NEC Np1250 Lcd Projector Users Manual


5. Using the Viewer
 Projecting data from media server (Viewer)
Preparation
For projector: Connect the projector to the network.
For  computer:  Prepare  image  files  or  movie  files  to  be  projected,  and  set  up  “Media  Sharing”  in  Windows  Media 
Player 11.
NOTE: 
• Both the projector and the media server must be on the same subnet. Connecting to the media server beyond the subnet is not 
possible.
• Types of images and movies which can be shared may vary depending on Windows...

8
5. Using the Viewer
3. Select “Share my media” check box, and then select OK. 
 
  A list of accessible devices will be displayed.
4. Select “NP3250 Series” and then “Allow”.
 
  A check mark will be added to the “NP3250 Series” icon.
• The “NP3250 Series” is a projector name specified in [NETWORK SETTINGS]. 
5. Select “OK”.
 
  This will make pictures and video in “Library” available from the projector. 

9
5. Using the Viewer
Connecting the projector to the media server
Press the VIEWER button on the remote control.
The VIEWER will start.
• Another way to start the VIEWER is to press the SOURCE button a few times on the projector cabinet. (→ page 
25)
• This  will  start  searching  for  a  computer  with  “media  sharing”  enabled  in  the  network  and  add  it  to  the  “Media 
server” of the thumbnail screen.
 Another way to do this is to point the cursor to “Media server” and select [REFRESH]...

80
 Using the Menus
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
 
NOTE: The commands such as , ENTER, EXIT in the bottom show available buttons for your operation.
2.  Press the SELECT  buttons on the remote control or the projector cabinet to display the submenu.
3.  Press  the  ENTER  button  on  the  remote  control  or  the  projector  cabinet  to  highlight  the  top  item  or  the 
first tab.
4.  Use  the  SELECT   buttons  on  the  remote...

8
6. Using On-Screen Menu
Using ADVANCED menu and BASIC menu
The projector has two menu modes: the ADVANCED menu and the BASIC menu.
ADVANCED.menu...This.is.the. menu. that.contains. all.the. available. menus.and.commands.. Users.with.an.ADMINISTRAOR. or.
ADVANCED.account.can.access.the.ADVANCED.menu.
BASIC.menu...........This.is.the. basic. menu. that.contains. minimum. essentials. of.menus. and.commands.. Users.with.a.BASIC.
account.can.access.the.BASIC.menu.
See page 50 for settings available to...

8
 Menu tree
6. Using On-Screen Menu
Basic  menu  items  are  indicated  by shaded area.
Factor y  default  settings  are  indi-cated by the gray shaded area.Menu	 	Item
SOURCE. .COMPUTER.1,.COMPUTER.2,.COMPUTER.3,.COMPONENT,.VIDEO,.S-VIDEO,.VIEWER,.NETWORK,.ENTRY.LIST
ADJUST.PICTURE.MODE. STANDARD,.PROFESSIONAL
..PRESET. 1.to.7
...DETAIL.SETTINGS.GENERAL. REFERENCE. HIGH-BRIGHT,.PRESENTATION,.VIDEO,.
... .. . .MOVIE,.GRAPHIC,.sRGB,.DICOM.SIM.
. .. .. .GAMMA.CORRECTION.DYNAMIC,.NATURAL, .BLACK...

83
6. Using On-Screen Menu
Menu	 	Item
SETUP.INSTALLATION(1).ORIENTATION. DESKTOP.FRONT,.CEILING.REAR,.DESKTOP.REAR,.CEILING.FRONT
..SCREEN. SCREEN.TYPE:.4:3.SCREEN,.WIDE.SCREEN*¹./.POSITION*²
..GEOMETRIC.CORRECTION.OFF,.1,.2,.3
. .MULTI-SCREEN.COMP... MODE,CONTRAST,BRIGHTNESS
.INSTALLATION(2).NETWORK.SETTINGS. GENERAL:...PROJECTOR.NAME,.WIRED.LAN,.WIRELESS.LAN
. .. .WIRED:...PROFILES,.DHCP,.IP.ADDRESS,.SUBNET.MASK,.GATEWAY,.
... .DNS.CONFIGURATION,.WINS.CONFIGURATION,.RECONNECT
. .....

84
 Menu Elements
Slide bar
Solid triangle
Highlight
Tab
Radio buttonCheck box
Cancel buttonOK button
Menu windows or dialog boxes typically have the following elements:
Highlight.................Indicates.the.selected.menu.or.item..
Solid.triangle..........Indicates.further.choices.are.available..A.highlighted.triangle.indicates.the.item.is.active..
Tab..........................Indicates.a.group.of.features.in.a.dialog.box..Selecting.on.any.tab.brings.its.page.to.the.front....

85
6. Using On-Screen Menu
 Menu Descriptions & Functions [SOURCE]
COMPUTER 1 and 2
Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
NOTE:
• When  the  component  input  signal  is  connected  to  the  COMPUTER  1,  COMPUTER  2  or  COMPUTER  3,  select  [COMPUTER  1], 
[COMPUTER 2] or [COMPUTER 3] respectively.
• An optional component cable (Component V or ADP-CV1E cable) is needed \
for a component signal.
COMPUTER 3 (RGB Digital)
Selects the computer connected...

8
6. Using On-Screen Menu
[ENTRY LIST]
Using the Entry List
When any source adjustments are made, the adjustments are automatically registered in the Entry List. The (adjust-
ment values of) registered signals can be loaded from the Entry List whenever necessary.
However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the 
Entry List, an error message is then displayed and no additional patterns can be registered. You should thus delete...