NEC Projector PX700W2 User Manual

							87
•	MOVIE	SETTING
Sets	the	functions	for	a	movie	file.
NameOptionsDescription
SCREEN	SIZEBEST	FITDisplays	the	image 	with 	its 	aspect 	r atio 	in 	the 	projector’ s 	displa y-
able	maximum	resolution.
ACTUAL	SIZEDisplays	the	image	in	its	actual	size.
REPEATOFFTurns	on	or	off	the	repeat	function.
ONE	REPEATRepeats	one	file	only.
ALL	REPEATRepeats	all	files	in	the	current	folder.
TIP
•	 Turning	on	[REPEAT]	will	display	black	screen	during	intermission	between	movies.
•	AUTO	PLAY	SETTING
Sets	auto	pla y 	f or 	slidesho w 	when 	a 	USB 	memor y 	de vice 	is 	inser ted 	into 	the 	USB 	por t 	of 	the 	projector , 	or 	when 	
[VIEWER]	is	selected	for	[SOURCE].
NameOptionsDescription
AUTO	PLAYOFF—
PICTURE
Plays	the	first	still	image	found	in	a	drive.
MOVIEPlays	the	first	movie	found	in	a	drive.
PowerPointPlays	the	first	PowerPoint	file	found	in	a	drive.
TIP
•	 Auto	play 	behavior 	is 	different 	between 	when 	a 	USB 	memor y 	device 	is 	inserted 	into 	the 	USB 	port 	of 	the 	projector 	and 	when 	
[VIEWER]	is	selected	for	[SOURCE].
•	 Auto	play	starts 	for 	the 	first 	found 	file 	supporting 	the 	file 	type 	set 	up 	for 	Auto 	Play . 	The 	file 	will 	be 	sear ched 	in 	the 	drive 	root 	or 	
lower	level.	
•	 When	[VIEWER]	is 	selected 	for 	[SOURCE], 	the 	last 	selected 	file 	will 	be 	automatically 	played 	if 	it 	is 	found, 	or 	the 	last 	selected 	folder 	
will	be	searched	and	the	first	found	file	will	be	automatically	played.
	 To	automatically	play	a	movie	file	in	a	USB	memory,	store	one	movie	file	or	change	its	file	name	so	that	it	can	be	searched	first.
4. Using the Viewer  
						

							88
•	SORT	SETTING
Sets	the	order	of	displaying	thumbnails	or	slides.
NameOptionsDescription
SORT
NAME	(ABC..)Displays	the	files	alphabetically	by	name	in	ascending	order.
NAME	(ZYX..)Displays	the	files	alphabetically	by	name	in	descending	order.
EXT.	 (ABC..)Displays	the 	files 	alphabetically 	b y 	e xtension 	in 	ascending 	order .
EXT.	(ZYX..)Displays	the 	files 	alphabetically 	b y 	e xtension 	in 	descending 	order .
DATE	(NEW)Displays	the	files	in	reverse	chronological	order.
DATE	(OLD)Displays	the	files	in	chronological	order.
SIZE	(BIG)Displays	the	files	in	descending	order	of	its	file	size.
SIZE	(SMALL)Displays	the	files	in	ascending	order	of	its	file	size.
4. Using the Viewer  
						

							89
❹ Projecting data from shared folder
LAN
Shared folder Wireless LAN
Projector
Shared folder
Preparation
For	projector:	
Connect 	 the 	 projector 	 to 	 the 	 network.
For	computer:	Place 	files 	to 	be 	projected 	in 	a 	shared 	f older 	and 	note 	the 	f older’s 	path.	Memor ize 	or 	wr ite 	do wn 	the 	
path	for	later	use.
•	 For	sharing	a	folder,	refer	to	your	user	guide	or	help	file	accompanied	with	your	Windows 	 computer.
•	 Use	a	keyboard	to	give	a	name	to	the	shared	folder	in	alphanumeric	characters.
•	 To	connect	the 	shared 	f older 	be yond 	the 	subnet, 	set 	[WINS 	CONFIGURA TION] 	in 	[NETW ORK 	SETTINGS] 	from 	
the	menu.
•	 Digital	signature	(SMB	signature)	is	not	supported.
Connecting the projector to the shared folder 
1.	 Press	the	VIEWER	 button 	 on 	 the 	 remote 	 control.
 The drive list window will be displayed.
•	 Another	way 	to 	star t 	the 	VIEWER 	is 	to 	press 	the 	SOURCE 	b utton 	a 	f ew 	times 	on 	the 	projector 	cabinet.	(→ page 
21)
4. Using the Viewer  
						

							90
2.	 Displays	the	[OPTIONS]	menu.
 Press the ▼ button to select the 	(OPTIONS)	icon	and	press	the	ENTER	button.
•	 When	the	OPTIONS	menu	is	displayed,	the	drive	list	will	not	be	displayed.
3.	 Display	the	[SHARED	FOLDER	SETTING]	screen.
 Press the ▼ button to select the 	(SHARED	FOLDER	SETTING)	icon	and	press	the	ENTER	button.
4.	 Select	a	folder	number	and	place	to	enable	it.
 Press the ◀ or ▶ button to a shared folder number and press the ▼ button to select [ENABLE] , and then press 
the ENTER button.
5.	 Enter	the	path,	 user 	 name,	 and 	 password 	 for 	 the 	 shared 	 folder.
 Press the ▼ button to select the [SHARED FOLDER] field. The software keyboard will be displayed.
 For using the software keyboard, see page 152.
•	 If	your	computer	is	not	password	protected,	entering	a	password	is	not	required.
•	 Up	to	four	shared	folders	can	be	added.
•	 The	maximum 	length 	of 	a 	path 	of 	the 	shared 	f older 	m ust 	be 	15 	alphan umeric 	char acters 	f or 	computer 	name 	and 	
23 alphanumeric characters for folder name.
 
