NEC Np2000 Lcd Projector Users Manual

51
Structure of the HTTP Server
Power: This controls the power of the projector.
On ................... Power is switched on.
Off ................... Power is switched off.
Volume: This controls the volume of the projector.

..................... Increases the volume adjustment value.
..................... Decreases the volume adjustment value.
Mute: This controls the mute function of the projector.
Picture On ....... Mutes the video.
Picture Off ....... Cancels the video muting.
Sound On ........ Mutes...

52
Source Select: This switches the input connector of the projector.
Computer1 ...... Switches to the COMPUTER 1 IN connector.
Computer2 ...... Switches to the COMPUTER 2 IN connector.
Computer3 ...... Switches to the COMPUTER 3 IN connector.
Component ..... Switches to the COMPONENT IN connectors.
Video ............... Switches to the VIDEO IN connector.
S-Video ........... Switches to the S-VIDEO IN connector.
Viewer ............. Switches to the data on the PC card or USB memory device.
LAN...

53
4. Convenient Features
 Using the Projector to Operate a Computer Connected on a
Network (Desktop Control Utility 1.0)
When Desktop Control Utility 1.0 on the included User Supportware 3 CD-ROM is installed on the computer, that
computer can be operated using the projector over a network.
For example, say you have a PowerPoint file on a computer in your office that you want to use for a presentation at a
meeting. If the computer in the office is connected by LAN to the projector in the meeting room,...

54
4. Convenient Features
Important:
•Your startup password will be required each time
you start Desktop Control Utility 1.0.
•If you forget or lost your startup password, in-
stall the program again.
Operations on the Computer
1. Connect the computer to the LAN and make the required settings.
2. Install Desktop Control Utility 1.0 on the computer.
•For instructions on installing and operating the software, see the User Supportware 3 Users Guide (PDF)
contained on User Supportware 3 CD-ROM.
3. Prepare...

55
4. Convenient Features
Operations on the projector – Connecting to the computer
1. Make the LAN settings on the projector.
Make the LAN settings at [Setup] 
→ [Installation] → [LAN Mode] in the menu.  (→ page 89)
2. Connect a commercially available USB mouse to the projector. (
→ page 38)
3. Click anywhere on the screen with the USB mouse.
The menu appears.
4. Click [Source], then click [LAN].
The help message is displayed.
The message is displayed only when a password for Desktop Control Utility 1.0...

56
9. Input the password you made a note of in the previous Step 6 in “Operations on the Computer”.
10. Input the password and click [OK].
The password input window is turned off.
11.Click the PC search icon 
.
The PC search window appears.
12. Click [OK].
The connection selection window appears.
•To search by inputting the IP address of the connected computer, click 
 on the PC Search window, click
[Input IP Address], then click [OK].
13.  Click the computer to which you want to connect, then click...

57
The following operations are available only with buttons on the projector cabinet or the remote control.
 
 Disconnect icon ................. Use to cut off communications with the computer.
 
 Shift icon ............................ Select this icon and press the ENTER button to set the shift lock mode. Select this icon and
press the ENTER button again to cancel the shift lock mode.
 
 Ctrl icon ............................. Select this icon and press the ENTER button to set the control lock mode....

58
5. Using the Viewer

 Making the Most out of the Viewer Function
Features
The Viewer feature allows you to view slides stored on a PC memory card (referred to as PC card in this manual) or
USB memory on the projector. Even if no computer is available, presentations can be conducted simply with the
projector. This feature is convenient for holding presentations at meetings and in offices, as well as for playing images
taken on digital cameras.
Easy to use
•Presentations can be started immediately...

59
5. Using the Viewer
 Saving data to a PC card or USB memory device
There are two ways to save your data to a PC card or USB memory device.
Using Ulead Photo Explorer 8.0
Install Ulead Photo Explorer 8.0 from the supplied User Supportware 3 CD-ROM to your computer. Use Ulead Photo
Explorer 8.0 to create PowerPoint files or graphic data on your computer and save the files to a PC card or USB
memory device.
Files created on Ulead Photo Explorer 8.0 are index format.
For more details about Ulead Photo...

60
5. Using the Viewer
 Operating the Viewer Function from the Projector (playback)
This section describes the operation for showing slides created using the Viewer function with the projector. It is also
possible to make slides directly from the images projected with the projector.
Projecting slides (Viewer)
Preparation: Store JPEG or BMP files (JPEG, BMP, non-interlaced GIF or non-interlaced PNG files) in a PC card or
USB memory inserted into your PC.
To start the Viewer, press the SOURCE button on...