NEC Np52 Projector User Manual


. Us  ng On-Screen Menu
➍ Menu Descriptions & Functions [SOURCE]
　
COMPUTER
Selects 	 the 	 computer 	 connected 	 to 	 your 	 COMPUTER 	 input 	 connector.
NOTE:
•
  When the component input signal is connected to the COMPUTER IN connector, select [COMPUTER].
•
  The projector will determine if the input signal is RGB or component signal.
VIDEO
Selects 	 what 	 is 	 connected 	 to 	 your 	 VIDEO 	 input-VCR, 	 DVD 	 player 	 or 	 document 	 camera.
S-VIDEO
Selects	 what 	 is...

3
 . Us  ng On-Screen Menu
➎ Menu Descriptions & Functions [ADJUST]
[BASIC]
[PRESET]
This	 function 	 allows 	 you 	 to 	 select 	 optimized 	 settings 	 for 	 your 	 projected 	 image.
You 	 can 	 adjust 	 neutral 	 tint 	 for 	 yellow, 	 cyan 	 or 	 magenta. 	
There
	 are 	 six 	 factory 	 presets 	 optimized 	 for 	 various 	 types 	 of 	 images. 	 You 	 can 	 also 	 use 	 [DETAIL 	 SETTINGS] 	 to 	 set 	
user
	 adjustable 	 settings 	 to 	 customize 	 each 	 gamma 	 or 	 color.
Your...


. Us  ng On-Screen Menu
[DETAIL SETTINGS]
Stor ng Your Custom  zed Sett  ngs [REFERENCE]
This	 function 	 allows 	 you 	 to 	 store 	 your 	 customized 	 settings 	 in 	 [PRESET 	 1] 	 to 	 [PRESET 	 6].
First, 	 select 	 a 	 base 	 preset 	 mode 	 from 	 [REFERENCE] 	 , 	 then 	 set 	 [GAMMA 	 CORRECTION], 	 [COLOR 	 TEMPERA
-
TURE],
	
and
	
[BrilliantColor].
HIGH-BRIGHT   .......Recommended for use in a brightly lit room.
PRESENTATION   ....Recommended for making a...


. Us  ng On-Screen Menu
[CONTRAST]
Adjusts 	 the 	 intensity 	 of 	 the 	 image 	 according 	 to 	 the 	 incoming 	 signal.
[BRIGHTNESS]
Adjusts	 the 	 brightness 	 level 	 or 	 the 	 back 	 raster 	 intensity.
[SHARPNESS]
Controls	 the 	 detail 	 of 	 the 	 image 	 for 	 Video.
[COLOR]
Increases	 or 	 decreases 	 the 	 color 	 saturation 	 level.
[HUE]
Varies	 the 	 color 	 level 	 from 	 +/- 	 green 	 to 	 +/-blue. 	 The 	 red 	 level 	 is 	 used 	 as 	 reference.
Input...


. Us  ng On-Screen Menu
[IMAGE OPTIONS]
Adjust  ng Clock and Phase [CLOCK/PHASE]
This	 allows 	 you 	 to 	 manually 	 adjust 	 CLOCK 	 and 	 PHASE.
CLOCK  ...................Use  this  item  to  fine  tune  the  computer  image  or  to  remove  any  ver tical  banding  that  might  appear. 
This function adjusts the clock frequencies that eliminate the horizontal banding in the image.
This adjustment may be necessar y when you connect your computer for the first time.
PHASE...

7
 . Us  ng On-Screen Menu
Adjust

ng Hor

zontal/Vert

cal Pos

t

on [HORIZONTAL/VERTICAL]
Adjusts 	 the 	 image 	 location 	 horizontally 	 and 	 vertically.
-	 An	 image 	 can 	 be 	 distorted 	 during 	 the 	 adjustment 	 of 	 [CLOCK] 	 and 	 [PHASE]. 	 This 	 is 	 not 	 malfunction.
-	 The 	 adjustments 	 for 	 [CLOCK], 	 [PHASE], 	 [HORIZONTAL], 	 and 	 [VERTICAL] 	 will 	 be 	 stored 	 in 	 memory 	 for 	 the 	
current 	 signal. 	 The 	 next 	 time 	 you...

8
 . Us  ng On-Screen Menu
Select  ng Aspect Rat  o [ASPECT RATIO]
Aspect	 Ratio 	 allows 	 you 	 to 	 select 	 the 	 best 	 Aspect 	 mode 	 to 	 display 	 your 	 source 	 image.
You 	 can 	 also 	 display 	 the 	 Aspect 	 Ratio 	 window 	 by 	 pressing 	 the 	 ASPECT 	 button 	 on 	 the 	 remote 	 control. 	 (
→	 page 	7)
NORMAL Standard 	 4:3 	 aspect
WIDE ZOOMThe 	 16:9 	 image 	 is 	 stretched 	 left 	 and 	 right 	 to 	 fit 	 4:3 	 screen. 	 Some 	 left 	 and 	 right...

9
 . Us  ng On-Screen Menu
Adjust  ng the Vert  cal Pos  t  on of Image [CINEMA POSITION]
(only	 when 	 [CINEMA] 	 is 	 selected 	 for 	 [ASPECT 	 RATIO])
This 	 feature 	 adjusts 	 the 	 vertical 	 position 	 of 	 the 	 image 	 when 	 viewing 	 video 	 with 	 Cinema 	 aspect 	 ratio 	 selected.
When
	 [CINEMA] 	 is 	 selected 	 in 	 [ASPECT 	 RATIO], 	 the 	 image 	 is 	 displayed 	 with 	 black 	 borders 	 on 	 the 	 top 	 and 	 bottom.
You
	 can 	 adjust 	 the...

0
. Us  ng On-Screen Menu
➏ Menu Descriptions & Functions [SETUP]
[GENERAL]
Enabl  ng Auto Keystone [AUTO KEYSTONE]
This	 feature 	 allows 	 the 	 projector 	 to 	 detect 	 its 	 tilt 	 and 	 correct 	 vertical 	 distortion 	 automatically.
To 	 turn 	 on 	 the 	 AUTO 	 KEYSTONE 	 feature, 	 select 	 [ON]. 	 To 	 adjust 	 the 	 KEYSTONE 	 feature 	 manually, 	 select 	 [OFF].
Correct ng Vert  cal Keystone D  stort  on Manually [KEYSTONE]
You	 can 	 correct...


. Us  ng On-Screen Menu
Us ng the Wall Color Correct  on [WALL COLOR]
	
This	 function 	 allows 	 for 	 quick 	 adaptive 	 color 	 correction 	 in 	 applications 	 where 	 the 	 screen 	 material 	 is 	 not 	 white.
Sett ng Lamp Mode to Normal or Eco [LAMP MODE]
This	 feature 	 enables 	 you 	 to 	 select 	 two 	 brightness 	 modes 	 of 	 the 	 lamp: 	 NORMAL 	 and 	 ECO 	 modes. 	 The 	 lamp 	 life 	
can 	 be 	 extended 	 by 	 using 	 the 	 ECO 	 mode. 	 Selecting...