NEC Projector PX803UL-BK User Manual

Projector
PX8 0 3 U L-W H/PX8 0 3 U L- B K
User’s Manual
Model No.
NP-PX803UL-WH/NP-PX803UL-BK 

Ver. 1 11/15
•	 Apple,	Mac,	Mac	OS,	and	MacBook	are	trademarks	of	Apple	Inc.	registered	in	the	U.S.	and	other	countr ies.
•	 Microsoft,	Windows,	Windows	Vista,	Internet	Explorer,	.NET	Fr amework	and	Po werPoint	are	either	a	registered	
trademark	or	trademark	of	Microsoft	Corporation	in	the	United	States	and/or	other	countries.
•	 MicroSaver	is	a	registered	trademark	of	Kensington	Computer	Products	Group,	a	division	of	ACCO	Brands.
•	 Adobe,	Adobe	PDF,	Adobe	Reader,	and	Acrobat	are	either	registered...

i
Important Information
Safety Cautions
Precautions
Please	read	this	manual	carefully	before	using	your	NEC	projector	and	keep	the	manual	handy	for	future	reference.
CAUTION
To	turn	off	main	power,	be	sure	to	remove	the	plug	from	power	outlet.
The	power	outlet	socket	should	be	installed	as	near	to	the	equipment	as	possible ,	and	should	be	easily	
accessible.
CAUTION
TO	PREVENT	SHOCK,	DO	NOT	OPEN	THE	CABINET.
THERE	ARE	HIGH-VOLTAGE	COMPONENTS	INSIDE.
REFER	SERVICING	TO	QUALIFIED	SER VICE	PERSONNEL.
This...

ii
WARNING TO CALIFORNIA RESIDENTS:
Handling	the	cables	supplied	with	this	product	will	expose	you	to	lead,	a	chemical	known	to	the	State	of	California	
to	cause	birth	defects	or	other	reproductive	harm.	WASH	HANDS	AFTER	HANDLING.
RF Interference
WARNING
This	is	a	Class	A	product.	In	a	domestic	environment	this	product	may	cause	radio	interference	in	which	case	the	
user	may	be	required	to	take	adequate	measures.
CAUTION
•	 In	order	to	reduce	any	interference	with	radio	and	television	reception	use	a...

iii
WARNING
•	 Do	not	use	any	other	object	than	the	projector’s	lens	cover	to	cov er	the	lens	while	the	projector	is	on.	Doing	so	
can	cause	the	object	to	get	extremely	hot,	and	possibly	resulting	in	a	fire	or	damage	due	to	the	heat	emitted	
from	the	light	output.
•	 Do	not	place	any	objects,	which	are	easily	affected	by	heat,	in	front	of	the	projector	lens.	Doing	so	could	lead	
to	the	object	melting	from	the	heat	that	is	emitted	from	the	light	output.	
This	projector	can	be	installed	any	angle	within...

iv
•	 Handle	the	power	cord	carefully.	A	damaged	or	frayed	po wer	cord	can	cause	electr ic	shoc k	or	fire .
-	 Do	not	use	any	power	cord	other	than	the	one	supplied	with	the	projector.
-	 Do	not	bend	or	tug	the	power	cord	excessively.
-	 Do	not	place	the	power	cord	under	the	projector,	or	any	heavy	object.
-	 Do	not	cover	the	power	cord	with	other	soft	materials	such	as	rugs.
-	 Do	not	heat	the	power	cord.
-	 Do	not	handle	the	power	plug	with	wet	hands.
•	 Turn	off	the	projector,	unplug	the	power	cord...

v
Precautions when installing or replacing the lens unit sold separately (LENS 
CALIBRATION) 
After	installing	or	replacing	the	lens	unit,	press	either	the	SHUTTER/CALIBRATION	button	on	the	main	unit	or	the	
INFO/L-CALIB.	button	while	pressing	the	CTL	button	on	the	remote	control	to	carry	out	[LENS	CALIBRATION].	(→ 
page	18,	118)	
By	carrying	out	[LENS	CALIBRATION],	the	adjustment	range	of	the	zoom,	focus,	and	shift	of	the	[LENS	MEMORY]	
is	calibrated.	
Contact	your	dealer	to	install	and	replace	the	lens...

vi
	 Applicable	lens	unit:	NP16FL/NP17ZL/NP18ZL/NP19ZL/NP20ZL/NP21ZL/NP31ZL
Horizontal	angle	H
LensZoom
Tele Wide
NP16FL —32.9
NP17ZL 15.521.7
NP18ZL 12.416.1
NP19ZL 7.712.7
NP20ZL 5.37.9
NP21ZL 3.45.4
NP31ZL 27.833.6
Vertical	angle	V
Lens Zoom
Tele Wide
NP16FL —22.0
NP17ZL 9.814.0
NP18ZL 7.810.2
NP19ZL 4.88.0
NP20ZL 3.35.0
NP21ZL 2.13.4
NP31ZL 18.222.5
H
H
V
V
	 Applicable	lens	unit:	NP39ML
Horizontal	angle	H
Lens Zoom
Tele Wide
NP39ML —52.8
Vertical	angle	V
Lens Zoom
Tele Wide
V1 V2
NP39ML —9.6821.52
H...

vii
•	 The	caution	label	and	the	explanatory	label	s	of	the	CLASS	3R	LASER	PRODUCTS	are	stuck	on	the	below	indicated	
positions.
Label	1
Label	2Label	3
Label 3 Label 1
Label 2
Important Information  

viii
•	 Manufacturer's	ID	Label
(For	PX803UL-WH)
(For	PX803UL-BK)
Position	of	the	Manufacturer's	ID	Label
Important Information