NEC Np2000 Lcd Projector Users Manual

71
6. Using On-Screen Menu
[Entry Edit Command]
You can edit signals on the [Entry List].
Load ...................... Enables you to select a signal from the list.
Store ..................... Enables you to store the currently projected signal.
Cut ........................ Enables you to remove a selected signal from the list and place it on the clipboard in the projector.
Copy ...................... Enables you to copy a selected signal from the list and place it on the clipboard in the projector.
Paste...

72
6. Using On-Screen Menu
 Menu Descriptions & Functions [Adjust]
[Picture]
[Mode]
This function allows you to determine how to save settings for [Detail Settings] of [Preset] for each input.
   Standard : Saves settings for each item of [Preset] (Preset 1 through 6)
   Professional : Saves all the settings of [Picture] for each input.
[Preset]
This option allows you to adjust neutral tint for yellow, cyan or magenta. There are six factory presets optimized for
various types of images, you can set user...

73
6. Using On-Screen Menu
[Detail Settings]
This will provide you with three pages of menus that provide more detailed settings.
[General]
Selecting Reference Setting [Reference]
This feature allows you to use color correction or gamma values as reference data to optimize for various types of
images. You can select one of the following six settings.
High-Bright ........ Recommended for the use in a brightly lit room.
Presentation ...... Recommended for making a presentation using a PowerPoint file....

74
6. Using On-Screen Menu
[Brightness]
Adjusts the brightness level or the back raster intensity.
[Contrast]
Adjusts the intensity of the image according to the incoming signal.
You have two options: Manual and Auto.
NOTE: The Auto Contrast function will not work when the menu or a message is displayed
[Sharpness]
Controls the detail of the image for Video (not valid for RGB and digital signals).
[Color]
Increases or decreases the color saturation level (not valid for RGB and digital signals).
[Hue]...

75
6. Using On-Screen Menu
[Image Options]
Adjusting Clock and Phase [Clock/Phase]
This allows you to manually adjust Clock and Phase.
Clock ..................... Use this item to fine tune the computer image or to remove any vertical banding that might appear. This
function adjusts the clock frequencies that eliminate the horizontal banding in the image.
This adjustment may be necessary when you connect your computer for the first time.
Phase .................... Use this item to adjust the clock phase...

76
6. Using On-Screen Menu
Adjusting Horizontal/Vertical Position [Horizontal/Vertical Position]
Adjusts the image location horizontally and vertically.
Masking Unwanted Area [Blanking]
This feature allows you to mask any unwanted area of the screen image.
Selecting Overscan Percentage [Overscan]
Select overscan percentage (0%, 5% and 10%) for signal.
Projected image
Overscaned by 10%
NOTE: You cannot select [0%] for some input signals. 

77
6. Using On-Screen Menu
Input
Signal
Screen
Type
4:3 Screen
16:9 Screen4:3
4:3 Window
4:3 FillSqueeze
Wide Screen
Wide ScreenCrop
Letterbox 4:3Letterbox Letterbox
Selecting Aspect Ratio [Aspect Ratio]
Screen Type 4:3 Screen Type 16:9
Aspect Ratio allows you to select the best Aspect mode to display your source image.
When screen type 4:3 is selected for the source, the following selections will display:
4:3 ......................... Standard 4:3 aspect
Letter Box .............. Reduced to display the...

78
6. Using On-Screen Menu
[Video]
Turning On/Off 3 Dimension Separation [3D Y/C Separation]
This function turns on or off the 3 dimensional separation feature.
Off ............................... Turns off the function.
On Still ................. Recommended for a still image.
Normal ............ The projector detects and corrects the image automatically.
Movie .............. Recommended for a moving image.
TIP: When the image is poor quality, turn on [3D Y/C Separation]. If there is still poor quality,...

79
6. Using On-Screen Menu
[Sound]
Controlling Sound [Volume/Bass/Treble/Balance]
Adjusts the volume, bass and treble level, left and right balance of the projector speaker and AUDIO OUT (Stereo Mini
Jack).
Enabling 3D Surround [3D Surround]
Turn on or off the 3D surround effect.
If the AUDIO OUT stereo mini jack of the projector is connected to an external equipment, adjusting the sound on the
external equipment can cause sound to be distorted or cracked, depending on the bass, treble or 3D Surround...

80
6. Using On-Screen Menu
 Menu Descriptions & Functions [Setup]
[Basic]
Selecting Keystone Mode [Keystone]
This feature allows you to correct keystone distortion.
Selecting this item will display the Keystone setting menu.
You can correct vertical distortion manually from the menu. (→ page 31)
Changes will be saved even when you turn off the projector.
NOTE: When [Cornerstone] is selected, [Keystone] is not available.
Selecting Cornerstone Mode [Cornerstone]
This option allows you to correct...