
  t he  s oftware keyboard will disappear.  t his will allow you to operate the projector. 
						

							
45
Disabling the Security
1.  Press the MENU button.
  t he menu will be displayed.
NOTE: Immediately after the projector has been turned on and the “Projector is locked! Enter your keyword.” message is dis-
played at the bottom of the screen, pressing the MENU button will display the Keyword entry will be displayed. At this time, 
pressing the MENU button will display the menu.
2.
 
Press the SELECT 
 button to highlight [ S ETUP] and press the ENTER button.
  t
he page tab [ Basi
C
] will be highlighted.
3.
 
Press the SELECT 
 button twice to highlight the page tab [INSTALLATION (2)].
4.
 
Press  the  SELECT 
  button  three  times  to  highlight  [ S ECURIT y  SETTINGS]  and  press  the  ENTER  but-
ton.
5.
 
Press the SELECT 
  button four times to highlight [SECURIT y ] - [SETTINGS] and press the ENTER but-
ton.
  t he Keyword entry screen will be displayed
 
6.   Press the ENTER button.
  t he  s oftware keyboard will be displayed.
7.
  Use  the  same  procedures  as  steps  1  to  8  described  in  the “Assigning  a  Keyword  for  the  first  time”  sec
-
tion to enter “1234”.
  e ach  time  one  number  is  entered,  an “
”  (asterisk)  will  appear.  Keyword  appears  as  asterisks  so  the  real  key-
word is hidden.
8.
 
After entering your keyword, highlight [OK] and press the ENTER button.
  t he  s oftware keyboard will disappear.  t he  s ecurity screen will be displayed.
9.
 
Highlight [ O
N
] and press the SELECT  button to highlight [ O FF].
10.  Press the SELECT  button to highlight [OK] and press the ENTER button.
  t
he 
s
ecurity 
f
unction will be disabled when the projector is turned on next time.
NOTE:  Do  not  forget  your  keyword.  However,  if  you  forget  your  keyword,  NEC  or  your  dealer  will  provide  you  with  your  Release 
Code upon proof of ownership.
4. Convenient Features 
						

							
4
4. Convenient Features
 Limiting Access Level to Available Menu Items
The Account function allows you to manage available menu items by user l\
evel.
The projector has two menu modes: the ADVANCED menu and the BASIC menu.
ADVANCED menu   ..This is the menu that contains all the available menus and commands. Use\
rs with an ADMINISTRATOR or 
ADVANCED account can access the ADVANCED menu.
BASIC menu  ..........This  is  the  basic  menu  that  contains  minimum  essentials  of  menus  and  commands.  Users  with  a  BASIC 
account can access the BASIC menu.
See page 47 for settings available to ADVANCED and BASIC menus.
NOTE: 
•   A user with an ADMINISTRATOR account that has no password set is registered at the factory.
This will allow the user to access the ACCOUNT items without password entry.
Logg  ng On
Logging on your projector
When a user is registered, trying to display the menu will display the LOGON screen, prompting the user to select 
the user and to enter the password.
NOTE: If one user logs on to the projector, any other user cannot log on.
1. 
  Enter a user name.
2. 
  Enter the registered password if you have it.
3. 
  Select [OK].
NOTE:  Do  not  forget  your  password.  If  you  forget  your  password,  ask  your  administrator.  If  your  administrator  forget  the  pass-
word,  ask  NEC  or  your  dealer.  NEC  or  your  dealer  will  provide  you  with  your  Release  Code  (24  character  length)  upon  proof  of 
ownership. 
Logg  ng Off
Logging off your projector
Logging off your projector will prevent an unauthorized user from operat\
ing your projector.
1. 
  From the menu, select [SETUP] 
→ [BASIC] → [LOGOFF].
2. 
 
Select [
y
ES]. 
						

							
47
4. Convenient Features
Creat ng or Add  ng a User
1.   From the menu, select [SETUP] → [INSTALLATION (2)] → [SECURIT y  SETTINGS].
2. 
 
Select [ACCOUNT]-[SETTINGS].
  t
he [
a
CCOU
nt
] setting screen will be displayed.
 
3.    Select [CREATE].
  t
he [ a CCOU nt ] create screen will be displayed.
 
4.  Enter a user name, user type, and password.
•
  A user name must be 16 alphanumeric characters or less (case sensitive)\
.
•
  User type has two options: [ADVANCED] and [BASIC].
•
  Use the software keyboard to enter a password in the NEW PASSWORD entry \
field. 
  a   password  must  be  10  alphanumeric  characters  or  less.  i f  no  password  is  set,  the  user  is  registered  without  a 
password.
•  After entering a password, enter the same password in [CONFIRM PASSWORD]\
 input screen again.
•
  Make a note of your password.
5.
 
Place a checkmark on [ENABLE].
  t he account will be made available.
6.
 
Select [OK].
  t his will complete adding a user.
NOTE: Up to 12 user names can be created. 
						

							
48
4. Convenient Features
Ed t  ng a User (Chang  ng Account Sett  ngs)
1.   From the menu, select [SETUP] → [INSTALLATION (2)] → [SECURIT y  SETTINGS].
NOTE: A user with an ADMINISTRATOR account is recommended to change the account settings.
2.
 
Select [ACCOUNT]-[SETTINGS].
  t he [ a CCOU nt ] setting screen will be displayed.
3.
 
Select a user name you wish to edit.
4. 
 
Select [EDIT].
  t he [ edit ] screen will be displayed.
  e nter your password and press the  enter  button.
  i
f no password is set, simply press the  enter  button without entering any password.
5. 
 
Change the settings and select [OK].
Delet  ng a User
1.   From the menu, select [SETUP] → [INSTALLATION (2)] → [SECURIT y  SETTINGS].
NOTE: A user with an ADMINISTRATOR account is recommended to delete the account settings.
2.
 
Select [ACCOUNT]-[SETTINGS].
  t he [ a CCOU nt ] setting screen will be displayed.
3.
 
Select a user name you wish to delete.
 
4.    Select [DELETE].
  t
he [ delete ] screen will be displayed.
  e
nter your password and press the  enter  button. 
  t
he confirmation screen will be displayed.
5. 
  Select [ y ES].
  t
his will complete deleting the user.
NOTE:  Do  not  forget  your  password.  If  you  forget  your  password,  ask  your  administrator.  If  your  administrator  forget  the  pass-
word,  ask  NEC  or  your  dealer.  NEC  or  your  dealer  will  provide  you  with  your  Release  Code  (24  character  length)  upon  proof  of 
ownership.