NEC Np52 Projector User Manual

3
 . Conven  ent Features
To d sable the SECURITY funct  on:
1.   Press the M en U button.
  The menu will be displayed.
2. 
 s elect [ set UP] 
→ [ installati O n ] → [ se CU rit Y] and press the  enter  button.
 The OFF/ON menu will be displayed.
3.   s elect [O ff ] and press the  enter  button.
 The KEYWORD CONFIRMATION screen will be displayed.
4.  t ype in your keyword and press the  enter  button.  
 
When the correct keyword is entered, the SECURITY function will be...

33
. Conven  ent Features
30°
30°
➏ Using the Optional Remote Mouse Receiver (NP01MR)
The	 optional 	 remote 	 mouse 	 receiver 	 enables 	 you 	 to 	 operate 	 your 	 computer’s 	 mouse 	 functions 	 from 	 the 	 remote 	
control. 	 It 	 is 	 a 	 great 	 convenience 	 for 	 clicking 	 through 	 your 	 computer-generated 	 presentations.
Connect ng the remote mouse rece  ver to your computer
If	 you 	 wish 	 to 	 use 	 the 	 remote 	 mouse 	 function, 	 connect 	 the 	 mouse...

3
 . Conven  ent Features
About Drag Mode
By	 pressing 	 the 	 MOUSE-L 	 or 	 MOUSE-R 	 button 	 for 	 2 	 or 	 3 	 seconds 	 then 	 releasing, 	 the 	 drag 	 mode 	 is 	 set 	 and 	 the 	
drag
	 operation 	 can 	 be 	 performed 	 simply 	 by 	 pressing 	 the 	 SELECT 	
▼▲◀▶	 button. 	 To 	 drop 	 the 	 item, 	 press 	 the 	
MOUSE-L
	
(or
	
MOUSE-R)
	
button.
	
To
	
cancel
	
it,
	
press
	
the
	
MOUSE-R
	
(or 	 MOUSE-L) 	 button.
TIP: You can change the Pointer speed on the Mouse...

3
5. Using the Viewer (NP62/NP52)
❶ What you can do with the Viewer
The 	 NP62 	 and 	 NP52 	 have 	 the 	 Viewer. 	
The
	 Viewer 	 has 	 the 	 following 	 features.
•	 When
	 a 	 commercially 	 available 	 USB 	 memory 	 that 	 stores 	 image 	 files 	 is 	 inserted 	 into 	 the 	 USB 	 port 	 (Type 	 A) 	 of 	
the 	 projector, 	 the 	 Viewer 	 allows 	 you 	 to 	 view 	 the 	 image 	 files 	 on 	 the 	 USB 	 memory.
	 Even
	 if 	 no 	 computer 	 is 	 available, 	 presentations 	 can 	 be...

3
. Us  ng the V  ewer (NP  /NP  )
NOTE
•
  The NP61 and NP41 do not have the Viewer.
•
  The  USB  port  of  the  NP62  and  the  NP52  does  not  support  USB  hub.  Both  a  USB  memory  and  the  Bluetooth
®  USB  adaptor 
cannot be used at the same time.
•
 
The  following  operations  by  using  the  buttons  on  the  projector  are  not  possible  when  the  VIEWER  screen  such  as  the  slide 
screen and the thumbnail screen is displayed.
-   Keystone...

37
. Us  ng the V  ewer (NP  /NP  )
❷ Projecting images stored in a USB memory device (Basic operation)
This	 section 	 explains 	 the 	 basic 	 operation 	 of 	 the 	 Viewer. 		
The
	 explanation 	 provides 	 the 	 operational 	 procedure 	 when 	 the 	 Viewer 	 [OPTIONS] 	 menu 	 (
→	 page 	41)	 is 	 set 	 to 	 the 	
factory
	
default.
-
	
Starting
	
the
	
Viewer
	
......................................................................
below
-
	
Removing
	
the
	
USB...

38
. Us  ng the V  ewer (NP  /NP  )
5.  Press the  sele C t  ▶ button.
 
The next image will be displayed.
6.
 
Press the 
sele
C
t
 
◀ button.
 
The previous image will be displayed.
7.
 
Press the M
en
U button.
 
The control bar will be displayed.
•
 
Pressing the MENU button during display of the control 
bar  will  display  the  SOURCE  SEL ECT  screen.  Press 
the  MENU  button  again  to  close  the  SOURCE  SELECT 
screen.
•
 
Pressing  the  EXIT  button...

39
. Us  ng the V  ewer (NP  /NP  )
3.  Press  the  sele C t  ◀  to  select  [OK]  and  press 
the 
enter
 button.
 
The  confirmation  message  will  be  displayed  at  the 
center of the screen.
4.
 
Press the  enter  button.
 
The confirmation message will be changed.
5.
  r emove the U s B memory from the projector.
NOTE:  If  you  remove  the  USB  memory  from  the  projector 
without  using  [REMOVE  USB  DEVICE]  from  the  menu,  the 
projector may not operate...

0
. Us  ng the V  ewer (NP  /NP  )
❸ Operating the slide screen
The	 slide 	 screen 	 allows 	 you 	 to 	 perform 	 the 	 following 	 operations.
SELECT ▶ button...............Displays the nex t image.
SELECT ◀ button...............Displays the previous image.
ENTER button  ....................Displays  the  pointer  (   ).  The  pointer  can  be  moved  by  using  the  SELECT ▲▼◀▶  button. 
Press the ENTER button again to close the pointer.
EXIT button...


. Us  ng the V  ewer (NP  /NP  )
Name	Description
①	Path 	 Displays 	 the 	 path 	 of 	 the 	 displayed 	 image. 	 When 	 a 	 USB 	 memory 	 is 	
inserted, 	 the 	 drive 	 name 	 is 	 displayed 	 as 	 [USB]. 	 When 	 the 	Bluetooth	
USB
	
adaptor
	
is
	
inserted,
	
the
	
drive
	
name
	
is
	
displayed
	
as
	
[Bluetooth].
②	 Up 	 directory
Returns 	 to 	 the 	 upper 	 (parent) 	 folder.
③	Images 	 or 	 folder 	 (in 	
thumbnail 	 or 	 icon 	 form)Displays
	 the...