NEC Np1250 Lcd Projector Users Manual
Here you can view all the pages of manual NEC Np1250 Lcd Projector Users Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
5
4. Convenient Features
2. Press the SELECT or button to select [NETWORK] and press the ENTER button.
In the screen, the [NETWORK] menu is displayed.
3. From the [NETWORK] menu, select [NETWORK PROJECTOR].
The [PROJECTOR NAME/DISPLAY RESOLUTION/PASSWORD/URL] will be displayed.
TIP:
• To change the default password “1234”, select [CHANGE] and press th\
e ENTER button.
The [ENTER PASSWORD] screen will be displayed, Enter a numeric password. The passwor\
d must be eight characters or...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-70.png "Page 71
5
4. Convenient Features
2. Press the SELECT or button to select [NETWORK] and press the ENTER button.
In the screen, the [NETWORK] menu is displayed.
3. From the [NETWORK] menu, select [NETWORK PROJECTOR].
The [PROJECTOR NAME/DISPLAY RESOLUTION/PASSWORD/URL] will be displayed.
TIP:
• To change the default password “1234”, select [CHANGE] and press th\
e ENTER button.
The [ENTER PASSWORD] screen will be displayed, Enter a numeric password. The passwor\
d must be eight characters or...")
5 4. Convenient Features 2. Press the SELECT or button to select [NETWORK] and press the ENTER button. In the screen, the [NETWORK] menu is displayed. 3. From the [NETWORK] menu, select [NETWORK PROJECTOR]. The [PROJECTOR NAME/DISPLAY RESOLUTION/PASSWORD/URL] will be displayed. TIP: • To change the default password “1234”, select [CHANGE] and press th\ e ENTER button. The [ENTER PASSWORD] screen will be displayed, Enter a numeric password. The passwor\ d must be eight characters or...
Page 72
![Page 72
58
4. Convenient Features
4. Operate [Resolution] slide bar to change the resolution to the resolution displayed on [DISPLAY RESO-
LUTION] in the NETWORK PROJECTOR screen.
5. Click [OK].
The message “Do you keep this screen setting?” is displayed.
6. Click [Yes].
The resolution of Windows Vista screen is changed to the resolution displayed on [DISPLAY RESOLUTION] in
the NETWORK PROJECTOR screen.
Projecting the Image with Network Projector
1. Click [Start] from the desktop of Windows Vista.
2....](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-71.png "Page 72
58
4. Convenient Features
4. Operate [Resolution] slide bar to change the resolution to the resolution displayed on [DISPLAY RESO-
LUTION] in the NETWORK PROJECTOR screen.
5. Click [OK].
The message “Do you keep this screen setting?” is displayed.
6. Click [Yes].
The resolution of Windows Vista screen is changed to the resolution displayed on [DISPLAY RESOLUTION] in
the NETWORK PROJECTOR screen.
Projecting the Image with Network Projector
1. Click [Start] from the desktop of Windows Vista.
2....")
58 4. Convenient Features 4. Operate [Resolution] slide bar to change the resolution to the resolution displayed on [DISPLAY RESO- LUTION] in the NETWORK PROJECTOR screen. 5. Click [OK]. The message “Do you keep this screen setting?” is displayed. 6. Click [Yes]. The resolution of Windows Vista screen is changed to the resolution displayed on [DISPLAY RESOLUTION] in the NETWORK PROJECTOR screen. Projecting the Image with Network Projector 1. Click [Start] from the desktop of Windows Vista. 2....
Page 73
![Page 73
59
4. Convenient Features
7. Check the password displayed in the screen projected by the projector.
8. Input the password to the password input box displayed by the operation at step 3 on page 57.
9. Click [Connect].
The network projector function works and the screen of Windows Vista is projected from the projector.
• On Windows Vista Service Pack 1(SP1), if the resolution of Windows Vista screen is different from the projec-
tor’s screen resolution, changing the resolution of Windows...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-72.png "Page 73
59
4. Convenient Features
7. Check the password displayed in the screen projected by the projector.
8. Input the password to the password input box displayed by the operation at step 3 on page 57.
9. Click [Connect].
The network projector function works and the screen of Windows Vista is projected from the projector.
• On Windows Vista Service Pack 1(SP1), if the resolution of Windows Vista screen is different from the projec-
tor’s screen resolution, changing the resolution of Windows...")
59 4. Convenient Features 7. Check the password displayed in the screen projected by the projector. 8. Input the password to the password input box displayed by the operation at step 3 on page 57. 9. Click [Connect]. The network projector function works and the screen of Windows Vista is projected from the projector. • On Windows Vista Service Pack 1(SP1), if the resolution of Windows Vista screen is different from the projec- tor’s screen resolution, changing the resolution of Windows...
