NEC Np510 Portable Projector User Manual

							52
4. Convenient Features
Install	Virtual	Remote	 Tool
Preparation:
Exit	all	running	 programs	 before	installing	 Virtual	Remote	 Tool.	If	 another	 program	 is	running,	 the	installation	 may	not	
be	completed. 	To	 install	 Virtual	 Remote	 Tool,	the	Windows	 user	account	 must	have	[Administrator]	 privilege	(Windows	
Vista	and	 Windows	2000)	or	[Computer	Administrator]	privilege	(Windows	XP).
1 Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive.
	 The	 folders	in	NEC	 Projector	 CD-ROM	 will	be	displayed. 	If	 the	 folders	 are	not	displayed,	 right-click	the	CD/DVD	
drive icon in Windows’ “Computer” (or “My Computer”) and select “Open”.
2 Double-click “software” and then “Virtual Remote Tool”.
 The “setup.exe” icon will be displayed.
3 Double-click the “setup.exe” icon.
 The Installer will start and the Wizard screen will appear.
4 Click “Next”.
 “END USER LICENSE AGREEMENT” screen will be displayed.
 Read “END USER LICENSE AGREEMENT” carefully.
5 If you agree, click “I accept the terms in the license agreement” and then click “Next”.
 Follow the instructions on the installer screens to complete the installation.
 After the installation is completed, the shortcut icon 	for	 Virtual	Remote	 Tool	will	be	placed	on	the	desktop. 
						

							53
4. Convenient Features
TIP:
Uninstalling	Virtual	Remote	 Tool
Preparation:
Exit	Virtual	 Remote	 Tool	before	 uninstalling. 	To	 uninstall	 Virtual	Remote	 Tool,	the	Windows	 user	account	 must	have	
“Administrator” 	privilege	(Windows	 Vista	and	Windows	2000)	or	 “Computer	Administrator” 	privilege	(Windows	XP).
•	For	Windows	 Vista
1 Click “Start” and then “Control Panel”.
 The Control Panel window will be displayed.
2 Click “Uninstall a program” under “Programs”
 The “Programs and Features” window will be displayed.
3 Select Virtual Remote Tool and click it.
4 Click “Uninstall/Change” or “Uninstall”.
	 •	 When	the	 “User	Account	Control” 	windows	is	displayed,	click	 “Continue”.
 Follow the instructions on the screens to complete the uninstallation.
•	For	 Windows	XP/2000
1 Click “Start” and then “Control Panel”.
 The Control Panel window will be displayed.
2 Double-click “Add / Remove Programs”.
 The Add / Remove Programs window will be displayed.
	 •	On	 Windows	2000,	double-click	 “Uninstall	a	program”.
3 Click Virtual Remote Tool from the list and then click “Remove”.
 Follow the instructions on the screens to complete the uninstallation.
Step 2: Connect the projector to the computer
1 Use the supplied VGA signal cable to connect the COMPUTER 1 IN connector of the projector directly with 
the monitor output connector of the computer.
2 Connect the supplied power cable to the AC IN of the projector and the wall outlet, and then press the Main 
Power switch to turn on the main power.
 The projector is in the standby condition.
COMPUTER 1 IN
TIP:
•	 When	Virtual	Remote	Tool	starts	for	the	first	time,	“Easy	Setup”	window	will	be	displayed	to	navigate	your	connections.
AC	InputMain	Power	Switch
VGA signal cable (supplied)
→ To wall outlet
Power cable (supplied) 
						

							54
4. Convenient Features
Step 3: Start Virtual Remote Tool
1 Double-click the shortcut icon  on the Windows Desktop.
 When Virtual Remote Tool starts for the first time, “Easy Setup” window will be displayed.
 Follow the instructions on the screens
 When “Easy Setup” is completed, the Virtual Remote Tool screen will be displayed.
TIP:
•	 The	Virtual	Remote	Tool	screen	(or	Toolbar)	can	be	displayed	without	displaying	“Easy	Setup”	window.
	 To	do	so,	click	to	place	a	check	mark	for	“		Do	not	use	Easy	Setup	next	time”	on	the	screen	at	Step	6	in	“Easy	Setup”. 
						

