NEC Projector VE303X User Manual

14
Battery Installation
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not place the battery upside down.
• Replace only with the same or equivalent type recommended by the manufacturer.
• Dispose of used batteries according to your local regulations.
1. Press firmly and slide the battery cover off.
2.  Install new batteries (AAA). 
Ensure that you have the 
batteries’ polarity (+/–)...

15
Using the utility software “Virtual Remote Tool” that you can 
download from our web site (http://www.nec-display.com/ 
dl/en/index.html), Virtual Remote screen (or toolbar) can be 
displayed on your computer screen.
This will help you perform operations such as projector’s 
power on or off and signal selection via the computer cable 
(VGA) or serial cable.
Toolbar
Virtual Remote screen
This section provides an outline of preparation for use of 
Virtual Remote Tool.
For information on how to use...

16
Step 1: Install Virtual Remote Tool on the computer
•  Supported OS
Virtual Remote Tool will run on the following operating systems.
Windows 8.1 *1, Windows 8.1 Pro *1, Windows 8.1 Enterprise *1, Windows 8 *1,  Windows 8 Pro *1, Windows 8 Enterprise *1, 
Windows 7 Home Basic, Windows 7 Home Premium, Windows 7 Professional, Windows 7 Enterprise, Windows 7 Ultimate
Windows Vista Home Basic, Windows Vista Home Premium, Windows Vista  Business,
Windows Vista Enterprise, Windows Vista Ultimate
Windows XP...

17
4  If you agree, click “I accept the terms in the license agreement” \
and then 
click “Next”.
Follow the instructions on the installer screens to complete the 
installation.
After the installation is completed, the shortcut icon for Virtual 
Remote Tool will be displayed on the screen.
TIP:Uninstalling Virtual Remote Tool
•   Preparation
        Exit Virtual Remote Tool before uninstallation. To uninstall Virtual 
Remote Tool, the Windows user account must have “Administrator” 
privilege...

18
Step 3: Start Virtual Remote Tool
Start using the shortcut icon
Start from the Start menu
Click [Start] -> [All Programs] or [Programs] -> [NEC Projector 
User Supportware] -> [Virtual Remote Tool] -> [Virtual Remote 
Tool].
When Virtual Remote Tool starts for the first time, “Easy Setup” 
window will be displayed.
Follow the instructions on the screens.
When “Easy Setup” is completed, the Virtual Remote Tool screen 
will be displayed.
TIP:
•  When Virtual Remote Tool starts for the first time, “Easy...

19
Exiting Virtual Remote Tool
1  Click the Virtual Remote Tool icon  on the Taskbar.
The pop-up menu will be displayed.
2 Click “Exit”.
The Virtual Remote Tool will be closed.
Viewing the help file of Virtual Remote Tool
Displaying the help file using the taskbar
1  Click the Virtual Remote Tool icon on the taskbar when Virtual Remote 
Tool is running.
The pop-up menu will be displayed.
2 Click “Help”.
The Help screen will be displayed.
Displaying the help file using the Start Menu.
Click “Start” ->...

20
Controlling the Projector via the Serial Connection
Using the utility software “PC Control Utility Pro 4” that you 
can download from our web site  
(http://www.nec-display.com/dl/en/index.html), the projector 
can be controlled from a computer via the serial connection.
Control Functions
Power On/Off, signal selection, picture freeze, picture mute, 
audio mute, adjusting, error message notification, event 
schedule.
Screen of PC Control Utility Pro 4
This section provides an outline of preparation...

21
Step 1: Install PC Control Utility Pro 4 on the computer
 •  Supported OS - PC Control Utility Pro 4 will run on the following operating systems.
Windows 8.1*1, Windows 8.1 Pro *1, Windows 8.1 Enterprise *1, Windows 8 *1, Windows 8 Pro *1, Windows 8 Enterprise *1,
Windows 7 Home Basic, Windows 7 Home Premium, Windows 7 Professional, Windows 7 Enterprise, Windows 7 Ultimate
Windows Vista Home Basic, Windows Vista Home Premium, Windows Vista Business, Windows Vista Enterprise, Windows Vista Ultimate...

22
Read “END USER LICENSE AGREEMENT” carefully.
4  If you agree, click “I accept the terms in the license agreement” \
and then 
click “Next”.
Follow the instructions on the installer screens to complete the 
installation.
TIP:Uninstalling PC Control Utility Pro 4
•   To uninstall PC Control Utility Pro 4, do the same procedures stated as in 
“Uninstalling Virtual Remote Tool”. Read “Virtual Remote Tool” as “PC 
Control Utility Pro 4”
Step 2: Connect the projector with the computer by a serial cable...

23
Viewing 3D Images
The projector provides 3D images to a user wearing 
commercially available LCD shutter eyeglasses.
CAUTION
Health precautionsBefore viewing, be sure to read health care precautions that may be found in the user’s manual included with your LCD shutter eyeglasses or your 3D compatible content such as DVDs, video games, computer’s video files and the like.To avoid any adverse symptoms, heed the following:- Do not use LCD shutter eyeglasses for viewing any material other than 3D images.-...