Page 74
![Page 74
0
4. Convenient Features
N Using the Projector to Operate Your Computer via a Network
[REMOTE DESKTOP]
• By selecting the PC connected to the same network as that of the projector, the PC screen image can be pro-
jected to the screen via network.
Then, by operating the keyboard, you can operate Windows Vista on the PC connected with the network.
• With the Remote Desktop function, you can remotely operate the PC placed at a distance from the projector.
Meeting room
Office...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-73.png "Page 74
0
4. Convenient Features
N Using the Projector to Operate Your Computer via a Network
[REMOTE DESKTOP]
• By selecting the PC connected to the same network as that of the projector, the PC screen image can be pro-
jected to the screen via network.
Then, by operating the keyboard, you can operate Windows Vista on the PC connected with the network.
• With the Remote Desktop function, you can remotely operate the PC placed at a distance from the projector.
Meeting room
Office...")
0 4. Convenient Features N Using the Projector to Operate Your Computer via a Network [REMOTE DESKTOP] • By selecting the PC connected to the same network as that of the projector, the PC screen image can be pro- jected to the screen via network. Then, by operating the keyboard, you can operate Windows Vista on the PC connected with the network. • With the Remote Desktop function, you can remotely operate the PC placed at a distance from the projector. Meeting room Office...
Page 75
![Page 75
4. Convenient Features
Setting the password to the user account of Windows Vista
TIP: If a password has been set for an account, the steps 1 to 9 can be skip\
ped.
1. Click [Start] from the desktop of Windows Vista.
2. Click [Control Panel].
3. Click [Add or remove user accounts] displayed under [User Accounts].
4. When the [User Account Control] confirmation window appears, click [Continue].
5. Click [Administrator].
6. Click [Create a password].
7. Input the password to the [New...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-74.png "Page 75
4. Convenient Features
Setting the password to the user account of Windows Vista
TIP: If a password has been set for an account, the steps 1 to 9 can be skip\
ped.
1. Click [Start] from the desktop of Windows Vista.
2. Click [Control Panel].
3. Click [Add or remove user accounts] displayed under [User Accounts].
4. When the [User Account Control] confirmation window appears, click [Continue].
5. Click [Administrator].
6. Click [Create a password].
7. Input the password to the [New...")
4. Convenient Features Setting the password to the user account of Windows Vista TIP: If a password has been set for an account, the steps 1 to 9 can be skip\ ped. 1. Click [Start] from the desktop of Windows Vista. 2. Click [Control Panel]. 3. Click [Add or remove user accounts] displayed under [User Accounts]. 4. When the [User Account Control] confirmation window appears, click [Continue]. 5. Click [Administrator]. 6. Click [Create a password]. 7. Input the password to the [New...
Page 76
![Page 76
4. Convenient Features
4. Click [View status] displayed in blue on the right of [Local Area Connection] in the window.
The [Local Area Connection Status] window appears.
5. Click [Details...].
Write down the value for “IPv4 IP Address” (xxx.xxx.xxx.xxx) displayed.
6. Click [Close].
7. Click [X] at the upper right of the window.
The system goes back to the desktop.
Starting the Remote Desktop
1. With the projector turned on, press the SOURCE button.
The input selection window...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-75.png "Page 76
4. Convenient Features
4. Click [View status] displayed in blue on the right of [Local Area Connection] in the window.
The [Local Area Connection Status] window appears.
5. Click [Details...].
Write down the value for “IPv4 IP Address” (xxx.xxx.xxx.xxx) displayed.
6. Click [Close].
7. Click [X] at the upper right of the window.
The system goes back to the desktop.
Starting the Remote Desktop
1. With the projector turned on, press the SOURCE button.
The input selection window...")
4. Convenient Features 4. Click [View status] displayed in blue on the right of [Local Area Connection] in the window. The [Local Area Connection Status] window appears. 5. Click [Details...]. Write down the value for “IPv4 IP Address” (xxx.xxx.xxx.xxx) displayed. 6. Click [Close]. 7. Click [X] at the upper right of the window. The system goes back to the desktop. Starting the Remote Desktop 1. With the projector turned on, press the SOURCE button. The input selection window...
Page 77
![Page 77
3
4. Convenient Features
2. Press the SELECT or button to select [NETWORK] and press the ENTER button.
The [NETWORK] menu will be displayed.
3. From the [NETWORK] menu, use the wireless keyboard to select [REMOTE DESKTOP CONNECTION].
The [REMOTE DESKTOP CONNECTION] window appears.
