NEC Projector PX803UL-BK User Manual

84
Menu ItemDefaultOptions
SETUP NETWORK 
SETTINGS WIRED LAN
PROFILES
DISABLE, PROFILE 1, PROFILE 2
DHCP OFF, ON
IP ADDRESS
192�168�0�10SUBNET MASK255�255�255�0GATEWAY192�168�0�1AUTO DNS OFF, ON
DNS CONFIGURATION
RECONNECT
PROJECTOR NAME PROJECTOR NAME PX803UL Series
DOMAIN HOST NAME
necpj
DOMAIN NAME
ALERT MAIL ALERT MAIL
OFF, ON
HOST NAME
DOMAIN NAME
SENDER'S ADDRESS
SMTP SERVER NAME
RECIPIENT'S ADDRESS 1
RECIPIENT'S ADDRESS 2
RECIPIENT'S ADDRESS 3
TEST MAIL
NETWORK SERVICE HTTP...

85
Menu ItemDefaultOptions
INFO�
USAGE TIMELIGHT HOURS USED
TOTAL CARBON SAVINGS
SOURCE(1) INPUT TERMINAL
RESOLUTION
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SYNC TYPE
SYNC POLARITY
SCAN TYPE
SOURCE NAME
ENTRY NO�
SOURCE(2)
SIGNAL TYPE
VIDEO TYPE
BIT DEPTH
VIDEO LEVEL
LINK RATE
LINK LANE
3D FORMAT
SOURCE(3) INPUT TERMINAL
RESOLUTION
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SYNC TYPE
SYNC POLARITY
SCAN TYPE
SOURCE NAME
ENTRY NO�
SOURCE(4)
SIGNAL TYPE
VIDEO TYPE
BIT DEPTH
VIDEO LEVEL
LINK RATE
LINK LANE
3D...

86
❹ Menu Descriptions & Functions [INPUT]
HDMI
This	projects	the	video	of	the	device	connected	to	the	HDMI	IN	terminal.
DisplayPort
This	projects	the	video	of	the	device	connected	to	the	Display	Port	IN	terminal.
BNC
This	projects	the	video	of	the	device	connected	to	the	video	input	terminal.
(This	projects	the	analog	RGB	signal	or	component	signal.)
BNC(CV)
This	projects	the	video	of	the	device	connected	to	the	BNC	(CV)	video	input	terminal.
(This	projects	the	composite	video	signal.)
BNC(Y/C)
This...

87
Using the Entry List
When	any	source	adjustments	are	made,	the	adjustments	are	automatically	registered	in	the	Entry	List.	The	(adjust-
ment	values	of)	registered	signals	can	be	loaded	from	the	Entry	List	whenever	necessary.
Up	to	100	patterns	can	be	registered	in	the	Entry	List.	When	100	patterns	have	been	registered	in	the	Entry	List,	an	
error	message	is	then	displayed	and	no	additional	patterns	can	be	registered.	You	should	thus	delete	(adjustment	
values	of)	signals	that	are	no	longer	needed....

88
Entering	the	currently	projected	signal	into	the	Entry	List	[STORE]
1. Press the ▲ or ▼ button to select any number.
2. Press the ◀ or ▶	button	to	select	[STORE]	and	press	the	ENTER	button.
 
Calling	up	a	signal	from	the	Entry	List	[LOAD]
Press	the	▲ or ▼	button	to	select	a	signal	and	press	the	ENTER	button.
Editing	a	signal	from	the	Entry	List	[EDIT]
1. Press the ▲ or ▼ button to select a signal you wish to edit.
2. Press the ◀, ▶, ▲, or ▼	button	to	select	[EDIT]	and	press	the	ENTER	button.
	 The...

89
Cutting	a	signal	from	the	Entry	List	[CUT]
1. Press the ▲ or ▼ button to select a signal you wish to delete.
2. Press the ◀, ▶, ▲, or ▼	button	to	select	[CUT]	and	press	the	ENTER	button.
	 The	signal	will	be	deleted	from	the	Entry	List	and	the	deleted	signal	will	be	displayed	on	the	clipboard	at	the	bottom	
of	the	Entry	List.
NOTE:
•	 The	currently	projected	signal	cannot	be	deleted.
•	 When	the	locked	signal	is	selected,	it	will	be	displayed	in	gray	which	indicates	it	is	not	available.
TIP:
•	 Data...

90
❺ Menu Descriptions & Functions [ADJUST]
[PICTURE]
[MODE]
This	function	allows	you	to	determine	how	to	save	settings	for	[DETAIL	SETTINGS]	of	[PRESET]	for	each	input.
STANDARD ������������Saves settings for each item of [PRESET] (Preset 1 through 8)
PROFESSIONAL
 �����Saves all the settings of [PICTURE] for each input� 
NOTE: 
•	 When	[TEST	PATTERN]	is	displayed,	[MODE]	cannot	be	selected.
[PRESET]
This	function	allows	you	to	select	optimized	settings	for	your	projected	image.
You	can	adjust	neutral...

91
[DETAIL	SETTINGS]
[GENERAL]
Storing	Your	Customized	Settings	[REFERENCE]
This	function	allows	you	to	store	your	customized	settings	in	[PRESET	1]	to	[PRESET	8].
First,	select	a	base	preset	mode	from	[REFERENCE],	then	set	[GAMMA	CORRECTION]	and	[COLOR	TEMPERATURE].	
HIGH-BRIGHT ��������Recommended for use in a brightly lit room�
PRESENTATION �����Recommended for making a presentation using a PowerPoint file�
VIDEO ��������������������Recommended for typical TV program viewing�
MOVIE...

92
Selecting	Screen	Size	for	DICOM	SIM	[SCREEN	SIZE]
This	function	will	perform	gamma	correction	appropriate	for	the	screen	size.
LARGE �������������������For screen size of 150"
MEDIUM
 ����������������For screen size of 100"
SMALL
 �������������������For screen size of 50"
NOTE: 
•	 This	function	is	available	only	when	[DICOM	SIM.]	is	selected	for	[DETAIL	SETTINGS].
•	 Correction	value	is	changed	depending	on	projection	images.
Adjusting	Color	Temperature	[COLOR	TEMPERATURE]
This	option...

93
MAGENTAHUE+	DirectionBlue	direction−	DirectionRed	directionSATURATION+	DirectionVivid−	DirectionWeak
CYAN HUE+	DirectionGreen	direction−	DirectionBlue	directionSATURATION+	DirectionVivid−	DirectionWeak
[CONTRAST]
Adjusts	the	intensity	of	the	image	according	to	the	incoming	signal.
[BRIGHTNESS]
Adjusts	the	brightness	level	or	the	back	raster	intensity.
[SHARPNESS]
Controls	the	detail	of	the	image.
[COLOR]
Increases	or	decreases	the	color	saturation	level.
[HUE]
Varies	the	color	level	from	+/−	green	to...