NEC Np52 Projector User Manual


. Installat  on and Connect  ons
VIDEO INCOMPUTER INPC CONTROLAC INAUDIO INS-VIDEO IN
COMPUTER IN
PHONE
PHONE
AUDIO IN
➋ Making Connections
Connect ng Your PC or Mac  ntosh Computer
NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and 
before turning on the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before...

3
 . Installat  on and Connect  ons
AUDIO INL R
AUDIO OUT
LR
Component
Y Cb Cr
VIDEO INCOMPUTER INPC CONTROLAC INAUDIO INS-VIDEO IN
COMPUTER INAUDIO IN
NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements.
Connect ng Your DVD Player w  th Component Output
DVD player
Audio Equipment
Optional 15-pin - to - RCA (female) ×3 cable (ADP-CV1E)
Component video RCA×3 cable (not supplied)
Audio cable (not...


. Installat  on and Connect  ons
AUDIO INL RAUDIO OUTLRVIDEO OUTS-VIDEOVIDEO
VIDEO INCOMPUTER INPC CONTROLAC INAUDIO INS-VIDEO IN
VIDEO IN
S-VIDEO IN
AUDIO IN
Connect ng Your VCR
S-Video cable (not supplied)
Video cable (not supplied)
VCR
Audio equipment
Audio cable (not supplied)
NOTE: Refer to your VCR owner's manual for more information about your equipment's video output requirements.
NOTE: An image may not be displayed correctly when a Video or S-Video source...


. Installat  on and Connect  ons
LAMPSTA TUSPOWER
SOURCEAUTOADJ.SELECTON/STAND BYFOCUSVIDEO INCOMPUTER IN
PC CONTROLAUDIO INS-VIDEO INON/STAND BY
FOCUS
LAMP
STATUS
POWER
Connect  ng the Suppl  ed Power Cable
Connect	 the 	 supplied 	 power 	 cable 	 to 	 the 	 projector.
First 	 connect 	 the 	 supplied 	 power 	 cable's 	 three-pin 	 plug 	 to 	 the 	 AC 	 IN 	 of 	 the 	 projector, 	 and 	 then 	 connect 	 the 	 other 	
plug 	 of 	 the 	 supplied 	 power 	 cable...


AUTOADJ.
ON/STAND BY
FOCUS
LAMPSTATUSPOWERSELECT
3. Projecting an Image (Basic Operation)
This	 section 	 describes 	 how 	 to 	 turn 	 on 	 the 	 projector 	 and 	 to 	 project 	 a 	 picture 	 onto 	 the 	 screen.
➊ Turning on the Projector
NOTE: Before turning on the projector, first connect the supplied power cable's three-pin plug to the AC IN of the projector, and 
then connect the other plug of the supplied power cable in the wall outlet. Make sure that the projector is in its...

7
3. Project  ng an Image (Bas  c Operat  on)
SOURCEAUTOADJ.
ON/STAND BY
FOCUS
LAMPSTATUSPOWERSELECT
SOURCEAUTOADJ.
ON/STAND BY
FOCUS
LAMPSTATUSPOWERSELECT
EXIT
MENU
UPPAGE
OFFPOWERON
DOWN
ENTER
MAGNIFYAV-MUTE
Note on Startup screen (Menu Language Select screen)
When	 you 	 first 	 turn 	 on 	 the 	 projector, 	 you 	 will 	 get 	 the 	 Startup 	 menu. 	 The 	 menu 	 gives 	 you 	 the 	 opportunity 	 to 	 select 	
the 	 menu 	 in 	 one 	 of 	 the 	 21 	 languages.
To select a menu...

8
3. Project  ng an Image (Bas  c Operat  on)
SELECTSOURCEAUTOADJ.
ON/STAND BY
FOCUS
LAMPSTATUSPOWER
➋ Selecting a Source
Select ng the computer or v  deo source
VOLUMEASPECTHELP
FOCUSL-MOUSE-R
FREEZEPICTURE
LAMP MODE
VIDEOAUTO ADJ.COMPUTER
S-VIDEOVIEWER
NOTE: Turn on the computer or video source equipment connected to the projector.
Adjust ng w  th buttons on the cab  net
1.  Press the  sele C t  ▶ ( s OU r C e ) button with no menus displayed.
 
The Source...

9
3. Project  ng an Image (Bas  c Operat  on)
Select

ng Default Source
You 	 can 	 set 	 a 	 source 	 as 	 the 	 default 	 source 	 so 	 that 	 the 	 default 	 source 	 will 	 be 	 displayed 	 each 	 time 	 the 	 projector 	 is 	
turned 	 on.
1.  Press the M en U button.
  The menu will be displayed.
2.
  Press  the  sele C t  
▶  button  twice  to  select  [ set UP] 
and  press  the 
sele C t  
▼  button  or  the  enter   button 
to select [
general
].
3.
 
Press the 
sele
C...

0
3. Project  ng an Image (Bas  c Operat  on)
Manual Operat

on
Place 	 your 	 projector 	 on 	 a 	 flat 	 level 	 surface 	 and 	 ensure 	 that 	 the 	
projector 	 is 	 square 	 to 	 the 	 screen.
[Adjust
	 the 	 Tilt 	 Foot]
Lift
	 the 	 front 	 edge 	 of 	 the 	 projector 	 to 	 center 	 the 	 image 	 verti
-
cally.
	
(
→ 	 page 	21)
[Zoom]
Use
	 the 	 ZOOM 	 lever 	 to 	 adjust 	 the 	 image 	 size 	 on 	 the 	 screen.
➌ Adjusting the Picture Size and Position
Automat c...


3. Project ng an Image (Bas  c Operat  on)
LAMPSTATUSPOWERON/STAND BYSOURCEAUTOADJ.SELECTFOCUS
2
1
LAMPST ATUSPOWERSOURCEAUTOADJ.SELECTON/STAND BYFOCUSVIDEO INCOMPUTER IN
PC CONTROLAUDIO INS-VIDEO IN
Adjust the T  lt Foot
1.  l ift the front edge of the projector.
CAUTION:
Do
	
not 	 try 	 to 	 touch 	 the 	 ventilation 	 outlet 	 during 	 Tilt 	 Foot 	 adjust
-
ment
	
as
	
it
	
can
	
become
	
heated
	
while
	
the
	
projector
	
is
	
turned
	
on
	
and 	
during
	
its
	
cool...