							55
4. Convenient Features
Exiting	Virtual	Remote	 Tool
1 Click the Virtual Remote Tool icon  on the Taskbar.
 The pop-up menu will be displayed.
2 Click “Exit”.
 The Virtual Remote Tool will be closed.
Viewing	the	help	file	of	 Virtual	Remote	Tool
•	Displaying	the	help	file	using	the	taskbar
1 Click the Virtual Remote Tool icon  on the taskbar when Virtual Remote Tool is running.
 The pop-up menu will be displayed.
2. Click “Help”.
  The Help screen will be displayed.
•	Displaying	the	help	file	using	the	Start	Menu.
1. Click “Start”. “All programs” or “Programs”. “NEC Projector User Supportware”. “Virtual Remote Tool”. and 
then “Virtual Remote Tool Help” in this order.
  The Help screen will be displayed. 
						

							56
5. Using On-Screen Menu
1 Using the Menus
NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE: The commands such as ENTER,	EXIT,	,  in the bottom show available buttons for your operation.
2.  Press the  buttons on the remote control or the projector cabinet to display the submenu.
3.  Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first 
tab.
4.  Use the  buttons on the remote control or the projector cabinet to select the item you want to adjust or 
set.
  You can use the  buttons on the remote control or the projector cabinet to select the tab you want.
5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window.
6.  Adjust the level or turn the selected item on or off by using the  buttons on the remote control or 
the projector cabinet.
Changes	are	stored	until	adjusted	again.
7.  Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the projec-
tor cabinet to quit the menu display.
NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.
8.   Press the MENU button to close the menu.
 To return to the previous menu, press the EXIT button. 
						

							57
5. Using On-Screen Menu
 Menu Elements
Slide barSolid triangleTab
Radio button
High Altitude symbol
Menu	windows	or	dialog	boxes	typically	have	the	following	elements:
Highlight .............................Indicates the selected menu or item. 
Solid triangle
 ......................Indicates further choices are available. A highlighted triangle indicate\
s the item is active. 
Tab
 ......................................Indicates a group of features in a dialog box. Selecting on any tab brin\
gs its page to the front.
Radio button
 .......................Use this round button to select an option in a dialog box.
Source
 ................................Indicates the currently selected source.
Off Timer remaining time
 ....Indicates the remaining countdown time when the [OFF TIMER] is preset.
Slide bar
 .............................Indicates settings or the direction of adjustment.
Key Lock symbol
 ................Indicates the [CONTROL PANEL LOCK] is enabled.
Thermometer symbol
 .........Indicates  the  [ECO  MODE]  is  forcibly  set  to  [ON]  mode  because  the  internal  temperature  is  too 
high.
High Altitude symbol
 ..........Indicates the [FAN MODE] is set to [HIGH ALTITUDE] mode.
Source
Available buttons
Thermometer symbol
Key	Lock	symbol
Off Timer remaining 
time
Highlight 
						

