NEC Np510 Portable Projector User Manual
Have a look at the manual NEC Np510 Portable Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
62 5. Using On-Screen Menu [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 6]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERA- TURE]. HIGH-BRIGHT ........Recommended for use in a brightly lit room. PRESENTATION .....Recommended for making a presentation using a PowerPoint file. VIDEO ....................Recommended for typical TV program viewing. MOVIE ...................Recommended for movies. GRAPHIC ...............Recommended for graphics. sRGB .....................Standard color values. Selecting Gamma Correction Mode [GAMMA CORRECTION] Each mode is recommended for: DYNAMIC ..............Creates a high-contrast picture. NATURAL ...............Natural reproduction of the picture. BLACK DETAIL .......Emphasizes detail in dark areas of the picture. Adjusting Color Temperature [COLOR TEMPERATURE] This option allows you to select the color temperature of your choice. NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available. Adjusting Brightness and Contrast [DYNAMIC CONTRAST] (NP410 and NP310) This function allows you to adjust the contrast ratio optically using the built-in iris. To increase the contrast ratio, select [ON]. Selecting Still Image Mode or Movie Mode [IMAGE MODE] This function allows you to select the still image mode or the movie mode. STILL .....................This mode is for a still image. MOVIE ...................This mode is for a movie. NOTE: This function is available only when [HIGH-BRIGHT] is selected for [REFERENCE]. Adjusting White Balance [WHITE BALANCE] This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level of the screen; Brightness for each color (RGB) is used to adjust the black level of the screen. [CONTRAST] Adjusts the intensity of the image according to the incoming signal. [BRIGHTNESS] Adjusts the brightness level or the back raster intensity. [SHARPNESS] Controls the detail of the image. [COLOR] Increases or decreases the color saturation level.
63 5. Using On-Screen Menu [HUE] Varies the color level from +/− green to +/− blue. The red level is used as reference. Input signalCONTRAST BRIGHTNESS SHARPNESS COLORHUE Computer (RGB DIGITAL)YesYesYes NoNo Computer (RGB ANALOG)YesYesYes NoNo Component YesYesYesYes* Yes* Video, S-VideoYesYesYesYesYes Yes = Adjustable, No = Not adjustable, Yes* = depending on the signal NOTE: The NP405 and NP305 do not support “Computer (RGB DIGITAL)” signal. [RESET] The settings and adjustments for [CONTRAST], [BRIGHTNESS], [SHARPNESS], [COLOR], [HUE], and [REFER- ENCE] within [PRESET] will be returned to the factory settings. The settings and adjustments under [DETAIL SETTINGS] within the [PRESET] screen that are not currently selected will not be reset.
64 5. Using On-Screen Menu [IMAGE OPTIONS] Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK ...................Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function adjusts the clock frequencies that eliminate the horizontal ban\ ding in the image. This adjustment may be necessary when you connect your computer for the first time. PHASE ...................Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.) Use [PHASE] only after the [CLOCK] is complete.
65 5. Using On-Screen Menu Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be called up and applied. To delete adjustments stored in memory, from the menu, you select [RESET] → [CURRENT SIGNAL] or [ALL DATA] and reset the adjustments. Selecting Overscan Percentage [OVERSCAN] Select overscan percentage (0%, 5% and 10%) for signal. Projected image Overscaned by 10% NOTE: • The [0[%]] cannot be selected when VIDEO and S-VIDEO signals are used. • [OVERSCAN] is not available when [NATIVE] is selected for [ASPECT RATIO].
66 5. Using On-Screen Menu Selecting Aspect Ratio [ASPECT RATIO] The term “aspect ratio” refers to the ratio of width to height of a projected image. The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio. • This table shows typical resolutions and aspect ratios that most computers support. ResolutionAspect RatioVGA 640 x 480 4:3 SVGA 800 x 600 4:3 XGA 1024 x 768 4:3 WXGA 1280 x 768 15:9 WXGA 1280 x 800 16:10 WXGA+ 1440 x 900 16:10 SXGA 1280 x 1024 5:4 SXGA+ 1400 x 1050 4:3 UXGA 1600 x 1200 4:3 OptionsFunction AUTO The projector will automatically determine the incoming signal and display it in its aspect ratio. ( → next page) The projector may erroneously determine the aspect ratio depending on its signal. If this occurs, select the appropriate aspect ratio from the following.4:3The image is displayed in 4:3 aspect ratio.16:9The image is displayed in 16:9 aspect ratio.15:9The image is displayed in 15:9 aspect ratio.16:10The image is displayed in 16:10 aspect ratio.WIDE ZOOM (NP610/NP510/NP410/ NP405/NP310/NP305/ NP610S) The image is stretched left and right. Parts of the displayed image are cropped at the left and right edges and therefore not visible. LETTERBOX (NP510W/NP410W/ NP510WS) The image of a letterbox signal is stretched equally in the horizontal and vertical directions to fit the screen. Parts of the displayed image are cropped at the top and bottom edges and therefore not visible. NATIVE The projector displays the current image in its true resolution when the incoming computer signal has a lower resolution than the projector’s native resolution. [Example 1] When the incoming signal with the resolution of 800 x 600 is displayed on the NP610/NP510/ NP410/NP405/NP310/NP305/ NP610S: [Example 2] When the incoming sig - nal with the resolution of 800 x 600 is displayed on the NP510W/NP410W/ NP510WS: NOTE: • When a non-computer signal is displayed, the [NATIVE] is not available. • When a signal with a higher resolution than the projector’s native resolution is displayed, [NATIVE] is not available.
