NEC Projector PX803UL-BK User Manual
Here you can view all the pages of manual NEC Projector PX803UL-BK User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 151
![Page 151
134
[POWER OPTIONS]
Selecting Power-saving in [STANDBY MODE]
Setting the power consumption in the standby mode.
NORMAL ����������������In the standby mode, the power consumption of the projector is 0�5 W�
In the standby mode, the POWER indicator lights up in red while the STATUS indicator will go off�
• When set to [NORMAL], the following terminals and functions will be disabled. HDMI OUT terminals,
Ethernet/HDBaseT port, LAN function, mail notification function
NETWORK STANDBY...](http://img.usermanuals.tech/thumb/54/100430/w300_projector_manual_9201_d-150.png "Page 151
134
[POWER OPTIONS]
Selecting Power-saving in [STANDBY MODE]
Setting the power consumption in the standby mode.
NORMAL ����������������In the standby mode, the power consumption of the projector is 0�5 W�
In the standby mode, the POWER indicator lights up in red while the STATUS indicator will go off�
• When set to [NORMAL], the following terminals and functions will be disabled. HDMI OUT terminals,
Ethernet/HDBaseT port, LAN function, mail notification function
NETWORK STANDBY...")
134 [POWER OPTIONS] Selecting Power-saving in [STANDBY MODE] Setting the power consumption in the standby mode. NORMAL ����������������In the standby mode, the power consumption of the projector is 0�5 W� In the standby mode, the POWER indicator lights up in red while the STATUS indicator will go off� • When set to [NORMAL], the following terminals and functions will be disabled. HDMI OUT terminals, Ethernet/HDBaseT port, LAN function, mail notification function NETWORK STANDBY...
Page 152
![Page 152
135
Turning On the Projector By Applying Computer Signal [AUTO POWER ON SELECT]
If set to [NETWORK STANDBY], the projector automatically detects the synchronizing signal input from the following
selected terminals and projects the picture accordingly: Computer, HDMI, Displa yPort, HDBaseT , and SLO T.
OFF ������������������������AUTO POWER ON SELECT function will be switch off�
HDMI, DisplayPort, COMPUTER, HDBaseT, SLOT
������������������������������When a computer signal of a selected input terminal...](http://img.usermanuals.tech/thumb/54/100430/w300_projector_manual_9201_d-151.png "Page 152
135
Turning On the Projector By Applying Computer Signal [AUTO POWER ON SELECT]
If set to [NETWORK STANDBY], the projector automatically detects the synchronizing signal input from the following
selected terminals and projects the picture accordingly: Computer, HDMI, Displa yPort, HDBaseT , and SLO T.
OFF ������������������������AUTO POWER ON SELECT function will be switch off�
HDMI, DisplayPort, COMPUTER, HDBaseT, SLOT
������������������������������When a computer signal of a selected input terminal...")
135 Turning On the Projector By Applying Computer Signal [AUTO POWER ON SELECT] If set to [NETWORK STANDBY], the projector automatically detects the synchronizing signal input from the following selected terminals and projects the picture accordingly: Computer, HDMI, Displa yPort, HDBaseT , and SLO T. OFF ������������������������AUTO POWER ON SELECT function will be switch off� HDMI, DisplayPort, COMPUTER, HDBaseT, SLOT ������������������������������When a computer signal of a selected input terminal...
Page 153
![Page 153
136
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [AS-
PECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].
[ALL DATA]
Reset all the adjustments and settings for all the...](http://img.usermanuals.tech/thumb/54/100430/w300_projector_manual_9201_d-152.png "Page 153
136
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [AS-
PECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].
[ALL DATA]
Reset all the adjustments and settings for all the...")
136 Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [AS- PECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN]. [ALL DATA] Reset all the adjustments and settings for all the...
Page 154
![Page 154
137
❽ Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and light module usage. This item has nine pages. The information included
is as follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LIGHT HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
• [TOTAL CARBON SAVINGS]
This displays the estimated carbon saving information in kg. The carbon footpr int factor in the carbon saving cal-
culation is based on the OECD...](http://img.usermanuals.tech/thumb/54/100430/w300_projector_manual_9201_d-153.png "Page 154
137
❽ Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and light module usage. This item has nine pages. The information included
is as follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LIGHT HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
• [TOTAL CARBON SAVINGS]
This displays the estimated carbon saving information in kg. The carbon footpr int factor in the carbon saving cal-
culation is based on the OECD...")
137 ❽ Menu Descriptions & Functions [INFO.] Displays the status of the current signal and light module usage. This item has nine pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LIGHT HOURS USED] (H) [TOTAL CARBON SAVINGS] (kg-CO2) • [TOTAL CARBON SAVINGS] This displays the estimated carbon saving information in kg. The carbon footpr int factor in the carbon saving cal- culation is based on the OECD...
Page 155
![Page 155
138
[SOURCE(2)]
SIGNAL TYPE VIDEO TYPE
BIT DEPTH VIDEO LEVEL
LINK RATE LINK LANE
3D FORMAT
[SOURCE(3)]
INPUT TERMINAL RESOLUTION
HORIZONTAL FREQUENCY VERTICAL FREQUENCY
SYNC TYPE SYNC POLARITY
SCAN TYPE SOURCE NAME
ENTRY NO.
[SOURCE(4)]
SIGNAL TYPE VIDEO TYPE
BIT DEPTH VIDEO LEVEL
LINK RATE LINK LANE
3D FORMAT
5. Using On-Screen Menu](http://img.usermanuals.tech/thumb/54/100430/w300_projector_manual_9201_d-154.png "Page 155
138
[SOURCE(2)]
SIGNAL TYPE VIDEO TYPE
BIT DEPTH VIDEO LEVEL
LINK RATE LINK LANE
3D FORMAT
[SOURCE(3)]
INPUT TERMINAL RESOLUTION
HORIZONTAL FREQUENCY VERTICAL FREQUENCY
SYNC TYPE SYNC POLARITY
SCAN TYPE SOURCE NAME
ENTRY NO.
