Home > NEC > Projector > NEC Np510 Portable Projector User Manual

NEC Np510 Portable Projector User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Np510 Portable Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							12
    2. Installation and Connections
    [NP510W/NP410W]
    The	further	 your	projector	 is	from	 the	screen	 or	wall,	 the	larger	 the	image. 	The	 minimum	 size	the	image	 can	be	is	
    approximately	 21"	(0.53	 m)	measured	 diagonally	 when	the	projector	 is	roughly	 31	inches	 (0.8	m)	from	 the	wall	 or	
    screen. 	The	 largest	 the	image	 can	be	is	300"	 (7.6	m)	when	 the	projector	 is	about	 431	inches	 (11.0	m)	from	 the	wall	
    or screen.
    300
    240
    Distance 
    (Unit: m/inch)
    Lens center Screen Size
    Screen Size (Unit: cm/inch)
    200
    180
    150
    120
    100
    80
    11.0/4318.8/345
    6.6/258
    5.5/215
    4.4/172
    3.6/1432.9/1142.2/851.4/56
    40
    7.3/287
    60
    3021
    0.9/
    420.8/31
    646.2(W)�403.9(H) / 254(W)�159(H)
    516.9(W)�323.1(H) / 204(W)�127(H)
    430.8(W)�269.2(H) / 170(W)�106(H)
    323.1(W)�201.9(H) / 127(W)�79(H)
    387.7(W)�242.3(H) / 153(W)�95(H)
    258.5(W)�161.5(H) / 102(W)�64(H)
    215.4(W)�134.6(H) / 85(W)�53(H)
    172.3(W)�107.7(H) / 68(W)�42(H)
    129.2(W)�80.8(H) / 51(W)�32(H)
    86.2(W)�53.8(H) / 34(W)�21(H)
    64.6(W)�40.4(H) / 25(W)�16(H)
    45.2(W)�28.3(H) / 18(W)�11(H)
    TIP:
    •	 The	distances	are	indicated	by	intermediate	values	between	tele	and	wide.	Use	as	a	rule	of	thumb.
    •	 The	Zoom	lever	adjusts	the	image	size	by	up	to	+/−10%.
    •	 For	more	details	on	throw	distance,	see	page	15. 
    						
    							13
    2. Installation and Connections
    [NP610S]
    The	further	 your	projector	 is	from	 the	screen	 or	wall,	 the	larger	 the	image. 	The	 minimum	 size	the	image	 can	be	is	ap-
    proximately	 60"	(1.52	 m)	measured	 diagonally	 when	the	projector	 is	roughly	 35	inches	 (0.9	m)	from	 the	wall	 or	screen. 	
    The	largest	the	image	can	be	is	110"	(2.8	m)	when	the	projector	is	about	66	inches	(1.7	m)	from	the	wall	or	screen.
    110
    Distance 
    (Unit: m/inch)
    Lens center Screen Size
    Screen Size (Unit: cm/inch)
    223.5(W)�167.6(H)/88(W)�66(H) 
    203.2(W)�152.4(H)/80(W)�60(H)
    182.9(W)�137.2(H)/72(W)�54(H)
    162.6(W)�121.9(H)/64(W)�48(H)
    156.5(W)�117.3(H)/62(W)�46(H)
    142.2(W)�106.7(H)/56(W)�42(H)
    130.0(W)�97.5(H)/51(W)�38(H)
    121.9(W)�91.4(H)/48(W)�36(H)
    100
    90
    80
    77
    70
    1.67/661.51/591.36/531.20/471.16/461.05/410.96/380.90 /35
    60
    64
    TIP:
    •	 Digital	Zoom	can	result	in	a	blurry	image	due	to	the	electronic	zoom.
    •	 The	Digital	Zoom	function	adjusts	the	image	size	by	up	to	−20%.	(→ page 32)
    •	 For	more	details	on	throw	distance,	see	page	16.
      