67 5. Using On-Screen Menu Sample image when the appropriate aspect ratio is automatically determined NP610/NP510/NP410/NP405/NP310/NP305/NP610S [Computer signal] Aspect ratio of incoming signal4:35:416:9 15:916:10 Sample image when the appro- priate aspect ratio is automati - cally determined [Video signal] Aspect ratio of incoming signal4:3 Letterbox Squeeze Sample image when the as- pect ratio is automatically de - termined NOTE: To display a squeezed signal prop-erly, select [16:9] or [WIDE ZOOM]. NP510W/NP410W/NP510WS [Computer signal] Aspect ratio of incoming signal4:3 5:416:9 15:916:10 Sample image when the appro- priate aspect ratio is automati - cally determined [Video signal] Aspect ratio of incoming signal4:3 Letterbox Squeeze Sample image when the as- pect ratio is automatically de - termined NOTE: To display a letterbox signal prop-erly, select [LETTERBOX].NOTE: To display a squeezed signal prop-erly, select [16:9]. TIP: • Image position can be adjusted vertically using [POSITION] when the [16:9], [15:9], or [16:10] aspect ratios are selected. • The term “letterbox” refers to a more landscape-oriented image when compared to a 4:3 image, which is the standard aspect ratio for a vide source. The letterbox signal has aspect ratios with the vista size “1.85:1” or cinema scope size “2.35:1” for movie film. • The term “squeeze” refers to the compressed image of which aspect ratio is converted from 16:9 to 4:3. Adjusting the Vertical Position of Image [POSITION] (not available on NP510W/NP410W/ NP510WS) (only when [16:9], [15:9], or [16:10] is selected for [ASPECT RATIO]) When [16:9], [15:9], or [16:10] is selected in [ASPECT RATIO], the image is displayed with black borders on the top and bottom. You can adjust the vertical position from the top to the bottom of the black area.
68 5. Using On-Screen Menu Menu Descriptions & Functions [SETUP] [GENERAL] [NP610/NP510/NP410/NP405/NP310/NP305/NP510W/ NP410W][NP610S/NP510WS] Using Digital Zoom [DIGITAL ZOOM] (NP610S/NP510WS) This feature allows you to electronically fine adjust the image size on the screen. Use or button to large or reduce the projected image. TIP: To adjust the projected image size roughly, move the projector away or closer to the screen. (→ page 30). To fine adjust the zoom, use the [DIGITAL ZOOM] function. Enabling Auto Keystone [AUTO KEYSTONE] This feature allows the projector to detect its tilt and correct vertical distortion automatically. To turn on the AUTO KEYSTONE feature, select [ON]. To adjust the KEYSTONE feature manually, select [OFF]. Correcting Vertical Keystone Distortion Manually [KEYSTONE] You can correct vertical distortion manually. (→ page 34) TIP: When this option is highlighted, pressing the ENTER button will dis\ play its slide bar for adjustment. Saving Vertical Keystone Correction [KEYSTONE SAVE] This option enables you to save your current keystone settings. OFF ........................Does not save current keystone correction settings. It will return your keystone correction settings to “zero”. ON .........................Saves current keystone correction settings Saving your change once affects all sources. The changes are saved when the projector is turned off. NOTE: When [AUTO KEYSTONE] is set to [ON], [KEYSTONE SAVE] is not available. Next time you turn on the power, the AUTO KEYSTONE function will work and the data stored with [KEYSTONE SAVE] will be invalid.
