NEC Np52 Projector User Manual

							
3
 . Conven  ent Features
To d sable the SECURITY funct  on:
1.   Press the M en U button.
  The menu will be displayed.
2. 
 s elect [ set UP] 
→ [ installati O n ] → [ se CU rit Y] and press the  enter  button.
 The OFF/ON menu will be displayed.
3.   s elect [O ff ] and press the  enter  button.
 The KEYWORD CONFIRMATION screen will be displayed.
4.  t ype in your keyword and press the  enter  button.  
 
When the correct keyword is entered, the SECURITY function will be disabled.
NOTE: If you forget your keyword, contact your dealer. Your dealer will provide you with your keyword in exchange for your re-
quest  code.  Your  request  code  is  displayed  in  the  Keyword  Confirmation  screen.  In  this  example  [K992-45L8-JNGJ-4XU9-
1YAT-EEA2] is a request code. 
						

							
33
. Conven  ent Features
30°
30°
➏ Using the Optional Remote Mouse Receiver (NP01MR)
The	 optional 	 remote 	 mouse 	 receiver 	 enables 	 you 	 to 	 operate 	 your 	 computer’s 	 mouse 	 functions 	 from 	 the 	 remote 	
control. 	 It 	 is 	 a 	 great 	 convenience 	 for 	 clicking 	 through 	 your 	 computer-generated 	 presentations.
Connect ng the remote mouse rece  ver to your computer
If	 you 	 wish 	 to 	 use 	 the 	 remote 	 mouse 	 function, 	 connect 	 the 	 mouse 	 receiver 	 and 	 computer.
The 	 mouse 	 receiver 	 can 	 be 	 connected 	 directly 	 to 	 the 	 computer’s 	 USB 	 port 	 (type 	 A).
NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or change 
your computer settings.
Remote mouse receiver
Computer
To USB port of PC or Macintosh
When operat ng a computer v  a the remote mouse rece  ver
Remote sensor on the remote mouse receiver
7m/22 feet
When connect ng us  ng the USB term  nal
For	 PC, 	 the 	 mouse 	 receiver 	 can 	 only 	 be 	 used 	 with 	 a 	 Windows 	 98/Me/XP*, 	 Windows 	 2000, 	 Windows 	 Vista, 	 or 		
Mac
	
OS
	
X
	
10.0.0
	
or
	
later
	
operating
	
system.
* NOTE: In SP1 or older version of Windows XP, if the mouse cursor will not move correctly, do the following:
Clear the Enhance pointer precision check box underneath the mouse speed slider in the Mouse Properties dialog box [Pointer 
Options tab].
•
  The PAGE UP and DOWN buttons do not work with PowerPoint for Macintosh.
NOTE: Wait at least 5 seconds after disconnecting the mouse receiver before reconnecting it and vice versa. The computer may 
not identify the mouse receiver if it is repeatedly connected and disconnected in rapid intervals. 
						

							
3
 . Conven  ent Features
About Drag Mode
By	 pressing 	 the 	 MOUSE-L 	 or 	 MOUSE-R 	 button 	 for 	 2 	 or 	 3 	 seconds 	 then 	 releasing, 	 the 	 drag 	 mode 	 is 	 set 	 and 	 the 	
drag
	 operation 	 can 	 be 	 performed 	 simply 	 by 	 pressing 	 the 	 SELECT 	
▼▲◀▶	 button. 	 To 	 drop 	 the 	 item, 	 press 	 the 	
MOUSE-L
	
(or
	
MOUSE-R)
	
button.
	