    						
    							14
    2. Installation and Connections
    [NP510WS]
    The	further	 your	projector	 is	from	 the	screen	 or	wall,	 the	larger	 the	image. 	The	 minimum	 size	the	image	 can	be	is	ap-
    proximately	 57"	(1.45	 m)	measured	 diagonally	 when	the	projector	 is	roughly	 36	inches	 (0.9	m)	from	 the	wall	 or	screen. 	
    The	largest	the	image	can	be	is	104"	(2.6	m)	when	the	projector	is	about	66	inches	(1.7	m)	from	the	wall	or	screen.
    104
    Distance 
    (Unit: m/inch)
    Lens center Screen Size
    Screen Size (Unit: cm/inch)
    224.0(W)�140.0(H)/88(W)�55(H)
    215.4(W)�134.6(H)/85(W)�53(H)
    193.9(W)�121.2(H)/76(W)�48(H)
    187.4(W)�117.1(H)/74(W)�46(H)
    172.3(W)�107.7(H)/68(W)�42(H)
    150.8(W)�94.2(H)/59(W)�37(H)
    129.2(W)�80.8(H)/51(W)�32(H)
    122.8(W)�76.7(H)/48(W)�30(H)
    100
    90
    87
    80
    70
    1.67/661.60/631.44/571.39/551.28/501.11/440.95/370.90 /36
    57
    60
    TIP:
    •	 Digital	Zoom	can	result	in	a	blurry	image	due	to	the	electronic	zoom.
    •	 The	Digital	Zoom	function	adjusts	the	image	size	by	up	to	−20%.	(→ page 32)
    •	 For	more	details	on	throw	distance,	see	page	16. 
    						
    							15
    2. Installation and Connections
    C
    α B
    D
    Throw Distance and Screen Size
    The	
    following	 shows	the	proper	 relative	 positions	 of	the	 projector	 and	screen. 	Refer	 to	the	 table	 to	determine	 the	
    position of installation.
    Distance	Chart	[NP610/NP510/NP410/NP405/NP310/NP305/NP510W/NP410W]
    B	=	 Ver tical 	distance 	between 	lens 	center 	and	
    screen center
    C	=	 Throw	distance
    D	=	 Ver tical 	distance 	between 	lens 	center 	and	
    screen  bottom  (top  of  screen  for  ceiling  ap -
    plication)
    α
    	=	 Throw	angle
    NOTE:  The  values  in  the  tables  are  design  values  and 
    may vary.
    [NP610/NP510/NP410/NP405/NP310/NP305]
    Screen SizeB C
    Dα
    Diagonal WidthHeight widetele widetele
    inch mminch mminch mminch mminch mm -inch mminch mmdegree -degree
    21 533 17427 13320 4110  ---30 753  -2 -50  --8.3 
    25 635 20508 15381 5131  29 746  -36 903 -2 -60  10.0  -8.3 
    30 762 24610 18457 6157  36 903  -43 1092 -3 -71  9.9  -8.2 
    40 1016 32813 24610 8210  48 1217  -58 1469 -4 -95  9.8  -8.1 
    60 1524 481219 36914 12314  73 1845  -88 2223 -6 -143  9.7 -8.0 
    72 1829 581463 431097 15377  87 2221  -105  2675 -7 -171 
    9.6  -8.0 
    80 2032 641626 481219 17419  97 2473  -117  2977 -8 -191  9.6 -8.0 
    84 2134 671707 501280 17440  102 2598  -123  3128 -8 -200  9.6 -8.0 
    90 2286 721829 541372 19471  110 2787  -132  3354 -8 -214  9.6 -8.0 
    100 2540 802032 601524 21524  122 3101  -147  3731 -9 -238  9.6 -8.0 
    120 3048 962438 721829 25629  147 3729  -177  4485 -11 -286  9.6 -8.0 
    150 3810 1203048 902286 31786  184 4671  -221  5616 -14 -357  9.5 -8.0 
    180 4572 1443658 1082743 37943  221 5613  -266  6747 -17 -429  9.5 -8.0 
    200 5080 1604064 120
    3048 411048  246 6241  -295  7501 -19 -476  9.5 -8.0 
    210 5334 1684267 1263200 431100  258 6555  -310  7878 -20 -500  9.5 -7.9 
    240 6096 1924877 1443658 501257  295 7497  -355  9009 -23 -572  9.5 -7.9 
    270 6858 2165486 1624115 561414  332 8439  -399 10140 -25 -643  9.5 -7.9 
    300 7620 2406096 1804572 621572  369 9381  -444 11271 -28 -714  9.5 -7.9 
    [NP510W/NP410W]
    Screen SizeB C
    Dα
    Diagonal WidthHeight widetele widetele
    inch mminch mminch mminch mminch mm -inch mminch mmdegree -degree
    21 533 18452 11283 5117 ---31798 -1-25 --8.3
    25 635 21538 13337 5139 31791 -38957 -1-29 10.0 -8.3
    30 762 25646 16404 7167 38957 -461158 -1-35 9.9 -8.2
    40 1016 34862 21538 9222 511290 -611557 -2-47 9.8 -8.1
    60 1524 511292 32808 13333 771956 -932356 -3-71 9.7 -8.0
    72 1829 611551 38969 16400 932354 -112 2835 -3-85
    9.6 -8.0
    80 2032 681723 421077 17444 1032621 -124 3156 -4-94 9.6 -8.0
    84 2134 711809 451131 18466 1082754 -131 3316 -4-99 9.6 -8.0
    90 2286 761939 481212 20500 1162954 -140 3555 -4-106 9.6-8.0
    100 2540 852154 531346 22555 1293287 -156 3955 -5-118 9.6-8.0
    120 3048 1022585 641615 26666 1563953 -187 4754 -6-141 9.6-8.0
    150 3810 1273231 792019 33833 1954951 -234 5953 -7-177 9.5-8.0
    180 4572 1533877 952423 391000 2345950 -282 7152 -8-212 9.5-8.0
    200 5080 1704308 106
    2692 441111 2606615 -313 7951 -9-236 9.5-8.0
    210 5334 1784523 1112827 461166 2746948 -329 8351 -10-247 9.5-7.9
    240 6096 2045169 1273231 521333 3137947 -376 9550 -11-283 9.5-7.9
    270 6858 2295816 1433635 591499 3528945 -42310748 -13-318 9.5-7.9
    300 7620 2546462 1594039 661666 3919944 -47011947 -14-353 9.5-7.9
    Screen center
    Lens	center
    Screen bottom 
    						