TIP:
Setting [OPTIONS] in REMOTE DESKTOP
Clicking [OPTIONS] displays the [PERFORMANCE] screen.
Making settings to [OPTIONS] will allow you to display the desktop background, or to enable the...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-76.png "Page 77
3
4. Convenient Features
2. Press the SELECT or button to select [NETWORK] and press the ENTER button.
The [NETWORK] menu will be displayed.
3. From the [NETWORK] menu, use the wireless keyboard to select [REMOTE DESKTOP CONNECTION].
The [REMOTE DESKTOP CONNECTION] window appears.
TIP:
Setting [OPTIONS] in REMOTE DESKTOP
Clicking [OPTIONS] displays the [PERFORMANCE] screen.
Making settings to [OPTIONS] will allow you to display the desktop background, or to enable the...")
3 4. Convenient Features 2. Press the SELECT or button to select [NETWORK] and press the ENTER button. The [NETWORK] menu will be displayed. 3. From the [NETWORK] menu, use the wireless keyboard to select [REMOTE DESKTOP CONNECTION]. The [REMOTE DESKTOP CONNECTION] window appears. TIP: Setting [OPTIONS] in REMOTE DESKTOP Clicking [OPTIONS] displays the [PERFORMANCE] screen. Making settings to [OPTIONS] will allow you to display the desktop background, or to enable the...
Page 78
![Page 78
4
4. Convenient Features
Exiting the Remote Desktop
1. Operate the wireless keyboard to click [Start] from the desktop screen projected by the projector.
2. Click [X] on the right of the start menu.
The remote desktop function is stopped.
3. Press the SOURCE button of the projector to select an input terminal other than [NETWORK].
When using the remote control, press a button other than the NETWORK button.](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-77.png "Page 78
4
4. Convenient Features
Exiting the Remote Desktop
1. Operate the wireless keyboard to click [Start] from the desktop screen projected by the projector.
2. Click [X] on the right of the start menu.
The remote desktop function is stopped.
3. Press the SOURCE button of the projector to select an input terminal other than [NETWORK].
When using the remote control, press a button other than the NETWORK button.")
4 4. Convenient Features Exiting the Remote Desktop 1. Operate the wireless keyboard to click [Start] from the desktop screen projected by the projector. 2. Click [X] on the right of the start menu. The remote desktop function is stopped. 3. Press the SOURCE button of the projector to select an input terminal other than [NETWORK]. When using the remote control, press a button other than the NETWORK button.
Page 79
5 5. Using the Viewer Making the Most out of the Viewer Function Features The Viewer feature allows you to view slides or movie files stored on a USB memory on the projector, or a shared folder in a computer connected to the network. The VIEWER has the following features. • Five graphic formats are supported: JPEG, BMP, PNG, GIF, and Index*¹ *¹: Index is a file format created using ArcSoft MediaImpression or Viewer PPT Converter 3.0 contained on the attached NEC User...
Page 80
![Page 80
5. Using the Viewer
Supported movie files
Compress/expand methodFile name extension
MPEG2 MP@ML.mpg
Windows Media Video 9.wmv
NOTE:
• A movie file with display size greater than 720 × 576 pixels (widt\
h × height) cannot be played back.
• Movie files converted by using the video/audio format which is not sup\
ported by this projector cannot be played back.
In this case, there will be no icon to show that playback is not possibl\
e.
• Movie files with Linear PCM, AC-3, WMA Pro, or WMA...](http://img.usermanuals.tech/thumb/54/92152/w300_nec-np1250-manual_d-79.png "Page 80
5. Using the Viewer
Supported movie files
Compress/expand methodFile name extension
MPEG2 MP@ML.mpg
Windows Media Video 9.wmv
NOTE:
• A movie file with display size greater than 720 × 576 pixels (widt\
h × height) cannot be played back.
• Movie files converted by using the video/audio format which is not sup\
ported by this projector cannot be played back.
In this case, there will be no icon to show that playback is not possibl\
e.
• Movie files with Linear PCM, AC-3, WMA Pro, or WMA...")
5. Using the Viewer Supported movie files Compress/expand methodFile name extension MPEG2 [email protected] Windows Media Video 9.wmv NOTE: • A movie file with display size greater than 720 × 576 pixels (widt\ h × height) cannot be played back. • Movie files converted by using the video/audio format which is not sup\ ported by this projector cannot be played back. In this case, there will be no icon to show that playback is not possibl\ e. • Movie files with Linear PCM, AC-3, WMA Pro, or WMA...