To
	
cancel
	
it,
	
press
	
the
	
MOUSE-R
	
(or 	 MOUSE-L) 	 button.
TIP: You can change the Pointer speed on the Mouse Properties dialog box on the Windows. For more information, see the user 
documentation or online help supplied with your computer.
Operat ng your computer’s mouse from the remote control
You	 can 	 operate 	 your 	 computer's 	 mouse 	 from 	 the 	 remote 	 control.
PAGE UP/DOWN Button  .....scrolls  the  viewing  area  of  the  window  or  to  move  to  the  previous  or  nex t  slide  in  PowerPoint 
on your computer.
SELECT ▲▼◀▶ Buttons  ....moves the mouse cursor on your computer.
MOUSE-L Button   ...............works as the mouse left button.
MOUSE-R Button  ...............works as the mouse right button.
NOTE:
•
  When you operate the computer using the SELECT 
▲▼◀ or ▶ button with the menu displayed, both the menu and the mouse 
pointer will be affected. Close the menu and perform the mouse operation.
•
 
The PAGE UP and DOWN buttons do not work with PowerPoint for Macintosh. 
						

							
3
5. Using the Viewer (NP62/NP52)
❶ What you can do with the Viewer
The 	 NP62 	 and 	 NP52 	 have 	 the 	 Viewer. 	
The
	 Viewer 	 has 	 the 	 following 	 features.
•	 When
	 a 	 commercially 	 available 	 USB 	 memory 	 that 	 stores 	 image 	 files 	 is 	 inserted 	 into 	 the 	 USB 	 port 	 (Type 	 A) 	 of 	
the 	 projector, 	 the 	 Viewer 	 allows 	 you 	 to 	 view 	 the 	 image 	 files 	 on 	 the 	 USB 	 memory.
	 Even
	 if 	 no 	 computer 	 is 	 available, 	 presentations 	 can 	 be 	 conducted 	 simply 	 with 	 the 	 projector. 	
•	 Image 	 formats 	 such 	 as 	 GIF, 	 JPEG, 	 PNG, 	 and 	 BMP 	 can 	 be 	 projected.
•	 The
	 Viewer 	 displays 	 the 	 thumbnail 	 screen 	 on 	 which 	 you 	 can 	 jump 	 to 	 any 	 specific 	 image 	 you 	 wish 	 to 	 project.
•	 There
	 are 	 two 	 ways 	 of 	 playback 	 for 	 slideshow: 	 manual 	 playback 	 and 	 auto 	 playback. 	 The 	 interval 	 time 	 can 	 be 	
changed 	 in 	 auto 	 playback.
•	 The
	 order 	 of 	 displaying 	 images 	 can 	 be 	 set 	 by 	 name, 	 extension, 	 date 	 or 	 size. 	 Ascending 	 or 	 descending 	 order 	
can 	 be 	 selected.
•	 Images
	 can 	 be 	 rotated 	 by 	 90 	 degrees 	 during 	 playback.
•	 Connecting
	 the 	 optional 	
Bluetooth®	USB 	 adaptor 	 (NP01BA) 	 to 	 the 	 USB 	 port 	 (Type 	 A) 	 of 	 the 	 projector 	 will 	 allow 	
you
	
to
	
transmit
	
images
	
wirelessly
	
from 	 your 	 computers 	 or 	 mobile 	 phones 	 with 	
Bluetooth	 wireless 	 technology 	 to 	
the
	
projector.
	 Operation
	
of
	
the
	
optional
	
Bluetooth® 	 USB 	 adaptor 	 (NP01BA) 	 is 	 subjected 	 to 	 the 	 regulations 	 of 	 the 	 countries 	
listed
	
below,
	
and
	
may
	
be
	
prohibited 	 to 	 use 	 outside 	 the 	 country 	 where 	 you 	 purchased.
Supported
	
countries
	
and 	 areas:
Japan
USA
Canada
Europe:	 Austria 	 / 	 Belgium 	 / 	 Bulgaria 	 / 	 Cyprus 	 / 	 Czech 	 / 	 Denmark 	 / 	 Estonia 	 / 	 Finland 	 / 	 France 	 / 	 Germany 	
/ 	 Greece 	 / 	 Hungary 	 / 	 Iceland 	 / 	 Ireland 	 / 	 Italy 	 / 	 Latvia 	 / 	 Liechtenstein 	 / 	 Lithuania 	 / 	 Luxembourg 	 / 	
Malta 	 / 	 Norway 	 / 	 Poland 	 / 	 Portugal 	 / 	 Romania 	 / 	 Slovak 	 / 	 Slovenia 	 / 	 Spain 	 / 	 Sweden 	 / 	 Switzer
-
land
	