    							16
    2. Installation and Connections
    [NP610S]
    Screen SizeBC
    Dα
    Diagonal WidthHeight widewide
    inch mminch mminch mminch mminch mminch mmdegree
    60 1524 481219 36914 20505 35895 24829.4
    64 1626 511300 38975 21538 38956 25129.4
    70 1778 561422 421067 23589 411049 25629.3
    77 1956 621565 461173 26648 461156 26129.3
    80 2032 641626 481219 27673 471203 36429.2
    90 2286 721829 541372 30757 531357 37129.2
    100 2540 802032 601524 33841 591511 37929.1
    110 2794 882235 661676 36926 661665 38729.1
    [NP510WS]
    Screen SizeB C
    Dα
    Diagonal WidthHeight widewide
    inch mminch mminch mminch mminch mminch mmdegree
    57 1448 481228 30767 20508  36 902  5 125  29.4 
    60 1524 511292 32808 21535  37 951  5 131  29.4 
    70 1778 591508 37942 25624  44 1114  6 153  29.3 
    80 2032 681723 421077 28713  50 1277  7 175  29.2 
    87 2210 741874 461171 31776  55 1392  7 190  29.1 
    90 2286 761939 481212 32803  57 1441  8 197  29.1 
    94 2388 802025 501265 33838  59 1506  8 206  29.1 
    104 2642 882240 551400 37928  66 1669  9 228  29.1 
    WARNING
    *	 Installing	 your	projector	 on	the	 ceiling	 must	be	done	
    by	a	qualified	 technician. 	Contact	 your	NEC	 dealer	 for	
    more information.
    *	 Do	not	attempt	to	install	the	projector	yourself.
    •	 Only	 use	your	 projector	 on	a	solid,	 level	surface. 	If	 the	
    projector falls to the ground, you can be injured and 
    the projector severely damaged.
    •	 Do 	not 	use 	the 	projector 	where 	temperatures	 vary	
    greatly. The  projector  must  be  used  at  temperatures 
    between	41°F	(5°C)	 and	104°F	 (40°C)	 (Eco	mode	 se-
    lected	automatically	at	95°F	to	104°F/35°C	to	40°C).
    •	 Do	not 	expose 	the 	projector 	to 	moisture, 	dust, 	or	
    smoke. 	This	will	harm	the	screen	image.
    •	 Ensure 	that 	you 	have 	adequate 	ventilation 	around 	your	
    projector 	so 	heat 	can 	dissipate. 	Do 	not 	cover 	the 	vents	
    on the side or the front of the projector.
    Reflecting	the	Image
    Using	 a	mirror	 to	reflect	 your	projector’s	 image	enables	
    you	to	enjoy	 a	much	 larger	 image	 when	a	smaller	 space	
    is	required. 	Contact 	your	 NEC	dealer 	if	 you	 need	 a	mirror 	
    system. 	If	 you’re	 using	a	mirror	 system	 and	your	 image	
    is	inverted,	 use	the	MENU	 and	 buttons on your 
    projector  cabinet  or  your  remote  control  to  correct  the 
    orientation. (→ page 72)
    C
    α B
    DB	=	 Ver tical 	distance 	between 	lens 	center 	and	
    screen center
    C	=	 Throw	distance
    D	=	 Ver tical 	distance 	between 	lens 	center 	and	
    screen  bottom  (top  of  screen  for  ceiling  ap -
    plication)
    α
    	=	 Throw	angle
    NOTE:  The  values  in  the  tables  are  design  values  and 
    may vary.
    Screen center
    Lens	center
    Screen bottom
    Distance	Chart	[NP610S/NP510WS] 
    						