[SOURCE(4)]
SIGNAL TYPE VIDEO TYPE
BIT DEPTH VIDEO LEVEL
LINK RATE LINK LANE
3D FORMAT
5. Using On-Screen Menu")
138 [SOURCE(2)] SIGNAL TYPE VIDEO TYPE BIT DEPTH VIDEO LEVEL LINK RATE LINK LANE 3D FORMAT [SOURCE(3)] INPUT TERMINAL RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY SYNC TYPE SYNC POLARITY SCAN TYPE SOURCE NAME ENTRY NO. [SOURCE(4)] SIGNAL TYPE VIDEO TYPE BIT DEPTH VIDEO LEVEL LINK RATE LINK LANE 3D FORMAT 5. Using On-Screen Menu
Page 156
![Page 156
139
[WIRED LAN]
IP ADDRESS SUBNET MASK
GATEWAY MAC ADDRESS
[VERSION(1)]
FIRMWARE DATA
SUB-CPU
[OTHERS]
DATE TIME PROJECT OR NAME
MODEL NO. SERIAL NUMBER
CONTROL ID (when [CONTROL ID] is set)
5. Using On-Screen Menu](http://img.usermanuals.tech/thumb/54/100430/w300_projector_manual_9201_d-155.png "Page 156
139
[WIRED LAN]
IP ADDRESS SUBNET MASK
GATEWAY MAC ADDRESS
[VERSION(1)]
FIRMWARE DATA
SUB-CPU
[OTHERS]
DATE TIME PROJECT OR NAME
MODEL NO. SERIAL NUMBER
CONTROL ID (when [CONTROL ID] is set)
5. Using On-Screen Menu")
139 [WIRED LAN] IP ADDRESS SUBNET MASK GATEWAY MAC ADDRESS [VERSION(1)] FIRMWARE DATA SUB-CPU [OTHERS] DATE TIME PROJECT OR NAME MODEL NO. SERIAL NUMBER CONTROL ID (when [CONTROL ID] is set) 5. Using On-Screen Menu
Page 157
![Page 157
140
[HDBaseT]
SIGNAL QUALITY OPERATION MODE
LINK STATUS HDMI ST ATUS
5. Using On-Screen Menu](http://img.usermanuals.tech/thumb/54/100430/w300_projector_manual_9201_d-156.png "Page 157
140
[HDBaseT]
SIGNAL QUALITY OPERATION MODE
LINK STATUS HDMI ST ATUS
5. Using On-Screen Menu")
140 [HDBaseT] SIGNAL QUALITY OPERATION MODE LINK STATUS HDMI ST ATUS 5. Using On-Screen Menu
Page 158
![Page 158
141
❶ Mounting a lens (sold separately)
This projector can be used with 8 kinds of optional lenses (sold separately). The descriptions here are for the NP18ZL
(standard zoom) lens. Mount other lenses in the same manner. See page 182 for lens options.
Important:
• For using the following option lenses, be sure to carry out [LENS CALIBRATION] after replacing the lens. (→ page 18, 118)
NP16FL, NP17ZL, NP18ZL, NP19ZL, NP20ZL, NP21ZL, NP31ZL
WARNING:
(1) Turn off the power and wait for the cooling fan to...](http://img.usermanuals.tech/thumb/54/100430/w300_projector_manual_9201_d-157.png "Page 158
141
❶ Mounting a lens (sold separately)
This projector can be used with 8 kinds of optional lenses (sold separately). The descriptions here are for the NP18ZL
(standard zoom) lens. Mount other lenses in the same manner. See page 182 for lens options.
Important:
• For using the following option lenses, be sure to carry out [LENS CALIBRATION] after replacing the lens. (→ page 18, 118)
NP16FL, NP17ZL, NP18ZL, NP19ZL, NP20ZL, NP21ZL, NP31ZL
WARNING:
(1) Turn off the power and wait for the cooling fan to...")
141 ❶ Mounting a lens (sold separately) This projector can be used with 8 kinds of optional lenses (sold separately). The descriptions here are for the NP18ZL (standard zoom) lens. Mount other lenses in the same manner. See page 182 for lens options. Important: • For using the following option lenses, be sure to carry out [LENS CALIBRATION] after replacing the lens. (→ page 18, 118) NP16FL, NP17ZL, NP18ZL, NP19ZL, NP20ZL, NP21ZL, NP31ZL WARNING: (1) Turn off the power and wait for the cooling fan to...
Page 159
142 4. Turn the lens unit rightward until click is heard. The lens is now fastened onto the projector. TIP: Mounting the lens theft prevention screw Fasten the lens theft prevention screw included with the projector to the bottom of the projector so that the lens cannot be removed easily. Removing the lens Before removing the lens: 1. Turn on the projector and display an image. (→ page 17) 2. Press and hold the SHUTTER/HOME POSITION button over 2 seconds. The lens position will be moved to the home...
Page 160
143 ❷ Making Connections A computer cable, BNC cable (5-core type), HDMI cable , or a DisplayP ort cable can be used to connect to a computer. The connection cable is not enclosed with the projector. Please get ready a suitab le cab le f or the connection. Analog RGB signal connection • Connect the computer cable to the display output terminal (mini D-sub 15 pin) on the computer and the COMPUTER IN terminal on the projector. Please use a computer cable attached with a f errite core . • When connecting...