NEC Projector VE303X User Manual

34
Menu Tree 
MAIN MENUSUB MENUSETTINGS
IMAGE
GENERAL
PICTURE MODEPRESENTATION/HIGH-BRIGHT/VIDEO/ MOVIE/ sRGB/ BLACKBOARD/ USER1/ USER2
WALL COLOROFF/ RED/ GREEN/ BLUE/ CYAN/ MAGENTA/ YELLOW
BRIGHTNESS0~100
CONTRAST0~100
SHARPNESS0~31
SATURATIONDEPEND ON SOURCE FORMAT
HUEDEPEND ON SOURCE FORMAT
ADVANCED
GAMMAFILM/ VIDEO/ GRAPHICS/ PC/ BLACKBOARD
BrilliantColor™0~10
COLOR TEMP.LOW/ MEDIUM/ HIGH
DYNAMIC CONTRASTON/ OFF
COLORRED GAIN/ GREEN GAIN/ BLUE GAIN/ CYAN GAIN/ MAGENTA GAIN/ YELLOW GAIN/ RED BIAS/...

35
MAIN MENUSUB MENUSETTINGS
SETTINGS
GENERAL
ORIENTATIONDESKTOP FRONT/ DESKTOP REAR/ CEILING FRONT/ CEILING REAR
HDMI SETTINGSVIDEO LEVEL (AUTO/NORMAL/ ENHANCED) /AUDIO SELECT (HDMI/COMPUTER)
MUTEON/OFF
VOLUME0~20
SIGNAL
PHASEDEPEND ON SOURCE FORMAT
CLOCKDEPEND ON SOURCE FORMAT
H. POSITIONDEPEND ON SOURCE FORMAT
V. POSITIONDEPEND ON SOURCE FORMAT
ADVANCED
LOGOON/OFF
CLOSED CAPTIONOFF/CC1/CC2/CC3/CC4/T1/T2/T3/T4
SECURITYSECURITY/SECURITY TIMER/ CHANGE PASSWORD
TEST PATTERN
OPTIONS
GENERAL
INPUT...

36
MAIN MENUSUB MENUSETTINGS
OPTIONS
INFORMATION
MODEL NO.
SERIAL NUMBER
SOURCE
RESOLUTION
SOFTWARE VERSION
CONTROL IDENABLE TO SELECT DEPENDS ON SETTING OF CONTROL ID OF “OPTIONS” “ADVANCED”
ADVANCED
DIRECT POWER ONON/OFF
AUTO POWER OFF (MIN)0~180
OFF TIMER (MIN)0~995
CONTROL PANEL LOCKON/OFF
CONTROL ID 
English ... 
User Controls  

37
 PICTURE MODE
There are many factory presets optimized for various types of 
images. Use the  or  button to select the item. 
PICTURE MODEPRESENTATION
HIGH-BRIGHT
MOVIE VIDEO
sRGB
BLACKBOARD
USER1
USER2
 PRESENTATION: For computer or notebook.
 HIGH-BRIGHT: Maximum brightness from PC input.
 VIDEO: This mode is recommended for typical TV program 
viewing. 
 MOVIE: For home theater.
 sRGB: Standardized accurate color.
 BLACKBOARD: This mode should be selected to achieve 
optimum color settings...

38
 WALL COLOR
Use this function to choose a proper color according to the wall. It 
will compensate the color deviation due to the wall color to show 
the correct image tone.
WALL COLOROFF
RED
BLUE GREEN
CYAN
MAGENTA
YELLOW
 BRIGHTNESS
Adjust the brightness of the image.
Press the  button to darken image.
Press the  button to lighten the image.
BRIGHTNESS
EXIT
EXITADJUST
 CONTRAST
The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the...

39
 SHARPNESS
Adjust the sharpness of the image.
  Press the  button to decrease the sharpness.
  Press the  button to increase the sharpness. 
SHARPNESS
EXIT ADJUST
EXIT
 SATURATION
Adjust a video image from black and white to fully saturated color.
    Press the  button to decrease the amount of saturation in the 
image.
   Press the  button to increase the amount of saturation in the 
image. 
SATURATION
EXIT ADJUST
EXIT
 HUE
Adjust the color balance of red and green.
   Press the  button to...

40
SCREENIMAGESETTINGSOPTIONSGENERALADVANCED
GAMMABrilliantColor™COLOR TEMP.DYNAMIC CONTRASTCOLORCOLOR SPACE
FILM
LOW
COMPUTERSELECTEXITMOVEMOVE
OFF
AUTO
 GAMMA
This allows you to choose a gamma table that has been fine-tuned 
to bring out the best image quality for the input.
  FILM: for home theater.
  VIDEO: for video or TV source.
  GRAPHICS: for image source.
  PC: for PC or computer source.
  BLACKBOARD: for displaying on the blackboard.
 
GAMMA
FILM
VIDEO
PC GRAPHICS
BLACKBOARD
IMAGE |...

41
	The COLOR TEMP. is not available when “HIGH-BRIGHT” or “sRGB” is selected for “PICTURE MODE”.
 BrilliantColor™
This adjustable item utilizes a new color-processing algorithm 
and system level enhancements to enable higher brightness while 
providing true, more vibrant colors. The range is from “0” to 
“10”. If you prefer a stronger enhanced image, adjust toward the 
maximum setting. For a smoother, more natural image, adjust 
toward the minimum setting.
BrilliantColor™EXIT
EXITADJUST
 COLOR TEMP....

42
 COLOR
Press  ENTER into  the  next  menu  as  below  and  then  use  the  or 
 button to select item.
COLOR
RED GAIN
GREEN GAIN
BLUE GAIN
CYAN GAIN
MAGENTA GAIN
YELLOW GAIN
RED BIAS
GREEN BIAS
BLUE BIAS
RESET
   RED GAIN
RED GAIN
ADJUST
EXIT EXIT
   GREEN GAIN
GREEN GAIN
ADJUST
EXIT EXIT
   BLUE GAIN
BLUE GAIN
ADJUST
EXIT EXIT
   CYAN GAIN
CYAN GAIN
ADJUST
EXIT EXIT
   MAGENTA GAIN
MAGENTA GAIN
ADJUST
EXIT EXIT 
English ... 
User Controls  

43
   YELLOW GAIN
YELLOW GAIN
ADJUST
EXIT EXIT
   RED BIAS
RED BIAS
ADJUST
EXIT EXIT
   GREEN BIAS
GREEN BIAS
ADJUST
EXIT EXIT
   BLUE BIAS
BLUE BIAS
ADJUST
EXIT EXIT
   
Use the  or  button to adjust the setting.
    RESET: Choose “YES” to return the factory default settings for 
color adjustments.
RESET
NO
YES
 COLOR SPACE
Select an appropriate color matrix type from AUTO, RGB, or YUV.
COLOR SPACEAUTO
RGB
YUV 
... English 
User Controls