NEC Np1250 Lcd Projector Users Manual
Here you can view all the pages of manual NEC Np1250 Lcd Projector Users Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
9
6. Using On-Screen Menu
[AUDIO]
Controlling Sound [VOLUME/BASS/TREBLE/BALANCE]
Adjusts the volume, bass and treble level, left and right balance of the projector speaker and AUDIO OUT (Stereo
Mini Jack).
TIP:
[VOLUME]
• When no menus appear, the SELECT and buttons on the projector cabinet and the VOLUME +/− buttons work as a volume
control.
[BALANCE]
• When the left/monaural of the video/component audio input is connected, the right and left channel sound from the AUDIO...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-110.png "Page 111
9
6. Using On-Screen Menu
[AUDIO]
Controlling Sound [VOLUME/BASS/TREBLE/BALANCE]
Adjusts the volume, bass and treble level, left and right balance of the projector speaker and AUDIO OUT (Stereo
Mini Jack).
TIP:
[VOLUME]
• When no menus appear, the SELECT and buttons on the projector cabinet and the VOLUME +/− buttons work as a volume
control.
[BALANCE]
• When the left/monaural of the video/component audio input is connected, the right and left channel sound from the AUDIO...")
9 6. Using On-Screen Menu [AUDIO] Controlling Sound [VOLUME/BASS/TREBLE/BALANCE] Adjusts the volume, bass and treble level, left and right balance of the projector speaker and AUDIO OUT (Stereo Mini Jack). TIP: [VOLUME] • When no menus appear, the SELECT and buttons on the projector cabinet and the VOLUME +/− buttons work as a volume control. [BALANCE] • When the left/monaural of the video/component audio input is connected, the right and left channel sound from the AUDIO...
Page 112
![Page 112
98
6. Using On-Screen Menu
Menu Descriptions & Functions [SETUP]
[BASIC]
Selecting Keystone Mode [KEYSTONE]
This feature allows you to correct keystone distortion.
Selecting this item will display the Keystone setting menu.
You can correct vertical distortion manually from the menu. (→ page 30)
Changes will be saved even when you turn off the projector.
NOTE: The [KEYSTONE] item is not available when [CORNERSTONE] or [GEOMET\
RIC CORRECTION] is selected.](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-111.png "Page 112
98
6. Using On-Screen Menu
Menu Descriptions & Functions [SETUP]
[BASIC]
Selecting Keystone Mode [KEYSTONE]
This feature allows you to correct keystone distortion.
Selecting this item will display the Keystone setting menu.
You can correct vertical distortion manually from the menu. (→ page 30)
Changes will be saved even when you turn off the projector.
NOTE: The [KEYSTONE] item is not available when [CORNERSTONE] or [GEOMET\
RIC CORRECTION] is selected.")
98 6. Using On-Screen Menu Menu Descriptions & Functions [SETUP] [BASIC] Selecting Keystone Mode [KEYSTONE] This feature allows you to correct keystone distortion. Selecting this item will display the Keystone setting menu. You can correct vertical distortion manually from the menu. (→ page 30) Changes will be saved even when you turn off the projector. NOTE: The [KEYSTONE] item is not available when [CORNERSTONE] or [GEOMET\ RIC CORRECTION] is selected.
Page 113
![Page 113
99
6. Using On-Screen Menu
Selecting Cornerstone Mode [CORNERSTONE]
This option allows you to correct trapezoidal distortion.
Selecting this item will display the Cornerstone adjustment screen. (→ page 40)
NOTE: The [CORNERSTONE] item is not available when [KEYSTONE] or [GEOMET\
RIC CORRECTION] is selected.
Using the PIP/SIDE BY SIDE Function [PIP/SIDE BY SIDE]
This function allows you to view two different signals simultaneously. (→ page 43)
MODE:
This option allows you to select two modes: PIP and...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-112.png "Page 113
99
6. Using On-Screen Menu
Selecting Cornerstone Mode [CORNERSTONE]
This option allows you to correct trapezoidal distortion.
Selecting this item will display the Cornerstone adjustment screen. (→ page 40)
NOTE: The [CORNERSTONE] item is not available when [KEYSTONE] or [GEOMET\
RIC CORRECTION] is selected.
Using the PIP/SIDE BY SIDE Function [PIP/SIDE BY SIDE]
This function allows you to view two different signals simultaneously. (→ page 43)
MODE:
This option allows you to select two modes: PIP and...")
99 6. Using On-Screen Menu Selecting Cornerstone Mode [CORNERSTONE] This option allows you to correct trapezoidal distortion. Selecting this item will display the Cornerstone adjustment screen. (→ page 40) NOTE: The [CORNERSTONE] item is not available when [KEYSTONE] or [GEOMET\ RIC CORRECTION] is selected. Using the PIP/SIDE BY SIDE Function [PIP/SIDE BY SIDE] This function allows you to view two different signals simultaneously. (→ page 43) MODE: This option allows you to select two modes: PIP and...