    							17
    2. Installation and Connections
    COMPUTER 1 INCOMPUTER 2 INAUDIO IN
    PHONE 
    IBM	VGA	or	Compatibles	(Notebook	type)	or	Macintosh	(Notebook	type)
    VGA signal cable (supplied)To mini D-Sub 15-pin connector on 
    the projector. It is recommended that 
    you use a commercially available 
    distribution amplifier if connecting a 
    signal cable longer than the cable 
    supplied.
    NOTE:	For	older	Macintosh,	use	a	commercially	available	
    pin	adapter	 (not	supplied)	 to	connect	 to	your	 Mac’s	 video	
    port.
    Audio cable 
    (not supplied)
     Making Connections
    NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode 
    and before turning on the power to the notebook PC.
    In most cases the output signal from the notebook PC is not turned on un\
    less connected to the projector before being powered up.
    *	 If	the	screen	 goes	blank	 while	using	 your	remote	 control,	 it	may	 be	the	 result	 of	the	 computer’s	 screen-saver	 or	power	 manage-
    ment software.
    Enabling the computer’s external display
    Displaying	an	image	on	the	notebook	PC’s	screen	does	not	necessarily	mean	it	outputs	a	signal	to	the	projector.
    When	using	a	PC	compatible	laptop,	a	combination	of	function	keys	will	enable/disable	the	external	display.
    Usually,	 the	combination	 of	the	 “Fn” 	key	 along	 with	one	of	the	 12	function	 keys	gets	the	external	 display	to	come	 on	
    or	off. 	For	 example,	 NEC	laptops	 use	Fn	+	F3,	 while	 Dell	laptops	 use	Fn	+	F8	 key	 combinations	 to	toggle	 through	
    external display selections.
    Connecting Your PC or Macintosh Computer
    NOTE:	Signals	supported	by	Plug	&	Play	(DDC2)
    Model
    INPUT
    COMPUTER 1 IN COMPUTER 2 IN
    analog analog digital
    NP610/NP510/NP410/NP310/
    NP510W/NP410W/NP610S/NP510WS Yes
    YesYes
    NP405/NP305 YesYes —
    NP405/NP305 
    						
    							18
    2. Installation and Connections
    •	 Select	the	source	name	for	its	appropriate	input	connector	after	turning	on	the	projector.
    [NP610/NP510/NP410/NP310/NP510W/NP410W/NP610S/NP510WS]
    Input	connectorSOURCE	button	on	the	projector	
    cabinetButton	on	the	remote	control
    COMPUTER	1	IN	COMPUTER1(COMPUTER	1)
    COMPUTER	2(DVI-I)IN
    	COMPUTER	2(DIGITAL)
    or
    	COMPUTER	2(ANALOG)
    (COMPUTER	2)
    [NP405/NP305]
    Input	connectorSOURCE	button	on	the	projector	
    cabinetButton	on	the	remote	control
    COMPUTER	1	IN	COMPUTER	1(COMPUTER	1)
    COMPUTER	2	IN	COMPUTER	2(COMPUTER	2)
    NOTE:	The	projector	is	not	compatible	with	video	decoded	outputs	of	the	NEC	ISS-6020	switcher.
    NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan 
    converter. 
    This is because the projector will process a video signal as a computer \
    signal at the default setting. In that case, do the following.
    * When an image is displayed with the lower and upper black portion of the\
     screen or a dark image is not displayed correctly:
    	 Project	an	image	to	fill	the	screen	and	then	press	the	AUTO	ADJ.	button	on	the	remote	control	or	the	projector	cabinet. 
    						