/
	
The
	
Netherlands
	
/
	
United
	
Kingdom
1234567890#
USB 	 memoryBluetooth® 	 USB 	 adaptor 
						

							
3
. Us  ng the V  ewer (NP  /NP  )
NOTE
•
  The NP61 and NP41 do not have the Viewer.
•
  The  USB  port  of  the  NP62  and  the  NP52  does  not  support  USB  hub.  Both  a  USB  memory  and  the  Bluetooth
®  USB  adaptor 
cannot be used at the same time.
•
 
The  following  operations  by  using  the  buttons  on  the  projector  are  not  possible  when  the  VIEWER  screen  such  as  the  slide 
screen and the thumbnail screen is displayed.
-   Keystone correction by using the SELECT 
▲/▼ button
-
 
Auto Adjustment by using the SELECT 
◀ or AUTO ADJ button
-
 
Source selection by using the SELECT 
▶ (SOURCE) button
 
To  perform  Keystone  correction  or  Source  selection  during  display  of  the  Viewer,  press  the  MENU  button  twice  to  display 
the menu and operate Viewer from the menu.
•
 
Freezing picture by using the FREEZE button on the remote control is not possible when the VIEWER screen such as the slide 
screen and the thumbnail screen is displayed.
•
 
Executing  [RESET] 
→  [ALL  DATA]  from  the  menu  will  return  the  settings  for  the  Viewer  [OPTIONS]  menu  to  the  factory  de-
fault.
•
 
USB memory
-
  Be sure to use a USB memory device formatted with the FAT32, FAT16 or FAT12 file system.
 
The projector does not support NTFS formatted USB memory.
 
If the projector does not recognize your USB memory, check if the format is supported.
 
To format your USB memory in your computer, refer to the document or help file that comes with your Windows.
-
  We do not warrant that the USB port of the projector will support all USB memories in the market.
•
 
Supported images
-
  Supported file format for Viewer are as follows.
 
We do not warrant all the images are supported for Viewer.
 
Images other than mentioned in the table may not be supported.
Image 	 typeExtensionRestrictions
GIFGIF Interlaced 	 GIF, 	 transparent 	 GIF, 	 and 	 animated 	 GIF 	 are 	 not 	supported.
JPEGJPG/JPE/JPEGCMYK 	 JPEG 	 and 	 progressive 	 JPEG 	 are 	 not 	 supported.
PNGPNGInterlaced 	 PNG 	 and 	 alpha 	 channel 	 PNG 	 are 	 not 	 supported.
Windows
	
Bitmap
BMP-
-   Images with up to 4000 x 4000 pixels can be supported.
•
 
More than 300 files in a single folder cannot be displayed with the Viewer.
•
 
If  a  single  folder  contains  too  many  files,  switching  images  will  take  time.  To  shorten  switching  time,  reduce  the  number  of 
images contained in a single folder. 
						

							
37
. Us  ng the V  ewer (NP  /NP  )
❷ Projecting images stored in a USB memory device (Basic operation)
This	 section 	 explains 	 the 	 basic 	 operation 	 of 	 the 	 Viewer. 		
The
	 explanation 	 provides 	 the 	 operational 	 procedure 	 when 	 the 	 Viewer 	 [OPTIONS] 	 menu 	 (
→	 page 	41)	 is 	 set 	 to 	 the 	
factory
	
default.
-
	
Starting
	
the
	
Viewer
	
......................................................................
below
-
	
Removing
	
the
	
USB
	
memory
	
from
	
the
	
projector
	
...................... page
	
38
-	 Exiting 	 the 	 Viewer 	 .................................................................... page 	39
Preparation:	 Before 	 starting 	 the 	 Viewer, 	 store 	 images 	 to 	 the 	 USB 	 memory 	 using 	 your 	 computer.
LAMPSTATUSPOWER
SOURCE
AUTOADJ.SELECTON/STAND BYFOCUSVIDEO IN
COMPUTER IN
PC CO NTROLAUDIO INS-VIDEO IN
USB
Start ng the V  ewer
1.  t urn on the projector. (→ page 16)
2.
  i
nsert the U
s
B memory into the U s B port of the pro
-
jector.
-
 