							58
5. Using On-Screen Menu
 List of Menu Items
Some menu items are not available depending on the input source.
Menu	ItemDefaultOptions
SOURCE COMPUTER1
*
COMPUTER2(DIGITAL)*
1*
COMPUTER2(ANALOG)*1*
VIDEO *
S-VIDEO *
ADJUST PICTUREPRESET
*1–6
DETAIL	SETTINGS GENERAL
REFERENCE *
HIGH-BRIGHT,	PRESENTATION,	 VIDEO,	MOVIE,	GRAPHIC,	sRGBGAMMA	CORRECTIONDYNAMIC,	NATURAL,	BLACK	DETAIL
COLOR	TEMPERATURE*
5000, 6500, 7800, 8500, 9300, 10500DYNAMIC	CONTRAST*2*OFF,	ON
IMAGE	MODE*STILL,	MOVIEWHITE	BALANCECONTRAST	R0CONTRAST	G0CONTRAST	B0BRIGHTNESS	R 0BRIGHTNESS	G0BRIGHTNESS	B0
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
HUE
RESET
IMAGE	OPTIONS CLOCK
*
PHASE *
HORIZONTAL *
VERTICAL *
OVERSCAN *0[%],	5[%],	10[%]
ASPECT	RATIO*NP610/NP510/NP410/NP405/NP310/NP305/NP610S: 	AUTO,	4:3,	16:9,	15:9,	16:10,	WIDE	ZOOM,	NATIVE
*NP510W/NP410W/NP510WS: 	AUTO,	4:3,	16:9,	15:9,	16:10,	LETTERBOX,	NATIVEPOSITION 0(Not	available	on	NP510W/NP410W/NP510WS)
SETUPGENERAL
DIGITAL	ZOOM*3100
80–100AUTO	KEYSTONEOFFOFF,	ONKEYSTONE 0KEYSTONE	SAVEOFFOFF,	ON
WALL	COLOROFFOFF,	WHITEBOARD,	BLACKBOARD,	BLACKBOARD	(GRAY),	LIGHT	 YELLOW,	LIGHT	GREEN,	LIGHT	BLUE,	SKY	BLUE,	LIGHT	ROSE,	PINKECO	MODEOFFOFF,	ON
CLOSED	CAPTIONOFFOFF,	CAPTION1,	CAPTION2,	CAPTION3,	CAPTION4,	TEXT1,	TEXT2,	TEXT3,	TEXT4
LANGUAGE ENGLISH
ENGLISH,	DEUTSCH,	FRANÇAIS,	ITALIANO,	ESPAÑOL,	SVENSKA,	日本語DANSK,	PORTUGUÊS,	ČEŠTINA,	MAGYAR,	 POLSKI,	NEDERLANDS,	SUOMINORSK,	TÜRKÇE, 	РУССКИЙ, , Ελληνικά,  中文, 한
국어
MENU
COLOR	SELECTCOLORCOLOR,	MONOCHROMESOURCE	DISPLAYONOFF,	ONID	DISPLAYONOFF,	ONECO	MESSAGEOFFOFF,	ONDISPLAY	 TIMEAUTO	45	SECMANUAL,	AUTO	5	SEC,	AUTO	15	SEC,	AUTO	45	SECBACKGROUND BLUEBLUE,	BLACK,	LOGOFILTER	MESSAGE500[H]OFF,	100[H],	200[H],	500[H],	1000[H]
*	 The	asterisk	(*)	indicates	that	the	default	setting	varies	depending	on	the	signal.
*1:	 COMPUTER	2(DIGITAL)	is	not	 available	 on	NP405	 and	NP305. 	The	 source	 for	the	 computer	 2	analog	 signal	is	displayed	 as	“COMPUTER2” 	on	NP405 and NP305.*2:	 DYNAMIC	CONTRAST	is	available	on	NP410	and	NP310	only.*3:	 DIGITAL	ZOOM	is	available	on	NP610S	and	NP510WS	only.*4:	 Wired	LAN	is	not	supported	by	NP405	and	NP305. 
						

							59
5. Using On-Screen Menu
SETUP
INSTALLATIONORIENTATION
DESKTOP	FRONTDESKTOP	FRONT,	CEILING	REAR,	DESKTOP	REAR,	CEILING	FRONTCONTROL	PANEL	LOCKOFFOFF,	ONSECURITY
OFFOFF,	ONCOMMUNICATION	SPEED19200bps4800bps, 9600bps, 19200bps
CONTROL	IDCONTROL	ID	NUMBER 1
1–254CONTROL	IDOFFOFF,	ON
OPTIONS(1)
AUTO	ADJUSTNORMALOFF,	NORMAL,	FINEFAN	MODEAUTOAUTO,	HIGH,	HIGH	ALTITUDE
SIGNAL	SELECT COMPUTER1
RGB/
COMPONENT
RGB/COMPONENT,	RGB,	COMPONENT
COMPUTER2	(ANALOG)*1RGB/
COMPONENTRGB/COMPONENT,	RGB,	COMPONENT
VIDEO AUTOAUTO,	NTSC3.58,	NTSC4.43,	PAL,	PAL-M,	PAL-N,	PAL60,	SECAM
S-VIDEOAUTOAUTO,	NTSC3.58,	NTSC4.43,	PAL,	PAL-M,	PAL-N,	PAL60,	SECAM
WXGA	MODE
NP610/NP510/
NP410/NP405/
NP310/NP305/
NP610S:	OFF	NP510W/
NP410W/
NP510WS: 	ON
OFF,	ON
DEINTERLACE ONOFF,	ONBEEPONOFF,	ON
OPTIONS(2)
OFF	TIMEROFFOFF,	0:30,	1:00,	2:00,	4:00,	8:00,	12:00,	16:00STANDBY	MODENORMALNORMAL,	POWER-SAVINGAUTO	POWER	ON(AC)OFFOFF,	ONAUTO	POWER	ON(COMP1)OFFOFF,	ONAUTO	POWER	OFFOFFOFF,	0:05,	0:10,	0:20,	0:30
DEFAULT	SOURCE	SELECTLASTLAST,	AUTO,	COMPUTER1,	COMPUTER2(DIGITAL)*1, COMPUTER2(ANALOG),	 VIDEO,	S-VIDEO
INFO.
USAGE	TIME
LAMP	LIFE	REMAININGLAMP	HOURS	USEDFILTER	HOURS	USEDTOTAL	CARBON	SAVINGS
SOURCE
SOURCE	NAMESOURCE	INDEXHORIZONTAL	FREQUENCYVERTICAL	FREQUENCYSIGNAL	 TYPEVIDEO	TYPESYNC	TYPESYNC	POLARITYSCAN	TYPE
WIRED	LAN*4
PROJECTOR	NAMEIP	ADDRESSSUBNET	MASKGATEWAYMAC	ADDRESS
VERSION PRODUCT
SERIAL	NUMBERFIRMWARE
D ATA
CONTROL	ID	(when	[CONTROL	ID]	is	set)
RESET
CURRENT	SIGNALALL	DATANETWORK	SETTINGS*4
CLEAR	LAMP	HOURSCLEAR	FILTER	HOURS
*	 The	asterisk	(*)	indicates	that	the	default	setting	varies	depending	on	the	signal.
*1:	 COMPUTER	
2(DIGITAL)	is	not	 available	 on	NP405	 and	NP305. 	The	 source	 for	the	 computer	 2	analog	 signal	is	displayed	 as	“COMPUTER2” 	on	NP405 and NP305.*2:	 DYNAMIC	CONTRAST	is	available	on	NP410	and	NP310	only.*3:	 DIGITAL	ZOOM	is	available	on	NP610S	and	NP510WS	only.*4:	 Wired	LAN	is	not	supported	by	NP405	and	NP305. 
						