    							19
    2. Installation and Connections
    When Viewing a DVI Digital Signal (except NP405 and NP305)
    To	project	 a	DVI	 digital	 signal,	 be	sure	 to	connect	 the	PC	and	 the	projector	 using	a	DVI	 cable	 (not	supplied)	 before	
    turning	on	your	 PC	or	projector. 	Turn	 on	the	 projector	 first	and	 select	 Computer	 2	(Digital)	 from	the	source	 menu	before	
    turning	on	your	PC.
    Failure	 to	do	 so	may	 not	activate	 the	digital	 output	 of	the	 graphics	 card	resulting	 in	no	 picture	 being	displayed. 	Should	
    this	happen,	restart	your	PC.
    Do	 not	 disconnect	 the	DVI	 cable	 while	the	projector	 is	running. 	If	 the	 signal	 cable	has	been	 disconnected	 and	then	
    re-connected,	an	image	may	not	be	correctly	displayed. 	Should	this	happen,	restart	your	PC.
    NOTE: 
    •	 Use	a	DVI	 cable	 or	the	 one	 compliant	 with	the	DDWG	 (Digital	 Display	 Working	 Group)	DVI	(Digital	 Visual	Interface)	 revision	1.0	
    standard.	The	DVI	cable	should	be	within	5	m	(196")	long.	Both	single	and	dual	types	of	DVI	cable	can	be	used.
    •	 The	DVI	(DIGITAL)	 connector	accepts	VGA	(640	 x	480),	 SVGA	 (800	x	600),	 1152	x	864,	 XGA	(1024	 x	768),	 WXGA	 (1280	x	800	
    @	up	to	60Hz),	and	SXGA	(1280	x	1024	@	up	to	60Hz).
    COMPUTER 2 (DVI-I) IN
    PHONE 
    AUDIO IN
    Audio cable (not supplied)
    IBM	PC	or	Compatibles	(Desktop	type)or	Macintosh	(Desktop	type)
    DVI cable (not supplied) 
    						
    							20
    2. Installation and Connections
    COMPUTER 1 IN COMPUTER 2 (DVI-I) IN
    COMPUTER 2 INAUDIO IN
    PHONE
    VGA signal cable  
    (supplied)
    IBM	PC	or	Compatibles	(Notebook	type)	or	Macintosh	(Notebook	type)
    IBM	PC	or	Compatibles	(Desktop	type)	or	Macintosh	(Desktop	type)
    VGA signal cable (not 
    supplied)
    DVI to VGA adapter (supplied)
    NOTE:	 When	the	DVI	 to	VGA	 adapter	 is	not	 to	be	 used	 for	an	extended	 period	of	time,	 remove	 it	from	 the	projector.	 Failure	to	do	 so	
    may cause damage to the connector of the projector.
    Using Two Analog COMPUTER Inputs Simultaneously
    If	you	need	to	use	two	analog	COMPUTER	inputs	simultaneously,	connect	a	 VGA	signal	cable	as	shown	below.
    NP405/NP305
    Audio cable (not supplied) 
    						
    							21
    2. Installation and Connections
    Connecting an External Monitor
    You	can	connect	 a	separate,	 external	monitor	to	your	 projector	 to	simultaneously	 view	on	a	monitor	 the	computer	
    analog image you’re projecting.
    NOTE:
    •	 Daisy	chain	connection	is	not	possible.
    •	 When	audio	equipment	is	connected,	the	projector	speaker	is	disabled.
    AUDIO 
    IN PHONE 
    MONITOR OUT (COMP 1)
    AUDIO OUT 
    VGA signal cable (sup-
    plied)
    VGA signal cable (not supplied) 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Np510 Portable Projector User Manual