To  remove  the  USB  memory  from  the  projector,  select 
"REMOVE  USB  DEVICE"  from  the  OPTIONS  menu.  (→ 
Step 5 on page 39)
3.
 
Press the 
sele
C
t  
▶  ( s OU r C e ) button.
 
The SOURCE list will be displayed.
•
 
Another  way  to  display  the  SOURCE  list  is  to  press  the 
VIEWER button on the remote control. Go on to Step [5].
4.
 
Press  the  sele C t  
▶  ( s OU r C e )  three  times  to  select 
the cursor to [V
ie
W er ].
 
Each  time  the  SELECT 
▶  button  is  pressed  quickly,  the 
next source will be highlighted.
•
 
During  this  time,  do  not  press  and  hold  the  SELECT 
▶ 
button  for  2  seconds  or  longer.  Doing  so  will  start  the 
projector to detect the signal automatically.
 
Highlighting [VIEWER] for a while will start the Viewer to 
project images stored in the USB memory (slide screen).
VOLUMEASPECTHELP
FOCUSL-MOUSE-R
FREEZEPICTURE
LAMP MODEVIDEOAUTO ADJ.COMPUTERS-VIDEOVIEWER 
						

							
38
. Us  ng the V  ewer (NP  /NP  )
5.  Press the  sele C t  ▶ button.
 
The next image will be displayed.
6.
 
Press the 
sele
C
t
 
◀ button.
 
The previous image will be displayed.
7.
 
Press the M
en
U button.
 
The control bar will be displayed.
•
 
Pressing the MENU button during display of the control 
bar  will  display  the  SOURCE  SEL ECT  screen.  Press 
the  MENU  button  again  to  close  the  SOURCE  SELECT 
screen.
•
 
Pressing  the  EXIT  button  during  display  of  the  control 
bar will close the control bar.
8.
 
Press the  sele C t  
▶ button to select [  ] and press 
the 
enter
 button. 
t
he selected image will be rotated 
90 degrees clockwise.
•
 
From this state, each time the ENTER button is pressed, 
the image will be rotated by 90 degrees clockwise.
9.
 
Press the  sele C t  
▶ button to select [  ] and press 
the 
enter
 button.
 
The control bar will be closed.
10. Press the 
e
X
it
 button.
  t
he thumbnail screen will be displayed.
•
 
Another  way  to  display  the  thumbnail  screen  is  to  go 
back  to  Step  7  and  select  [   ]  of  the  control  bar  and 
press the ENTER button.
•
 
To  return  the  slide  screen  from  the  thumbnail  screen, 
select  the  image  you  wish  to  display  in  slide  and  press 
the ENTER button.
Remov  ng the USB memory from the projector
1.	Press  the  M en U  button  with  the  thumbnail  screen 
displayed.
 
The pop-up menu will be displayed at the bottom left of 
the screen.
•
 
Pressing the MENU button during display of the pop-up 
menu will display the on-screen menu. Press the MENU 
button again to close the on-screen menu.
2.
  s elect  [ re MOV e   U s B  de V i C e ]  and  press  the  enter  
button.
•
 
The  confirmation  message  will  be  displayed  at  the  cen
-
ter. 
						

							
39
. Us  ng the V  ewer (NP  /NP  )
3.  Press  the  sele C t  ◀  to  select  [OK]  and  press 
the 
enter
 button.
 