							60
5. Using On-Screen Menu
 Menu Descriptions & Functions [SOURCE]
[NP610/NP510/NP410/NP310/NP510W/NP410W/
NP610S/NP510WS][NP405/NP305]
COMPUTER1
Selects	the	computer	connected	to	your	COMPUTER	1	IN	input	connector.
NOTE:
•	 When	the	component	input	signal	is	connected	to	the	COMPUTER	1	IN	connector,	select	[COMPUTER1].
•	 The	projector	will	determine	if	the	input	signal	is	RGB	or	component	signal.
COMPUTER2	(DIGITAL	&	ANALOG)
Selects	the	computer	connected	to	your	COMPUTER	2	IN	(DVI-I)	connector.
COMPUTER2	(NP405	and	NP305	only)
Selects	the	computer	connected	to	your	COMPUTER2	IN	connector.
VIDEO
Selects	what	is	connected	to	your	VIDEO	input-VCR,	DVD	player	or	document	camera.
S-VIDEO
Selects	what	is	connected	to	your	S-VIDEO	input-VCR	or	DVD	player.
NOTE:	A	frame	 may	freeze	 for	a	brief	 period	 of	time	 when	 a	video	 is	played	 back	in	fast-forward	 or	fast-rewind	 with	a	Video	 or	S-
Video source. 
						

							61
5. Using On-Screen Menu
 Menu Descriptions & Functions [ADJUST]
[PICTURE]
[PRESET]
This	function	allows	you	to	select	optimized	settings	for	your	projected	image.
You	can	adjust	neutral	tint	for	yellow,	cyan	or	magenta.	
There	are	six	factory	 presets	 optimized	 for	various	 types	of	images. 	You	 can	also	 use	[DETAIL	 SETTINGS]	 to	set	 user	
adjustable	settings	to	customize	each	gamma	or	color.
Your	settings	can	be	stored	in	[PRESET	1]	to	[PRESET	6].
HIGH-BRIGHT ........Recommended for use in a brightly lit room.
PRESENTATION
 .....Recommended for making a presentation using a PowerPoint file.
VIDEO
 ....................Recommended for typical TV program viewing.
MOVIE
 ...................Recommended for movies.
GRAPHIC
 ...............Recommended for graphics.
sRGB
 .....................Standard color values
[DETAIL SETTINGS]
[NP610/NP510/NP405/NP305/NP510W/NP410W/
NP610S/NP510WS] [NP410/NP310]