NEC Projector PX803UL-BK User Manual

74
5.	 Select	[CONTROL]	→	[ON]	and	press	the	ENTER	button.
	 Each	[TOP],	[BOTTOM],	[LEFT],	[RIGHT],	and	[BLACK	LEVEL]	has	its	own	[CONTROL],	[MARKER],	[RANGE],	
and	[POSITION].
•	 For	Projector	A,	set	the	[CONTROL]	for	the	[TOP],	[LEFT]	and[BOTT OM]	to	[OFF].	Similarly	for	Projector	B,	set	
the	[CONTROL]	for	the	[TOP],	[RIGHT]	and	[BOTTOM]	to	[OFF].
②	Adjust	[RANGE]	and	[POSITION]	to	determine	an	area	of	overlapped	edges	of	images	
projected from each projector.
Turning	on	[MARKER]	will	display	markers...

75
1	 Adjust	[RANGE].
	 Use	the	◀	or	▶	button	to	adjust	the	overlapped	area.
TIP:
•	 Adjust	to	overlap	one	projector’	marker	with	the	other	projector’s	marker.
2	 Adjust	[POSITION].
	 Use	the	◀	or	▶	button	to	align	one	edge	with	the	other	edge	of	overlapped	images.
TIP:
•	 When	displaying	a	signal	with	a	different	resolution,	perform	the	Edge	Blending	function	from	the	start.	
•	 Setting	of	[MARKER]	will	not	be	saved	and	return	to	[OFF]	when	the	projector	is	turned	off.	
•	 To	display	or	hide	the	marker...

76
Black Level Adjustment
This	adjusts	the	black	lev el	of	the	ov erlapping	area	and	the	non-ov erlapping	area	of	the	multi-screen	(EDGE	BLENDING).
Adjust	the	brightness	level	if	you	feel	the	difference	is	too	large.
NOTE: 
This	function	is	enabled	only	when	[MODE]	is	turned	on.
Adjustable	area	varies	depending	on	what	combination	of	[TOP],	[BOTTOM],	[LEFT]	and	[RIGHT]	are	turned	on.
Example:	Adjusting	the	Black	Le vel	when	placing	tw o	pr ojectors	side	b y	side
Width	of	overlap
Adjust
	[CENTER] Adjust...

77
9-segmented	portions	for	Black	Level	adjustment
The	center	projector
This	function	adjusts	the	brightness	level	of	9-segmented	portions	for	the	center	projector	and	4-segmented	portions	
for	the	left	bottom	projector	as	shown	below.
TOP-LEFT
BOTTOM-LEFT CENTER-
LEFT TOP-RIGHT
CENTER-RIGHT
BOTTOM-RIGHT
TOP-CENTER
CENTER
CENTER
BOTTOM-CENTER
TOP-RIGHT
CENTER-RIGHT
TOP-CENTER
TIP:
•	 The	number	of	black	level	division	screens	(maximum	of	nine	divisions)	changes	depending	on	the	number	of	edge	blending...

78
5. Using On-Screen Menu
❶ Using the Menus
NOTE:	The	on-screen	menu	may	not	be	displayed	correctly	depending	on	input	signal	and	the	projector	setting.
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE:	The	commands	such	as ENTER,	EXIT,	▲▼, ◀▶	in	the	bottom	show	available	buttons	for	your	operation.
2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu.
3.	 Press	the	ENTER	button	on	the	remote	control	or	the...

79
❷ Menu Elements
Slide	bar
Solid	triangle
Menu	mode
Ta b
Radio	button
HIGH	symbol
LIGHT	MODE	symbol
Menu	windows	or	dialog	boxes	typically	have	the	following	elements:
Highlight �����������������������������Indicates the selected menu or item� 
Solid triangle ����������������������Indicates further choices are available� A highlighted triangle indicates the item is active� 
Ta b ��������������������������������������Indicates a group of features in a dialog box� Selecting on any tab brings its page to...

80
*	 The	asterisk	(*)	indicates	that	the	default	setting	varies	depending	on	the	signal.*1	 The	[GAMMA	CORRECTION]	item	is	available	when	an	item	other	than	[DICOM	SIM.]	is	selected	for	[REFERENCE].*2	 The	[SCREEN	SIZE]	item	is	available	when	[DICOM	SIM.]	is	selected	for	[REFERENCE].*3	 When	[PRESENTATION]	or	[HIGH-BRIGHT]	is	selected	in	[REFERENCE],	the	[COLOR	TEMPERATURE]	is	not	available.*4	 The	[INPUT	RESOLLUTION]	item	is	available	when	either	COMPUTER	or	BNC	signal	is	selected	as	the	input...

81
Menu ItemDefaultOptions
ADJUST VIDEO
NOISE REDUCTION
RANDOM NR
OFFOFF, LOW, MEDIUM, HIGH
MOSQUITO NR OFFOFF, LOW, MEDIUM, HIGH
BLOCK NR OFFOFF, LOW
DEINTERLACE NORMALNORMAL, MOVIE, STILL
CONTRAST 
ENHANCEMENT MODE
AUTOOFF, AUTO, NORMAL
GAIN
SIGNAL TYPE AUTOAUTO, RGB, COMPONENT
VIDEO LEVEL AUTOAUTO, NORMAL, ENHANCED, SUPER WHITE
3D SETTINGS FORMAT
AUTOAUTO, OFF(2D), FRAME PACKING, SIDE BY SIDE(HALF), SIDE 
BY SIDE(FULL), TOP AND BOTTOM, FRAME ALTERNATIVE, LINE 
ALTERNATIVE
L/R INVERT OFFOFF, ON
LENS...

82
Menu ItemDefaultOptions
DISPLAY MULTI 
SCREEN WHITE BALANCE
MODE
OFFOFF, ON
CONTRAST W
CONTRAST R
CONTRAST G
CONTRAST B
BRIGHTNESS W
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
PICTURE SETTING MODE
OFFOFF, ZOOM, TILING
ZOOM HORIZONTAL ZOOM
VERTICAL ZOOM
HORIZONTAL POSITION
VERTICAL POSITION
TILING WIDTH
1 UNIT, 2 UNITS, 3 UNITS, 4 UNITS
HEIGHT 1 UNIT, 2 UNITS, 3 UNITS, 4 UNITS
HORIZONTAL POSITION 1st UNIT, 2nd UNIT, 3rd UNIT, 4th UNIT
VERTICAL POSITION 1st UNIT, 2nd UNIT, 3rd UNIT, 4th UNIT
SETUP MENU...

83
Menu ItemDefaultOptions
SETUP CONTROL TOOLSADMINISTRA-
TOR MODE
MENU MODE
ADVANCEDADVANCED, BASIC
NOT SAVE SETTING VALUES OFFOFF, ON
NEW PASSWORD
CONFIRM PASSWORD
PROGRAM 
TIMER ENABLE
OFFOFF, ON
SETTINGS EDITACTIVE
OFF, ON
D AY SUN, MON, TUE, WED, THU, FRI, SAT, MON-FRI, MON-SAT, EVERY 
D AY
TIME
FUNCTION POWER, INPUT, LIGHT MODE
ADVANCED 
SETTINGS POWER OFFOFF, ON
INPUT HDMIHDMI, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER, 
HDBaseT, SLOT
LIGHT MODE NORMALNORMAL, ECO1, ECO2
REPEAT OFFOFF, ON...