NEC Vt800 Projector User Manual

89
6. Using On-Screen Menu
4.  Select [OK] and press the ENTER button.
  t his will complete the settings.
  You will be returned to the [P r O gra M  list ] screen.
NOTE:
•  Up to 30 different timer settings can be programmed.
• When [PROGRAM TIMER] is turned on, the [STANDBY MODE] setting is ignored.
• The Program Timer is executed on a set time basis, not in a program basis.
•  Once the program not marked with a check in [REPEAT] has been executed, the check mark in the [ACTIVE] check box will be...

90
6. Using On-Screen Menu
Delet ng the programs
1.   On  the  [PROGRAM  LIST]  screen,  select  a  program  number  you  want  to  delete  and  press  the  SELECT 
 
button.
2.
 
Press the SELECT 
 button to select [DELETE].
3.
 
Press the ENTER button.
  t
he confirmation screen will be displayed.
4. Select [
y
ES] and press the ENTER button.
  t
he program will be deleted.
   
t his will complete deleting the program.
Us  ng [CORNERSTONE]
(→ page 36)
Us ng [ENTRY LIST]
(→ page 73)...

91
6. Using On-Screen Menu
Logg ng Off Your  p rojector [LOGOFF]
This feature allows you to log off your projector without turning it off\
.
Logging off your projector will prevent an unauthorized user from operat\
ing your projector.
To log off your projector, follow the steps below.
1.
  Press the MENU button and use the SELECT 
 button to highlight [SETUP].
 
2.   Use the SELECT  or the ENTER button to highlight [BASIC].
 
3.  Use the SELECT  button to highlight [LOGOFF], and press the ENTER...

9
6. Using On-Screen Menu
[MENU]
Select  ng  m enu Color [C OLOR  S ELECT]
You can choose between two options for menu color: color and monochrome.\
Turn ng On / Off Source D  splay,  m essage and T  me [SOURCE DIS p LAY], [ m ESSAGE DIS p LAY], 
[TI m E DIS p LAY], [ID DIS p LAY]
SOURCE  DISPLA y   .......  This option turns on or off input name display such as Computer 1, Computer 2, HDMI, Video, and No 
Input to be displayed on the top right of the screen.
MESSAGE  DISPLA y...

9
6. Using On-Screen Menu
[INSTALLATION(1)]
Select  ng  p rojector Or  entat  on [O RIENTATION]
This  reorients  your  image  for  your  type  of  projection.  The  options  are:  desktop  front  projection,  ceiling  rear  projec-
tion, desktop rear projection, and ceiling front projection.
DESKTOP   FRONT
C EILING   REAR
D ESKTOP   REAR
C EILING   FRONT 

94
Select ng Aspect Rat  o and  p os  t  on for Screen [S CREEN]
SCREEN  Ty PE   .......Select  one  of  two  options:  4:3  SCREEN  or  WIDE  SCREEN  for  the  screen  to  be  used.  See  also  [ A SPECT  
R ATIO
].
(→ page 80)
P
OSITION
 
..............
This feature allows you to adjust the vertical position of the image when WIDE SCREEN has been selected 
for the screen type.
When WIDE SCREEN has been selected there is no-signal area above and below the image.
NOTE: This option is...

95
6. Using On-Screen Menu
INSTALLATION(2)
[NETWORK SETTINGS]
This feature allows you to set various setting items when the projector \
is used on your network.
CAUTION•   Consult with your network administrator about these settings.
h
nts on  h ow to Set Up LAN Connect  on
To configure the projector to communicate on the network using the LAN\
 port (RJ-45):1.   Select the [
WIRED] tab for the LAN port (RJ-45).  
2.
 
On the [
WIRED] tab, select a number from the [ P ROFILES] list for your...

9
6. Using On-Screen Menu
To receive error messages or information on the remaining lamp life via \
e-mail:
1.   On the [ M
AIL
] tab, select [A LERT  M AIL] and press the ENTER button. A check mark will be placed. 
2.
 
Set  [ S
ENDER
’
S
  A
DDRESS
],  [ SMTP  S ERVER   N AME]  and  [R ECIPIENT ’ S   A DDRESS].  Select  [OK]  and 
press the ENTER button.
 
(
→ page 100)
[GENERAL]
This page allows you to specify a unique projector name and to check the\
 current status of the LAN settings. 

97
[pROJECTOR  N A m E]
Specify a unique projector name. Press  to display the software keyboard and type in. Up to 16 alphanumeric 
characters, signs and symbols can be used. After entering a name, select\
 [OK] and press the ENTER button.
NOTE: The [PROJECTOR NAME] will not be affected even when [RESET] is don\
e from the menu.
Us  ng Software Keyboard
1 to 0 and
Characters   .......Use to type in password or keyword.
MODE  ....................Selects one of three modes for numbers, alphabet and...

98
6. Using On-Screen Menu
[WIRED]
Profiles (for LAN port [RJ-45]):
Up to two settings for the LAN port (RJ-45) can be stored in memory of\
 the projector.
Select [P ROFILE  1] or [P ROFILE  2] and then do settings for [DHCP] and the other options. 
After doing this, select [OK] and press the ENTER button. This will stor\
e your settings in memory.
To recall the settings from memory:
After selecting the [WIRED] tab, select the [PROFILE 1] or [PROFILE 2] f\
rom the [PROFILES] list.
Select [OK] and press...