69 5. Using On-Screen Menu Using the Wall Color Correction [WALL COLOR] This function allows for quick adaptive color correction in applications where the screen material is not white. NOTE: Selecting [WHITEBOARD] reduces lamp brightness. Setting Eco Mode [ECO MODE] This feature turns on or off the ECO mode. The lamp life can be extended by selecting [ON]. Selecting [ON] also decreases fan noise when compared to [OFF] mode. ECO MODEDescriptionStatus of LAMP indicator OFFThis is the Default setting (100% Brightness).Off ON Select this mode to increase the lamp life (approx. 70% Brightness on NP610/ NP510W/NP410W/NP610S/NP510WS and approx. 80% Brightness on NP510/ NP410/NP405/NP310/NP305). Steady Green light NOTE: • The [LAMP LIFE REMAINING] and [LAMP HOURS USED] can be checked in [USAGE TIME]. Select [INFO.] → [USAGE TIME]. (→ page 78) • The projector is always in [ON] for 90 seconds after the lamp is turned on and while the POWER indicator is blinking green. The lamp condition will not be affected even when [ECO MODE] is changed. • If there is no signal for about one minute, the projector will display a blue, black or logo background (depending on setting) and go into [ON]. The projector will return to the [OFF] mode once a signal is accepted. • If the projector becomes overheated in [OFF] mode because of use in a high-temperature room, there may be a case where the [ECO MODE] automatically changes to [ON] mode to protect the projector. This mode is called “forced ECO mode”. When the projector is in [ON] mode, the picture brightness decreases. The LAMP indicator’s steady light indicates the projector is in [ON] mode. When the projector comes back to normal temperature, the [ECO MODE] returns to [OFF] mode. Thermometer symbol [ ] indicates the [ECO MODE] is automatically set to [ON] mode because the internal temperature is too high.
70 5. Using On-Screen Menu Setting Closed Caption [CLOSED CAPTION] This option sets several closed caption modes that allow text to be superimposed on the projected image of Video or S-Video. OFF ........................This exits the closed caption mode. CAPTION 1-4 .........Text is superimposed. TEXT 1-4 ................Text is displayed. NOTE: • The closed caption is not available under the following conditions: - when messages or menus are displayed. - when an image is magnified, frozen, or muted. • Doing the following may cause portions of superimposed text or closed caption to be truncated. If this occurs, try to change correction amount or selection to place the superimposed text or closed caption within the screen. - Using the [DIGITAL ZOOM] or [KEYSTONE] function to correct the image excessively - Selecting [16:10] or [16:9] from [ASPECT RATIO] - Using the [POSITION] (not available on NP510W/NP410W/NP510WS) Selecting Menu Language [LANGUAGE] You can choose one of 21 languages for on-screen instructions. NOTE: Your setting will not be affected even when [RESET] is done from the menu. [MENU] Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME. Turning On / Off Source Display [SOURCE DISPLAY] This option turns on or off input name display such as COMPUTER 1, COMPUTER2(DIGITAL), COMPUTER 2(ANA- LOG), VIDEO, S-VIDEO and No Input to be displayed on the top right of the screen. On NP405/NP305, the input name will be displayed as COMPUTER 1, COMPUTER2, VIDEO, and S-VIDEO. Turning ON/OFF Control ID [ID DISPLAY] (Available only when the optional remote control NP02RC is used) ID DISPLAY ...........This option turns on or off the ID number which is displayed when the ID SET button on the remote control is pressed.
71 5. Using On-Screen Menu Turning On / Off Eco Message [ECO MESSAGE] This option turns on or off the following messages when the projector is turned on. The Eco Message prompts the user to save energy. When [OFF] is selected for [ECO MODE], you will get a message to prompt you to select [ON] for [ECO MODE]. When [ON] is selected for [ECO MODE] To close the message, press any one of the buttons. The message will disappear if no button operation is done for 30 seconds. When [OFF] is selected for [ECO MODE] Pressing the ENTER button will display the [ECO MODE] screen. (→ page 69) To close the message, press the EXIT button. Selecting Menu Display Time [DISPLAY TIME] This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the fac- tory preset. Selecting a Color or Logo for Background [BACKGROUND] Use this feature to display a blue/black screen or logo when no signal is available. The default background is [BLUE]. NOTE: Your setting will not be affected even when [RESET] is done from the menu. Selecting Interval Time for Filter Message [FILTER MESSAGE] This option allows you to select the time preference between displaying the message for cleaning the filters. Clean the filter when you get the message “PLEASE CLEAN FILTER.” (→ page 81) Five options are available: OFF, 100[H], 200[H], 500[H], 1000[H] The default setting is 500[H]. NOTE: Your setting will not be affected even when [RESET] is done from the menu.