4. Using the Viewer  
						

							91
6.	 Exit	the	setting.
 Press the ▼ button to select [OK] and press the ENTER button.
 This will close the [SHARED FOLDER] screen.
•	 If	an	error	message	appear,	your	settings	are	not	correct.	Try 	 again.
4. Using the Viewer  
						

							92
Disconnecting the shared folder from the projector
•	 Disable	the	number	of	a	shared	folder	you	wish	to	disconnect
 Press the ▼ button to select [ENABLE] and press the ENTER button to clear it.
NOTE:
•	 When	a	PowerPoint	file	or	PDF	file	is	displayed,	do	not	disconnect	your	LAN	cable.	If	doing	so,	the	Viewer	will	not	work.
TIP:	
•	 Connecting	settings	for	Shared	folder	
	 Settings	of	up	to	four	folders	can	be	saved.
	 Restarting	the	projector	will	display	setting-saved	shared	folders	in	grey	folder	icon	on	the	drive	list	screen.	
	 Selecting	the	grey	icon	folder	will	skip	entry	for	a	folder	path.
•	 Failing	to	connect	with	a	shared	folder	will	display	the	folder	icon	with	“x”	mark.	If	this	happen,	check	your	folder	setting.
4. Using the Viewer  
						

							93
❺ Projecting data from media server
LAN
Media server Media server Wireless LAN
Media server
Projector
Preparation
For	projector:	Connect 	 the 	 projector 	 to 	 the 	 network.
For	computer:	Prepare 	image 	files 	or 	mo vie 	files 	to 	be 	projected, 	and 	set 	up 	“Media 	Shar ing”	in 	Windo ws 	Media 	Pla yer 	
11	or	Windows 	 Media 	 Player 	 12.
NOTE: 
•	 Both	the	projector 	and 	the 	media 	ser ver 	must 	be 	on 	the 	same 	subnet. 	Connecting 	to 	the 	media 	ser ver 	beyond 	the 	subnet 	is 	not 	
possible.
•	 Types	of	images	and	movies	which	can	be	shared	may	vary	depending	on	Windows	version.
Setting up “Media Sharing” in Windows Media Player 11
1.	 Start	Windows 	 Media 	 Player 	 11.
2.	 Select	“Media	 Sharing”	 from 	“Librar y”.
 The “Media Sharing” dialog box will be displayed.
4. Using the Viewer  
						

							94
3.	 Select	“Share	 my 	 media”	 check 	 box,	 and 	 then 	 select 	 OK.	
 A list of accessible devices will be displayed.
4.	 Select	“PX750U	 Series”	 and 	 then 	“Allo w”.
 A check mark will be added to the “PX750U Series” icon.
•	 The	“PX750U	 Series”	 is 	 a 	 projector 	 name 	 specified 	 in 	 [NETWORK 	 SETTINGS].	
5.	 Select	“OK”.
 This will make pictures and video in “Library” available from the projector.
4. Using the Viewer  
						

							95
Setting up “Media Sharing” in Windows Media Player 12
1.	 Start	Windows 	 Media 	 Player 	 12.
2.	 Select	“Stream”,	and 	 then 	 select 	“A utomatically 	 allow 	 devices 	 to 	 play 	 my 	 media”.
 The “Allow All Media Devices” windows will be displayed.
3.	 Select	“Automatically 	 allow 	 all 	 computers 	 and 	 media 	 devices”.
	 Graphics	and	movie	files	in	“Library”	 can 	 be 	 used 	 from 	 the 	 projector.
4. Using the Viewer  
						

							96
Connecting the projector to the media server
Press	the	VIEWER	 button 	 on 	 the 	 remote 	 control.
The	VIEWER	 will 	 start.
•	 Another	way 	to 	star t 	the 	VIEWER 	is 	to 	press 	the 	SOURCE 	b utton 	a 	f ew 	times 	on 	the 	projector 	cabinet.	(→	page	
21)
•	 This	will 	star t 	searching 	f or 	a 	computer 	with 	“media 	shar ing”	enab led 	in 	the 	netw ork 	and 	add 	it 	to 	the 	“Media 	ser ver”	
of	the	thumbnail	screen.
	 Another	way 	to 	do 	this 	is 	to 	point 	the 	cursor 	to 	“Media 	ser ver”	and 	select 	[REFRESH] 	from 	the 	thumbnail 	men u 	
and	press	the	ENTER	button.
NOTE: 
•	 Up	to	four	accessible	media	servers	can	be	automatically	searched	and	displayed.	The	fifth	device	or	later	cannot	be	displayed.
(→	page	77)
4. Using the Viewer