NEC Visualink 128/384 Director Guide

NDA-24248 Revision 1.0Page 7-7
VisuaLink 128/384 Director Guide Chapter 7
E. Search Up
After you specify the search text or highlight one item on the list, click Search Up
 
button to start searching the texts from the highlighted item to the top of the list. 
Matched text will be highlighted. If there are no matches, no message will appear.
F.  Detail
Click the Detail
 button to display more caller information on the selected item. 
Click Close
 to close the Detail
 dialog and revert to Phonebook...

Page 7-8NDA-24248 Revision 1.0
Chapter 7 VisuaLink 128/384 Director Guide
7.4 Connect Line 
(Receiving)There are three (3) different modes the VisuaLink can be set to when receiving a 
call.
• Manual Receiving
• Auto Receiving
• Select Receiving
7.4.1  Manual Receiving
The Manual Receiving Mode allows the user to accept or deny the incoming call.
Operation
Receiving Notification
 dialog will appear when you receive an incoming call is 
received.
Figure 7-5:   Manual Receiving Notification
A. Phone...

NDA-24248 Revision 1.0Page 7-9
VisuaLink 128/384 Director Guide Chapter 7
7.4.2  Auto Receiving and Select Receiving
Auto Receiving mode allows all incoming calls to be automatically answered.  
Select Receiving mode will accept automatically those callers that are entered in 
the Phonebook
.  All other incoming calls are aborted.
Operation
Receiving Notification
 dialog appears when you receive a incoming call.
Figure 7-6:   Automatic Receiving Notification
A. Phone Number
Displays the remote site dial...

Page 7-10NDA-24248 Revision 1.0
Chapter 7 VisuaLink 128/384 Director Guide
7.5 Disconnect Line
To stop a conference, you need to disconnect the line. The system will forcibly 
stop the conference if participant disconnects the line. When a data conference 
takes place, you can withdraw from the conference by disconnecting the line.
7.5.1  Line Disconnect Request
The local site will hang up with the remote site
Click Disconnect Line
 icon on the Standard Toolbar
. 
Figure 7-7:   Disconnect Line Icon
Or...

NDA-24248 Revision 1.0Page 7-11
VisuaLink 128/384 Director Guide Chapter 7
7.5.2  Line Disconnection
Line Disconnection
 dialog appears when the line disconnection occurs. Line 
Disconnection
 dialog contains communication time, charge, and cause of 
disconnection. 
Figure 7-10:   Line Disconnection
Click OK (O)
 button to close Line Disconnection
 dialog.
When Line Disconnection
 dialog appears, the system will automatically abort the 
conference. 

Page 7-12NDA-24248 Revision 1.0
Chapter 7 VisuaLink 128/384 Director Guide
This page is for your notes. 

NDA-24248 Revision 1.0Page 8-1
VisuaLink 128/384 Director Guide Chapter 8
Chapter 8   Conference Related Functions
8.1 Video Control
This sets the setting for PIP position, the display output image and image to be 
transmitted to the far end.
8.1.1  Video Control
Operation
Select Conference
 | Video Control 
from the Main Menu
.
Figure 8-1:   Conference | Video Control Menu
Video Control
 dialog appears. 
This dialog displays the current setting values.
Figure 8-2:   Video Control Screen
A.  Local and...

Page 8-2NDA-24248 Revision 1.0
Chapter 8 VisuaLink 128/384 Director Guide
B.  Monitor Switch
Click Sending Image
, Receiving Image
, or Snap
 radio button to switch the 
image output being viewed on the monitor.
Sending Image: Displays the local image on the local monitor.
Receiving Image: Displays the remote image on the local monitor.
Snap Image: Displays the last sent or received snap shot image.
C.  PIP ON
Use this checkbox to display/hide the PIP (secondary screen that displays 1/9 size 
of local...

NDA-24248 Revision 1.0Page 8-3
VisuaLink 128/384 Director Guide Chapter 8
Vo l u m e
 and Mic. OFF
 display will be shown.
Figure 8-4:   Audio Control
A.  Receiving Volume
Click and drug the arrow to adjust the receiving volume.
B.  Mic. OFF
Use this checkbox to switch the microphone ON or OFF. To turn the microphone 
OFF, check this checkbox.
Click Close
 to close Audio Control
 dialog.
A
B 

Page 8-4NDA-24248 Revision 1.0
Chapter 8 VisuaLink 128/384 Director Guide
8.2 Camera Control
Follow the operation below to control remote/local camera.
Operation
Select Conference
 | Camera Control
 from the Main Menu
.
Figure 8-5:   Conference | 
Camera Control
Camera Control
 dialog appears.
Figure 8-6:   Camera Control
A. Camera Select
Use these radio buttons to select the camera you wish to control. 
B. Tilt
Use these buttons to control the camera position: Up/Down/Left/Right/Upper 
Right/Lower...