NEC Np2000 Lcd Projector Users Manual

91
6. Using On-Screen Menu
[PC Card]
Profiles (for PC Card):
To execute a wireless LAN easily using Image Express Utility 2.0, select [Easy Connection].
Up to two settings for the optional wireless LAN card can be stored in memory of the projector.
Select [Profile 1] or [Profile 2] and then do settings for [DHCP] and the other options.
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
DHCP:
Place a check mark to automatically assign an IP address to the...

92
6. Using On-Screen Menu
[Advanced] menu
[Network Type] (required for wireless only)
Site Survey:
Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access.
To select an SSID, highlight [SSID] and use the SELECT   to select [OK] and press the ENTER button.
 : access point
 : Ad Hoc PC
 : WEP enabled
NOTE: You cannot connect to a device with the SSID for Channel 14 because it is not displayed in the list.
SSID (Network name):
Enter an identifier (SSID) for...

93
6. Using On-Screen Menu
[WEP] (required for wireless only)
Select this option whether using the WEP (Wired Equivalent Privacy) key for encryption or not. To use encryption,
specify WEP key.
Disable .................. Will not turn on the encryption feature. Your communications may be monitored by someone.
64bit ...................... Uses 64-bit datalength for secure transmission.
128bit .................... Uses 128-bit datalength for secure transmission. This option will increase privacy and...

94
6. Using On-Screen Menu
Using Software Keyboard to enter an encryption key
1. Select one of [Key 1], [Key 2], [Key 3] and [Key 4] and press the ENTER button.
The software keyboard will be displayed.
2. Use the SELECT 
  button to select one key and press the ENTER button.
3. After finishing entering the WEP key, use the SELECT 

 button to select [OK] and press the
ENTER button.
The software keyboard will disappear.
[Domain]
Host Name ............ Type in a hostname. Up to 60 alphanumeric...

95
6. Using On-Screen Menu
[Mail]
Alert Mail:
Checking this box enables Alert Mail feature.
This option notifies your computer of an error message via e-mail when using wireless or wired LAN. The error
message will be notified when the projector lamp has reached the end of its usable life or an error occurs in the
projector.
Sample of a message sent from the projector:
The lamp is at the end of its usable life. Please replace the lamp.
Projector Name: X X X X
Lamp Hours Used: xxxx [H]
Projector Hours...

96
6. Using On-Screen Menu
[Projector Name]
Specify a unique projector name. Press  to display the software keyboard and type in. Up to 16 alphanumeric
characters can be used. After entering a name, select [OK] and press the ENTER button.
Using Software Keyboard
1 to 0 and
Characters ....... Use to type in password or keyword.
MODE .................... Selects one of three modes for alphabet and special characters.
SP ......................... Inserts a space
BS ......................... Deletes one...

97
6. Using On-Screen Menu
[Options]
Setting Auto Adjust [Auto Adjust]
This feature sets the Auto Adjust mode so that the RGB image can be automatically or manually adjusted for noise
and stability. You can automatically make adjustment in two ways: [Normal] and [Fine].
Off ......................... The RGB image will not be automatically adjusted.
You can manually optimize the RGB image.
Normal .................. Default setting. The RGB image will be automatically adjusted. Normally select this...

98
6. Using On-Screen Menu
Selecting Signal Format [Signal Select]
Computer 1/2
Allows you to set [Computer 1] and [Computer 2] to automatically detect an incoming RGB or component source
such as a computer or DVD player. However there may be some RGB and component signals that the projector is
unable to detect. In this case, select [RGB] or [Component].
Select [Scart] in COMPUTER 1 for the European Scart signal.
Component
Select a signal type from the COMPONENT (Y, Cb/Pb, Cr/Pr) connectors.
Component...

99
6. Using On-Screen Menu
[Tools]
Selecting the ChalkBoard [ChalkBoard]
This option displays the ChalkBoard tool bar.
The ChalkBoard feature allows you to write and draw messages on a projected image. (→ page 44)
NOTE: The ChalkBoard feature is available only when a USB mouse is used.
Using Off Timer [Off Timer]
1. Select your desired time between 30 minutes and 16 hours: Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2. Select [OK] and press the ENTER button on the remote control.
3. The remaining...

100
NOTE:
•Before setting the Program Timer, make sure that the [Date, Time Preset] feature is set. (
→ page 96)
•Make sure that the projector is in the stand by condition with the Main Power Switch on.
•The projector has a built-in clock. The clock will keep working for about two weeks after the main power is turned off. If the main
power is not supplied to the projector for two weeks or more, the built-in clock stops working.
Setting the Program Timer
1. On the Program Timer screen, use the SELECT 
 or...