NEC Projector NP3150/NP2150/NP1150 User Manual

9
6. Using On-Screen Menu
To register a USB memory device as a protect key.
preparation: Insert the USB memory device into the USB port (type A) of the projector.
1. Use the SELECT  or  button to select [USE PROTECT KEY] and press the ENTER button.
2.  Use the SELECT  or  button to select [READ] and press the ENTER button.
  Data of the USB memory will be read into the projector.
3. Use the SELECT  or  button to select [REGISTER] and press the ENTER button.
  Downloaded data will be...

98
6. Using On-Screen Menu
•  the  security  disable  mode  is  maintained  until  the  main  power  is  turned  off  (by  setting  the  main  power  switch 
to “O” or unplugging the power cord). in the following cases you will be asked to check the protect key or input 
the password:
(1) When [OK] is selected at an image for which security is set and the power is turned off then back on
(2) When the main power is turned off then back on while the security function is enabled
(3) When you attempt to...

99
6. Using On-Screen Menu
[NETWORK SETTINGS]
This feature allows you to set various setting items when the projector is used on your network.
CAUTION
• Consult with your network administrator about these settings.
• The  NP3150/NP2150/NP1150  series  projectors  distributed  in  some  areas  and  countries  do  not  come 
standard with the USB Wireless LAN Unit.
 If you purchase the projector without the USB Wireless LAN Unit installed and need to present to the pro-
jector via a wireless connection,...

100
6. Using On-Screen Menu
To receive error messages or information on the remaining lamp life via e-mail:
1. On the [MAIL] tab, select [ALERT MAIL] and press the ENTER button. A check mark will be placed. 
2.  Set  [SENDER’S  ADDRESS],  [SMTP  SERVER  NAME]  and  [RECIPIENT’S  ADDRESS].  Select  [OK]  and 
press the ENTER button.
  (→ page 107)
To execute [Easy Connection] using Image Express Utility 2.0:
The [Easy Connection] is a mode that can abbreviate the troublesome LAN settings when using the...

101
[pROJECTOR NAmE]
Specify a unique projector name. Press  to display the software keyboard and type in. Up to 16 alphanumeric 
characters, signs and symbols can be used. After entering a name, select [OK] and press the ENTER button.
NOTE: The [PROJECTOR NAME] will not be affected even when [RESET] is don\
e from the menu.
Using Software Keyboard
1.to.0.and
Characters........Use.to.type.in.password.or.keyword....

10
6. Using On-Screen Menu
[WIRED]
Profiles (for LAN port [RJ-45]):
Up to two settings for the LAN port (RJ-45) can be stored in memory of the projector.
Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options. 
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
To recall the settings from memory:
After selecting the [WIRED] tab, select the [PROFILE 1] or [PROFILE 2] from the [PROFILES] list.
Select [OK] and press the...

10
6. Using On-Screen Menu
[WIRELESS]
PROFILES (for USB Wireless LAN unit):
To execute a wireless LAN easily using Image Express Utility 2.0, select [EASY CONNECTION].
Up to two settings for the USB wireless LAN unit can be stored in memory of the projector.
Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options. 
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
To recall the settings from memory:
After selecting the...

104
6. Using On-Screen Menu
[ADVANCED] menu
[CONNECTION] (required for wireless only)
SITE SURVEY:
Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access.
To select an SSID, highlight [SSID] and use the SELECT  to select [OK] and press the ENTER button.
 : Wireless access point
 : Ad Hoc PC
 : WEP or WPA enabled
SSID (Network name):
Enter  an  identifier  (SSID)  for  wireless  LAN  when  selecting  [INFRASTRUCTURE]  or  [AD  HOC]  in  [NETWORK 
TYPE]....

105
6. Using On-Screen Menu
[SECURITY] (required for wireless only)
SECURITY TYpE
Select encryption mode for secure transmission.
When [WEP] or [DISABLE] is selected in [SECURITY TYPE]:
Select  this  option  whether  using  the WEP  (Wired  Equivalent  Privacy)  key  for  encryption  or  not. To  use  encryp-
tion, specify WEP key.
DISABLE.................Will.not.turn.on.the.encryption.feature..your.communications.may.be.monitored.by.someone....

10
6. Using On-Screen Menu
Using Software Keyboard to enter an encryption key
1. Select one of [KEY 1], [KEY 2], [KEY 3] and [KEY 4] and press the ENTER button.
  The software keyboard will be displayed.
 
2. Use the SELECT   button to select one key and press the ENTER button.
3.  After finishing entering the WEP key, use the SELECT  button to select [OK] and press the EN-
TER button.
  The software keyboard will disappear.
When [WPA-PSK] or [WPA2-PSK] is selected in [SECURITY TYPE]:...