Page 114
![Page 114
00
6. Using On-Screen Menu
Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
Setting Lamp Mode to Normal or Eco [LAMP MODE]
This feature enables you to select two brightness modes of the lamp: Normal and Eco modes. The lamp life can be
extended by using the Eco mode. Selecting Eco mode decreases fan noise when compared to Normal mode.
Lamp Mode DescriptionStatus of LAMP indicator...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-113.png "Page 114
00
6. Using On-Screen Menu
Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
Setting Lamp Mode to Normal or Eco [LAMP MODE]
This feature enables you to select two brightness modes of the lamp: Normal and Eco modes. The lamp life can be
extended by using the Eco mode. Selecting Eco mode decreases fan noise when compared to Normal mode.
Lamp Mode DescriptionStatus of LAMP indicator...")
00 6. Using On-Screen Menu Using the Wall Color Correction [WALL COLOR] This function allows for quick adaptive color correction in applications where the screen material is not white. Setting Lamp Mode to Normal or Eco [LAMP MODE] This feature enables you to select two brightness modes of the lamp: Normal and Eco modes. The lamp life can be extended by using the Eco mode. Selecting Eco mode decreases fan noise when compared to Normal mode. Lamp Mode DescriptionStatus of LAMP indicator...
Page 115
![Page 115
0
6. Using On-Screen Menu
Using Off Timer [OFF TIMER]
1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2. Press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
NOTE:
• To cancel the preset time, set [OFF] for the preset time or turn off the \
power.
• When the remaining time reaches 3 minutes before the projector is turned off, the...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-114.png "Page 115
0
6. Using On-Screen Menu
Using Off Timer [OFF TIMER]
1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2. Press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
NOTE:
• To cancel the preset time, set [OFF] for the preset time or turn off the \
power.
• When the remaining time reaches 3 minutes before the projector is turned off, the...")
0 6. Using On-Screen Menu Using Off Timer [OFF TIMER] 1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00. 2. Press the ENTER button on the remote control. 3. The remaining time starts counting down. 4. The projector will turn off after the countdown is complete. NOTE: • To cancel the preset time, set [OFF] for the preset time or turn off the \ power. • When the remaining time reaches 3 minutes before the projector is turned off, the...
Page 116
![Page 116
0
6. Using On-Screen Menu
Setting a new program timer
1. On the PROGRAM TIMER screen, use the SELECT or button to select [SETTINGS] and press the EN-
TER button.
The [PROGRAM LIST] screen will be displayed.
NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited.
2. Select a blank program number and press the ENTER button.
The [EDIT] screen will be displayed.
3. Make settings for each item as required....](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-115.png "Page 116
0
6. Using On-Screen Menu
Setting a new program timer
1. On the PROGRAM TIMER screen, use the SELECT or button to select [SETTINGS] and press the EN-
TER button.
The [PROGRAM LIST] screen will be displayed.
NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited.
2. Select a blank program number and press the ENTER button.
The [EDIT] screen will be displayed.
3. Make settings for each item as required....")
0 6. Using On-Screen Menu Setting a new program timer 1. On the PROGRAM TIMER screen, use the SELECT or button to select [SETTINGS] and press the EN- TER button. The [PROGRAM LIST] screen will be displayed. NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited. 2. Select a blank program number and press the ENTER button. The [EDIT] screen will be displayed. 3. Make settings for each item as required....
Page 117
![Page 117
03
6. Using On-Screen Menu
4. Select [OK] and press the ENTER button.
This will complete the settings.
You will be returned to the [PROGRAM LIST] screen.
NOTE:
• Up to 30 different timer settings can be programmed.
• The Program Timer is executed on a set time basis, not in a program basis.
• Once the program not marked with a check in [REPEAT] has been executed, the check mark in the [ACTIVE] check box will be
cleared automatically and the program will be disabled.
• When the on-time and the...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-116.png "Page 117
03
6. Using On-Screen Menu
4. Select [OK] and press the ENTER button.
This will complete the settings.
You will be returned to the [PROGRAM LIST] screen.
NOTE:
• Up to 30 different timer settings can be programmed.
• The Program Timer is executed on a set time basis, not in a program basis.
• Once the program not marked with a check in [REPEAT] has been executed, the check mark in the [ACTIVE] check box will be
cleared automatically and the program will be disabled.
• When the on-time and the...")