The  confirmation  message  will  be  displayed  at  the 
center of the screen.
4.
 
Press the  enter  button.
 
The confirmation message will be changed.
5.
  r emove the U s B memory from the projector.
NOTE:  If  you  remove  the  USB  memory  from  the  projector 
without  using  [REMOVE  USB  DEVICE]  from  the  menu,  the 
projector may not operate correctly. If this happens, turn off 
the  projector  and  unplug  the  power  cable.  Wait  3  minutes, 
then connect the power cable, and turn on the projector.
Ex t  ng the V  ewer
1.  Press  the  M en U  button  with  the  slide  screen  or 
the thumbnail screen displayed.
 
The  control  bar  or  the  pop-up  menu  will  be  dis
-
played.
2.
 
 Press the M en U button again.
 
The on-screen menu will be displayed.
3.
  s elect  a  source  other  than  [V ie W er ]  and  press 
the 
enter  button.
 
The Viewer will be exited.
TIP:  To  exit  the  Viewer  using  the  remote  control,  select  a 
source other than [VIEWER].
LAMPSTATUSPOWER
SOURCE
AUTOADJ.SELECTON/STAND B YFOCUSVIDEO IN
COMPUTER IN
PC  CONTR OLAUDIO INS-VIDEO IN
USB
VOLUMEASPECTHELP
FOCUSL-MOUSE-R
FREEZEPICTURE
LAMP MODEVIDEOAUTO ADJ.COMPUTERS-VIDEOVIEWER 
						

							
0
. Us  ng the V  ewer (NP  /NP  )
❸ Operating the slide screen
The	 slide 	 screen 	 allows 	 you 	 to 	 perform 	 the 	 following 	 operations.
SELECT ▶ button...............Displays the nex t image.
SELECT ◀ button...............Displays the previous image.
ENTER button  ....................Displays  the  pointer  (   ).  The  pointer  can  be  moved  by  using  the  SELECT ▲▼◀▶  button. 
Press the ENTER button again to close the pointer.
EXIT button  ........................Switches to the thumbnail screen.
MENU button   .....................Displays the control bar.
Use  the  SELECT ◀  or ▶  button  to  move  the  yellow  cursor  to  the  item  and  press  the  ENTER 
button. Each function is shown below.
①②③④⑤⑥⑦
Button	 Name 	Description
①	Back Displays 	 the 	 previous 	 image.
②	Play/PauseStarts 	 or 	 stops 	 auto 	 playback 	 of 	 slideshow. 	 Or 	 starts 	 or 	 stops 	 slide-show.
③	Forward
Displays 	 the 	 next 	 image.
④	90° 	 clockwise
Rotates 	 the 	 image 	 90 	 degrees 	 clockwise.
⑤	90° 	 counterclockwise
Rotates 	 the 	 image 	 90 	 degrees 	 counter 	 clockwise.
⑥	Exit
Closes 	 the 	 control 	 bar.
⑦	ReturnSwitches 	 to 	 the 	 thumbnail 	 screen.
❹ Operating the thumbnail screen
Parts of thumbna l screen
①
②
④
⑤
③ 
						

							

. Us  ng the V  ewer (NP  /NP  )
Name	Description
①	Path 	 Displays 	 the 	 path 	 of 	 the 	 displayed 	 image. 	 When 	 a 	 USB 	 memory 	 is 	
inserted, 	 the 	 drive 	 name 	 is 	 displayed 	 as 	 [USB]. 	 When 	 the 	Bluetooth	
USB
	
