NEC Projector VE303X User Manual

54
 SECURITY
 OFF: Choose “OFF” to be able to switch on the projector 
without password verification.
 ON: Choose “ON” to use security verification when turning on 
the projector.
SECURITY
OFFON
ENTER CURRENT SECURITY CODE
SECURITY KEYWORD
EXIT
ENTER
INVALID-KEYWORD TOO SHORT
 
First Time: 
1. The default password : puqt
2. Use the remote to enter your password, and then press 
ENTER to confirm your password.
 TEST PATTERN
Press ENTER to make the selection. Then press MENU or EXIT to 
close the sub...

55
SECURITY
ADJUSTEXIT
SECURITYOFFSECURITY TIMERCHANGE PASSWORD
SELECTMOVE
 SECURITY TIMER
Use this function to set how long (MONTH/DAY/HOUR) the 
projector can be used. Once this time has elapsed you will be  
requested to enter your password again.
 
MONTHEXITMOVE ADJUST
SECURITY TIMER
D AY
HOUR
EXIT
The “SECURITY TIMER” will restart to count down when the 
projector is turned off and then turned back on.
 CHANGE PASSWORD
1.  Press ENTER to enter SECURITY KEYWORD setting.
2.  The password has to be...

56
4. Use direction keys, to enter your new password and then 
press ENTER to confirm your password. 
 Confirm new password 
CONFIRM NEW SECURITY CODE
CHANGE PASSWORD
EXITENTER
5. Enter the new password again and press ENTER to 
confirm. 
 If the incorrect password is entered 3 times, the projector will 
automatically shut down. (When turn on the projector.)
 If you have forgotten your password, please contact your local 
office for support. 
English ... 
User Controls  

57
SCREENIMAGESETTINGSOPTIONSGENERALLAMP SETTINGS
INPUT SEARCHINPUTFAN MODEINFORMATION HIDEID DISPLAYBrilliantColor™RESET
OFF
OFF
COMPUTERSELECTEXITMOVEMOVE
OFFBLUE
AUTO
 INPUT SEARCH
 O N: The projector will search for other signals if the current input signal is lost. 
 OFF: The projector will only search current input connection.
INPUT SEARCH
OFF
ON
 INPUT
Use this option to enable / disable input sources. Press ENTER to 
enter the sub menu and select which sources you require. Press 
the ENTER...

58
 FAN MODE
  AUTO: The built-in fans automatically run at a variable speed 
according to the internal temperature.
  HIGH ALTITUDE: The built-in fans run at high speed. Select 
this option when using the projector at altitudes approximately 
2500 feet/760 meters or higher.
FAN MODE
AUTO
HIGH ALTITUDE
 INFORMATION HIDE
 ON: Choose “ON” to hide the info message.
 OFF: Choose “OFF” to show the “SEARCHING” message.
INFORMATION HIDE
OFF
ON
 ID DISPLAY
Use this feature to display the ID number which is...

59
	(*) Except “LANGUAGE”, “LOGO”,  “SECURITY”, “FAN MODE”, “BACKGROUND COLOR”,  “LAMP LIFE REMAINING”,  and “LAMP HOURS USED”.
 RESET
Choose “YES” to return the display parameters on all menus to 
the factory default settings. (*)
ARE YOU SURE ?
YES NO 
... English 
User Controls  

60
SCREENIMAGESETTINGSOPTIONSGENERALLAMP SETTINGS
LAMP LIFE REMAININGLAMP HOURS USEDECO MODELAMP LIFE REMINDERCLEAR LAMP HOURSOFF
COMPUTERSELECTEXITMOVEMOVE
OFF
 LAMP LIFE REMAINING
Showing the Lamp life.
 LAMP HOURS USED
Display the projection time.
 ECO MODE
Choose “ECO” to dim the projector lamp which will lower power 
consumption and extend the lamp life. Choose “OFF” to return to 
normal mode.
ECO MODEOFF
ECO
OPTIONS | 
LAMP SETTINGS 
English ... 
User Controls  

61
 LAMP LIFE REMINDER
Choose this function to show or to hide the warning message 
when the changing lamp message is displayed.  
The message will appear when the lamp has reached the end of its 
life. 
LAMP LIFE REMINDEROFF
ON
USE THE SPECIFIED LAMP
FOR SAFETY AND PERFORMANCE.
ARE YOU SURE ?
YES NO
 CLEAR LAMP HOURS
Reset the lamp hour counter after replacing the lamp. 
... English 
User Controls  

62
 INFORMATION
To display the projector information for model no., serial number, 
source, resolution, software version, and control ID on the screen.
SCREENIMAGESETTINGSOPTIONSINFORMATIONADVANCED
MODEL NO.SERIAL NUMBERSOURCERESOLUTIONSOFTWARE VERSION
COMPUTERSELECTEXITMOVEMOVE
CONTROL IDOPTIONS | 
INFORMATION 
English ... 
User Controls  

63
SCREENIMAGESETTINGSOPTIONSINFORMATIONADVANCED
DIRECT POWER ONAUTO POWER OFF (MIN)OFF TIMER (MIN)CONTROL PANEL LOCKCONTROL ID
COMPUTERSELECTEXITMOVEMOVE
OFF
OFF
 DIRECT POWER ON
Choose “ON” to activate Direct Power mode. The projector will 
automatically power on when AC power is supplied, without 
pressing the  button on the projector control panel or the 
“POWER ON” button on the remote control.
DIRECT POWER ONOFF
ON
 AUTO POWER OFF (MIN)
Sets the countdown timer interval. The countdown timer will...