03 6. Using On-Screen Menu 4. Select [OK] and press the ENTER button. This will complete the settings. You will be returned to the [PROGRAM LIST] screen. NOTE: • Up to 30 different timer settings can be programmed. • The Program Timer is executed on a set time basis, not in a program basis. • Once the program not marked with a check in [REPEAT] has been executed, the check mark in the [ACTIVE] check box will be cleared automatically and the program will be disabled. • When the on-time and the...
Page 118
![Page 118
04
6. Using On-Screen Menu
Deleting the programs
1. On the [PROGRAM LIST] screen, select a program number you want to delete and press the SELECT
button.
2. Press the SELECT button to select [DELETE].
3. Press the ENTER button.
The confirmation screen will be displayed.
4. Select [YES] and press the ENTER button.
The program will be deleted.
This will complete deleting the program.
Using [CORNERSTONE]
(→ page 40)
Using [ENTRY LIST]
(→ page 86)
Setting the Current Date and...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-117.png "Page 118
04
6. Using On-Screen Menu
Deleting the programs
1. On the [PROGRAM LIST] screen, select a program number you want to delete and press the SELECT
button.
2. Press the SELECT button to select [DELETE].
3. Press the ENTER button.
The confirmation screen will be displayed.
4. Select [YES] and press the ENTER button.
The program will be deleted.
This will complete deleting the program.
Using [CORNERSTONE]
(→ page 40)
Using [ENTRY LIST]
(→ page 86)
Setting the Current Date and...")
04 6. Using On-Screen Menu Deleting the programs 1. On the [PROGRAM LIST] screen, select a program number you want to delete and press the SELECT button. 2. Press the SELECT button to select [DELETE]. 3. Press the ENTER button. The confirmation screen will be displayed. 4. Select [YES] and press the ENTER button. The program will be deleted. This will complete deleting the program. Using [CORNERSTONE] (→ page 40) Using [ENTRY LIST] (→ page 86) Setting the Current Date and...
Page 119
![Page 119
05
6. Using On-Screen Menu
Logging Off Your Projector [LOGOFF]
This feature allows you to log off your projector without turning it off.
Logging off your projector will prevent an unauthorized user from operating your projector.
To log off your projector, follow the steps below.
1. Press the MENU button and use the SELECT button to highlight [SETUP].
2. Use the SELECT or the ENTER button to highlight [BASIC].
3. Use the SELECT button to highlight [LOGOFF], and press the ENTER button....](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-118.png "Page 119
05
6. Using On-Screen Menu
Logging Off Your Projector [LOGOFF]
This feature allows you to log off your projector without turning it off.
Logging off your projector will prevent an unauthorized user from operating your projector.
To log off your projector, follow the steps below.
1. Press the MENU button and use the SELECT button to highlight [SETUP].
2. Use the SELECT or the ENTER button to highlight [BASIC].
3. Use the SELECT button to highlight [LOGOFF], and press the ENTER button....")
05 6. Using On-Screen Menu Logging Off Your Projector [LOGOFF] This feature allows you to log off your projector without turning it off. Logging off your projector will prevent an unauthorized user from operating your projector. To log off your projector, follow the steps below. 1. Press the MENU button and use the SELECT button to highlight [SETUP]. 2. Use the SELECT or the ENTER button to highlight [BASIC]. 3. Use the SELECT button to highlight [LOGOFF], and press the ENTER button....
Page 120
![Page 120
0
6. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: color and monochrome.
Turning On / Off Source Display, Message and Time [SOURCE DISPLAY], [MESSAGE DISPLAY],
[TIME DISPLAY], [ID DISPLAY]
SOURCE.DISPLAY.........
This.option. turns.on.or.off. input. name. display. such.as.Computer. 1,.Computer. 2,.Computer. 3,.Compo-
nent,.Video,.and.No.Input.to.be.displayed.on.the.top.right.of.the.screen....](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-119.png "Page 120
0
6. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: color and monochrome.
Turning On / Off Source Display, Message and Time [SOURCE DISPLAY], [MESSAGE DISPLAY],
[TIME DISPLAY], [ID DISPLAY]
SOURCE.DISPLAY.........
This.option. turns.on.or.off. input. name. display. such.as.Computer. 1,.Computer. 2,.Computer. 3,.Compo-
nent,.Video,.and.No.Input.to.be.displayed.on.the.top.right.of.the.screen....")
0 6. Using On-Screen Menu [MENU] Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: color and monochrome. Turning On / Off Source Display, Message and Time [SOURCE DISPLAY], [MESSAGE DISPLAY], [TIME DISPLAY], [ID DISPLAY] SOURCE.DISPLAY......... This.option. turns.on.or.off. input. name. display. such.as.Computer. 1,.Computer. 2,.Computer. 3,.Compo- nent,.Video,.and.No.Input.to.be.displayed.on.the.top.right.of.the.screen....