NEC Vt800 Projector User Manual

49
L Operation Using an HTTP Browser
Overview
The  use  of  HTTP  server  functions  will  allow  control  of  the  projector  from  a  web  browser  without  the  installation  of 
special software. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version for the web browser. (This 
device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting meth-
od will vary depending on the version of browser. Please refer to the help files and the...

50
Structure of the HTTP Server
POWER: This controls the power of the projector.
ON  .....................................Power is switched on.
OFF   ...................................Power is switched off.
VOLUME: This controls the volume of the projector.
    .....................................Increases the volume adjustment value.
    .....................................Decreases the volume adjustment value.
AV-MUTE: This controls the mute function of the projector.
PICTURE ON...

51
SOURCE SELECT: This switches the input connector of the projector.C OMPUTER  1   ...................
Switches to the COMPUTER 1 IN connector.
C
OMPUTER
 2
 
...................
Switches to the COMPUTER 2 IN connector.
HDMI   .................................Switches to the HDMI IN connector.
V
IDEO
 
...............................
Switches to the VIDEO IN connector.
S- V IDEO   ...........................Switches to the S-VIDEO IN connector.
V
IEWER
 
............................
Switches to the...

5
M Projecting Your Computer’s Screen Image from the Projector  
via a Network [NETWORK PROJECTOR]
A  Windows  Vista-based  computer  can  be  operated  using  the  projector  over  a  network.  The  projector  supports  the 
Network Projector function and the Remote Desktop function of Windows Vi\
sta. 
By selecting the projector connected to the same network as that of your PC, the PC screen image can be project-
ed to the screen via network. There is no need of connection using the V\
GA signal...

5
4. Convenient Features
2.   Press the SELECT  or  button to select [NETWORK] and press the ENTER button.
  i
n the screen, the [
net
WO
r K] menu is displayed.
 
3.    From the [NETWORK] menu, select [NETWORK PROJECTOR].
  t
he [P r OJ e C t O r   na M e / dis P la Y  res O l U ti O n /P ass WO rd /U rl ] will be displayed.
 
TIP:
•  To change the default password “1234”, select [CHANGE] and press th\
e ENTER button.
 
The [ENTER PASSWORD] screen will be displayed, Enter a numeric password. The...

54
4. Convenient Features
Chang

ng the resolut

on of W

ndows V

sta screen to the 

nformat

on on [DIS p LAY RESOLUTION] 

n the NETWORK 
p
ROJECTOR screen.
1.   Click [Start] from the desktop of Windows Vista.
2.   Click [Control Panel].
3.
  Click [Adjust screen resolution] displayed under [Appearance and Personalization].
4.
  Operate [Resolution] slide bar to change the resolution to the resolution displayed on [DISPLA y  RESO
-
LUTION] in the NETWORK PROJECTOR...

55
4. Convenient Features
5.  Click [→ Search for a projector (recommended)].
  i
n the “
a
vailable projectors” box, your projector model name is displayed.
6.
 
Click your projector model name.
  t
he message “ e nter the password for the projector that you selected.” is displayed at the bottom of the window.
7.
 
Check the password displayed in the screen projected by the projector.
8.
 
Input the password to the password input box displayed by the operation at Step 7.
 
9.   Click [Connect].
  t he...

5
4. Convenient Features
N Using the Projector to Operate Your Computer via a Network 
[REMOTE DESKTOP]
•  By  selecting  the  PC  connected  to  the  same  network  as  that  of  the  projector,  the  PC  screen  image  can  be  pro-
jected to the screen via network.
 
Then,  by  operating  the  keyboard  connected  to  the  projector,  you  can  operate  Windows  Vista  on  the  PC  con
-
nected with the network.
•
 
With the Remote Desktop function, you can remotely operate the PC placed\
 at a...

57
4. Convenient Features
Sett

ng the password to the user account of W

ndows V

sta
TIP: If a password has been set for an account, the steps 1 to 9 can be skip\
ped.
1.
 
Click [Start] from the desktop of Windows Vista.
2.
 
Click [Control Panel].
3.
 
Click [Add or remove user accounts] displayed under [User Accounts].
4.
 
When the [User Account Control] confirmation window appears, click [Continue].
5.
 
Click [Administrator].
6.
 
Click [Create a password].
7.
 
Input the password...

58
4. Convenient Features
4.  Click [View status] displayed in blue on the right of [Local Area Connection] in the window.
  t he [ l ocal  a rea Connection  s tatus] window appears.
 
5.  Click [Details...].
  Write down the value for “ i Pv4  i P  a ddress” (xxx.xxx.xxx.xxx) displayed.
 
6.  Click [Close].
7.   Click [X] at the upper right of the window.
  t he system goes back to the desktop.
Start  ng the Remote Desktop
1.  With the projector turned on, press the SOURCE button.
  t he input...