NEC Projector NP3150/NP2150/NP1150 User Manual


4. Convenient Features
 Using the Optional Remote Mouse Receiver (NP01MR)
The optional remote mouse receiver enables you to operate your computer’s mouse functions from the remote con-
trol. It is a great convenience for your computer-generated presentations.
Connecting the remote mouse receiver to your computer
If you wish to use the remote mouse function, connect the mouse receiver and computer.
The mouse receiver can be connected directly to the computer’s USB port (type A).
NOTE:...

8
4. Convenient Features
Operating your computer’s mouse from the remote control
You can operate your computer’s mouse from the remote control.
PAGE.UP/DOWN.Button....................scrolls.the.viewing. area.of.the. window. or.to.move. to.the. previous. or.next. slide. in.Power-
Point.on.your.computer.
SELECT..Button...................moves.the.mouse.cursor.on.your.computer.
MOUSE.L-CLICK.Button...................works.as.the.mouse.left.button....

9
 Correcting Horizontal and Vertical Keystone Distortion (Cor-
nerstone)
Use the 3D Reform feature to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right 
side of the screen longer or shorter so that the projected image is rectangular.
4. Convenient Features
Projected image
Cornerstone
1. Press and hold the 3D REFORM button for a minimum of 2 seconds to reset current adjustments.
  Current adjustments for [KeYst One] or [COrnerst One] will be cleared.
2....

40
8. Press the ENTER button.
4. Convenient Features
10. Press the SELECT  or  button to highlight the [OK] and press the ENTER button.
This completes the Cornerstone correction.
Selecting [CANCEL] will return to the adjustment screen without saving changes (Step 3).
Selecting [RESET] will return to the factory default.
Selecting [UNDO] will exit without saving changes.
NOTE: To reset the 3D Reform correction setting values, press and hold the 3D R\
EFORM button for a minimum of 2 seconds.
NOTE:...

41
4. Convenient Features
* The following are conditions under which the maximum angle is achieved:
•  When the standard lens is used
• When the lens shift is set to the center
 When  the  lens  shift  is  used  and  yet  the  image  is  not  displayed  in  the  center  of  the  screen,  the  adjustable 
range will be increased or decreased.
• Image is projected in Wide (Zoom lever)
NOTE: 
• If the Cornerstone screen is unavailable (grayed), press and hold the 3D REFORM button for a minimum of 2 seconds...

4
4. Convenient Features
9 Using Picture in Picture (PIP) Function
The projector has a feature that allows you to view two different signals simultaneously. This feature is called as Pic-
ture in Picture (PIP). 
From the menu you can select [SETUP] → [BASIC] → [PIP]. 
NOTE: 
• The Magnify and [SCREEN] setting are not available in PIP mode.
• Adjusting for picture and sound is available for the main picture only.
• To turn on PIP mode while in Picture Mute or Freeze, Picture Mute and Freeze will be...

4
4. Convenient Features
Viewing a sub picture in the main picture
You can use the PIP button on the remote control to view a sub picture in the main picture.
To do so, follow the steps.
1.  Press the PIP button on the remote control.
  the sub picture will be displayed in the main picture.
sub picture
2.  Press the PIP button again to display the main picture only.
NOTE: The main picture’s sound will be output. 

44
4. Convenient Features
 Preventing Unauthorized Use of the Projector
Assigning a keyword prevents the projector from being used by unauthorized individuals.
Assigning a Keyword for the first time
1. Press the MENU button.
  The menu will be displayed.
 
2. Press the SELECT  button to highlight the [SETUP] submenu and press the ENTER button.
  The page tab [BASIC] will be highlighted.
 
3.  Press the SELECT  button twice to highlight the page tab [INSTALLATION]. 

45
4. Convenient Features
4. Press the SELECT  button three times to highlight [SECURITY SETTINGS].
 
5.  Press the ENTER button to display the SECURITY SETTINGS menu.
 
6.  Press the SELECT  button four times to highlight [SECURITY-SETTINGS] and press the ENTER button.
  The Security screen will be displayed.
 
 7. Press the SELECT  button once to highlight the Keyword entry box and press the ENTER button.
  The Software keyboard will be displayed. 

4
4. Convenient Features
8. Enter an alphanumeric keyword using the Software keyboard.
  For example, to enter “1234”, follow the steps 8-1 to 8-4 below.
 
NOTE: 
•  When using your USB mouse, click each number or alphabet. 
BS: Delete the character before the cursor or highlight. 
: Confirm the keyword and close the Software keyboard.
• The keyword must be 1 to 10 characters long.
• Please make a note of your keyword.
• Do not use spaces (SP) in your keyword.
enter a keyword by using the remote...