NEC Projector NP3150/NP2150/NP1150 User Manual


5. Using the Viewer
Setting Option for Viewer
PLAY MODE:
MANUAL.................Views.a.slide.manually.when.the.Viewer.source.is.selected.
AUTO......................Plays.back.slides.automatically.when.the.Viewer.source.is.selected.
INTERVAL:
Specifies interval time between 5 and 300 seconds.
START:
Specifies start screen when the Viewer source is selected.
SHOW THUMBNAILS:
Selecting the Viewer source will display a list of thumbnails of graphic files stored in the USB memory when [ON] 
is...

8
Exiting Viewer
To exit Viewer, switch to another input such as Computer 1, Computer 2, Computer 3, Component, Video, S-Video 
or NETWORK.
* To switch to another input, there are two ways:
• Press  the  COMPUTER  1,  COMPUTER  2,  COMPUTER  3,  COMPONENT,  VIDEO,  S-VIDEO  or  NETWORK 
button on the remote control.
• Press  the  MENU  button  on  the  remote  control  to  display  the Viewer  menu.  Press  the  MENU  button  again  to 
display the main menu and select the input from the [SOURCE]...

9
5. Using the Viewer
 Changing Background Logo
You can change the default background logo using the Viewer feature.
NOTE:  File  size  must  be  256KB  or  less.  File  formats  other  than  JPEG,  BMP,  non-interlaced  GIF  or  non-interlaced  PNG  are  not 
available.
Preparation: Store JPEG or BMP files (JPEG, BMP, non-interlaced GIF or non-interlaced PNG files) in a USB mem-
ory into the projector’s USB port.
NOTE: To change highlight from the Thumbnails screen (right window) to a directory...

0
 Using the Menus
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
 
NOTE: The commands such as , ENTER, EXIT in the bottom show available buttons for your operation.
2.  Press the SELECT  buttons on the remote control or the projector cabinet to display the submenu.
3.  Press  the  ENTER  button  on  the  remote  control  or  the  projector  cabinet  to  highlight  the  top  item  or  the 
first tab.
4.  Use  the  SELECT   buttons  on  the...

1
6. Using On-Screen Menu
Using ADVANCED menu and BASIC menu
The projector has two menu modes: the ADVANCED menu and the BASIC menu.
ADVANCED.menu...This.is.the. menu. that.contains. all.the. available. menus.and.commands.. Users.with.an.ADMINISTRAOR. or.
ADVANCED.account.can.access.the.ADVANCED.menu.
BASIC.menu...........This.is.the. basic. menu. that.contains. minimum. essentials. of.menus. and.commands.. Users.with.a.BASIC.
account.can.access.the.BASIC.menu.
See page 50 for settings available to...


 Menu tree
Menu	 	Item
SOURCE. .COMPUTER.1,.COMPUTER.2,.COMPUTER.3,.COMPONENT,.VIDEO,.S-VIDEO,.VIEWER,.NETWORK,.ENTR y.LIST
ADJUST.PICTURE.MODE. STANDARD,.PROFESSIONAL
..PRESET. 1.to.6
...DETAIL.SETTINGS.GENERAL. REFERENCE. HIGH-BRIGHT,.PRESENTATION,.VIDEO,.
... .. . .MOVIE,.GRAPHIC,.sRGB
. .. .. .GAMMA.CORRECTION.DyNAMIC ,.N ATURAL ,.B LACK. DETAIL
. .. .. .COLOR.TEMPERATURE.5000,.6500,.7800,.8500,.9300,.10500
... .WHITE.BALANCE. .CONTRAST.RGB, .BRIGHTNESS.RGB .
. .CONTRAST.. .
....


6. Using On-Screen Menu
Menu	 	Item
SETUP.INSTALLATION.ORIENTATION.DESKTOP.FRONT,.CEILING.REAR,.DESKTOP.REAR,.CEILING.FRONT
. .SCREEN. SCREEN.TyPE:.4:3.SCREEN,.WIDE.SCREEN./.POSITION
..SECURITy.SETTINGS. CONTROL.PANEL.LOCK,.LOGO.LOCK,.ACCOUNT.LOCK,.ACCOUNT,.SECURITy
..NETWORK.SETTINGS.GENERAL:... PROJECTOR.NAME,.WIRED.LAN,.WIRELESS.LAN
. .. .WIRED:...PROFILES,.DHCP,.IP.ADDRESS,.SUBNET.MASK,.GATEWA y,.
. .. .DNS.CONFIGURATION,.RECONNECT
. .....

4
 Menu Elements
slide bar
solid triangle
highlight
tab
radio buttonCheck box
Cancel buttonOK button
menu windows or dialog boxes typically have the following elements:
Highlight.................Indicates.the.selected.menu.or.item..
Solid.triangle..........Indicates.further.choices.are.available..A.highlighted.triangle.indicates.the.item.is.active..
Tab..........................Indicates.a.group.of.features.in.a.dialog.box..Selecting.on.any.tab.brings.its.page.to.the.front....

5
6. Using On-Screen Menu
 Menu Descriptions & Functions [SOURCE]
COMPUTER 1 and 2
Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
NOTE: An optional component cable (Component V or ADP-CV1 cable) is ne\
eded for a component signal.
COMPUTER 3 (RGB Digital)
Selects the computer connected to your COMPUTER 3 (DVI-D) connector.
COMPONENT
Selects what is connected to your COMPONENT IN (Y, Cb/Pb, Cr/Pr).
VIDEO
Selects what is connected to your VIDEO input-VCR,...


6. Using On-Screen Menu
[ENTRY LIST]
Using the Entry List
When any source adjustments are made, the adjustments are automatically registered in the Entry List. The (adjust-
ment values of) registered signals can be loaded from the Entry List whenever necessary.
However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the  
Entry List, an error message is then displayed and no additional patterns can be registered. You should thus delete...