adaptor
	
is
	
inserted,
	
the
	
drive
	
name
	
is
	
displayed
	
as
	
[Bluetooth].
②	 Up 	 directory
Returns 	 to 	 the 	 upper 	 (parent) 	 folder.
③	Images 	 or 	 folder 	 (in 	
thumbnail 	 or 	 icon 	 form)Displays
	 the 	 image 	 in 	 the 	 thumbnail 	 (reduced 	 display) 	 or 	 icon 	 form.
④	File 	 name 	 of 	 selected 	image Displays 	 the 	 file 	 name 	 of 	 the 	 image 	 you 	 move 	 the 	 cursor 	 to.
⑤	Information•	 When 	 the 	 image 	 is 	 highlighted:
	 Displays 	 the 	 given 	 number 	 in 	 the 	 order 	 of 	 display, 	 the 	 last 	 date 	
and 	 time 	 of 	 the 	 image 	 changing, 	 and 	 the 	 file 	 size. 	 The 	 date 	 and 	
time 	 of 	 the 	 image 	 received 	 using 	 the 	Bluetooth
	 wireless 	 technol-
ogy
	
will
	
not
	
be
	
shown.
•	 When
	
the
	
folder
	
is
	
highlighted:
	 Displays
	
the
	
last
	
date
	
and
	
time
	
of
	
the
	
folder.
•	 When
	
the
	
drive
	
is
	
highlighted:
	 Displays
	
the
	
free
	
space
	
of
	
the
	
drive.
Operat  ng the thumbna  l screen
SELECT ▲▼◀▶ buttons  ....Moves the cursor.
ENTER button   ....................Switches to the slide screen when the image is highlighted.
The files in a folder are displayed when the folder is highlighted.
It returns to the upper (parent) folder when the "Up director y" is highlighted.
EXIT button  ........................Returns to the upper (parent) folder.
MENU button   .....................Displays the following pop-up menu.
Menu	 item 	Description
PLAY Selects 	 to 	 start 	 slideshow. 	
DELETE(Note)Deletes	 the 	 images 	 received 	 with 	Bluetooth	 wireless 	 technology. 	
The
	
submenu
	
of
	
[DELETE]
	
or
	
[DELETE 	 ALL 	 FILES] 	 is 	 displayed.
REMOVE
	
USB
	
DEVICE Stops
	
the
	
USB
	
memor y
	
inser ted
	
into 	 the 	 projector. 	 Execute 	 this 	
menu
	
item
	
before
	
removing
	
the
	
USB 	 memory 	 from 	 the 	 projector.
OPTIONS Displays 	 [OPTIONS] 	 menu. 	 (→	 this 	 page) 	
Note:  This  option  will  be  displayed  when  the  optional  Bluetooth®  USB  adaptor  (NP01BA)  is  in-
serted into the projector. (→ page 45)
[OPTIONS] menu
Factory	 settings 	 are 	 indicated 	 in 	 square 	 bracket 	 [ 				 ].
Menu	 itemDescription
VIEWER PLAY 	 MODE
[MANUAL]AUTO
Selects 	 auto 	 play 	 or 	 manual 	 play 	 (button 	 op-
eration)
	
of
	
slideshow.
INTERVAL [5 	 SECONDS] 	 -
300 	 SECONDSSpecifies
	 inter val 	 time 	 when 	 [AUTO] 	 is 	 se-
lected
	
for
	
PLAY
	
MODE.
START[SLIDE]THUMBNAILS S e l e c t s 	 t he 	 s li d e 	 s c ree n 	 or 	 t he 	 t hum b nail 	
screen 	 when 	 the 	 Viewer 	 starts
REPEATOFF[ON]Tu r n s 	 o n 	 o r 	 o f f 	 t h e 	 r e p e a t 	 f u n c t i o n 	 w h e n 	
[AUTO] 	 i s 	 sele c te d 	 for 	 [PL AY 	 M O DE] 	 an d 	
turns 	 on 	 or 	 off 	 the 	 rotation 	 when 	 [MANUAL] 	
is 	 selected 	 for 	 [PLAY 	 MODE].
SHOW
	
THUMBNAILS
	
OFF[ON] S e l e c t s 	 [O N] 	 to 	 d i s p l ay 	 t h u m b n a i l s 	 i n 	 t h e 	
thumbnail 	 screen. 	 Selec t 	 [OFF ] 	 to 	 display 	
icons 	 representing 	 image.