Home > NEC > Communications System > NEC Neax 2400 Ipx Wireless System Manual

NEC Neax 2400 Ipx Wireless System Manual

Here you can view all the pages of manual NEC Neax 2400 Ipx Wireless System Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 31

CHAPTER 1 NDA-24301
Page 14
Revision 1.0
GENERAL DESCRIPTION
Table 1-3  List of OG Call Features
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From PS To PS From PS To PS
ALTERNATE ROUTING/ROUTE 
ADVANCE×–––
SPEED CALLING-STATION/
GROUP––––To be substituted for the memory 
dial of PS
SPEED CALLING-SYSTEM××××
Note 1
SPEED CALLING OVERRIDE-
SYSTEM××××Note 1
TOLL CALL RESTRICTION×–––
PUSH-BUTTON TO ROTARY 
CONVERSION––––
PRIMARY CODE...

Page 32

NDA-24301 CHAPTER 1
Page 15
Revision 1.0
GENERAL DESCRIPTION
Note 1:
OG call using [S-3] SPEED CALLING-SYSTEM/[S-61] SPEED CALLING OVERRIDE-SYSTEM can
be placed from PS terminal since Series 7400 Release 9 software. 
For more details, see SPEED CALLING-SYSTEM [S-135] in Chapter 4.
Note 2:When a  PS is assigned as the target station of DIRECT IN TERMINATION (DIT).
1) When the PS is Out of Zone (Out of Zone or in a state of POWER OFF), RBT is heard by the calling
party.
If AUTOMATIC ANNOUNCEMENT-PS OUT...

Page 33

CHAPTER 1 NDA-24301
Page 16
Revision 1.0
GENERAL DESCRIPTION
Table 1-5  List of Station Service Features 
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From PS To PS From PS To PS
OFF HOOK ALARM––––
8-PARTY CONFERENCE––––
C.F.-A-OUTSIDE××××
Note 1 
C.F.-D-OUTSIDE××××
C.F.-B-OUTSIDE××××
C.F.-A××××
Note 6
C.F.-A CANCEL BY A ROUTINE 
DIAGNOSIS––––
C.F.-I’M HERE××××
Note 7
CALL TRANSFER - ALL CALLS××××Note 2
EMERGENCY CALL––––
DAY/NIGHT...

Page 34

NDA-24301 CHAPTER 1
Page 17
Revision 1.0
GENERAL DESCRIPTION
Note 1:
C.F.-D-Outside is not applicable by way of CALL TRANSFER-ALL CALLS.
Note 2:Recall service can be activated to the transferred station when the PS, with C.F.-PS INCOMING CALL
INCOMPLETE in service, moves Out of Zone, after placing a call on hold.
Note 3:Call Waiting
1) This service is valid in the two party call when a call is terminated – from station-to-station, to PS, to
Central Office line, or to Tie line call – but invalid when...

Page 35

CHAPTER 1 NDA-24301
Page 18
Revision 1.0
GENERAL DESCRIPTION
Note 1:
1) Call Park is available when:
operating party is the PS in Home PBX
held party is the PS in Home PBX
2) Call Park is not available when:
When Visitor PS originates a call to a station/PS in Visitor PBX(two-party connection), the call
cannot be parked from the called party.
the operating party is PS in Visitor PBX.
Note 2:Available since Series 7300 Release 5 software.
Table 1-6  List of Other Service Features
×: Available :...

Page 36

NDA-24301 CHAPTER 1
Page 19
Revision 1.0
GENERAL DESCRIPTION
Table 1-7  List of Attendant Console Service Features
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From PS To PS From PS To PS
AUTOMATIC RECALL–×–×
ATTENDANT LOOP RELEASE––––
CALL TRANSFER-ATTENDANT–×–×
Note 1
SUPERVISORY CALL–×–×
DIGITAL DISPLAY-TRUNK––––
CALL PROCESSING 
INDICATION××××
SERIAL CALL––––
CALL WAITING LAMP DISPLAY×–×–
ATTENDANT CAMP-ON––––
NON-DELAY...

Page 37

CHAPTER 1 NDA-24301
Page 20
Revision 1.0
Note 1:Upon receiving an incoming call, the Attendant Console transfers the call to a PS, then it ends up with the
PS connected to the outside.
If, in this situation, the PS user moves to a place Out of Zone, the caller from the outside line will hear BT.
Note 2:While the Attendant Console is calling a PS, the services associated with Out of Zone such as C.F.-PS
INCOMING INCOMPLETE, AUTOMATIC ANNOUNCEMENT-PS OUT OF ZONE and AUTOMATIC
ANNOUNCEMENT-DISCONNECTED PS...

Page 38

NDA-24301 CHAPTER 1
Page 21
Revision 1.0
GENERAL DESCRIPTION
Note 1:
This service feature has the limitation for the Fusion Link Network. Refer to the Fusion Network System
Manual.
Table 1-8  List of Network Service Features
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From 
PSTo PS From PS To PS
AUTOMATIC CIRCUIT 
ASSURANCE×–×–
CENTREX COMPATIBILITY–×–×
DELUXE TRAVEL CLASS MARK–– – –
LCR - AUTOMATIC OVERFLOW×–×–
LCR-3/6-DIGIT×–×–
Note...

Page 39

CHAPTER 1 NDA-24301
Page 22
Revision 1.0
GENERAL DESCRIPTION
Note 1:
Automatic Announcement - PS Out of Zone/C.F. PS Incoming Incomplete may not be available. It depends
on Public ISDN Network.
Note 2:The ISDN terminal cannot transfer the call to a PS or provide the 3-party conference feature including a
PS.
Note 3:A PS can transfer the call to ISDN terminal and provide the 3-party conference feature including the ISDN
terminal.
Table 1-10  List of ISDN Service Features
×: Available : Conditionally...

Page 40

NDA-24301 CHAPTER 1
Page 23
Revision 1.0
GENERAL DESCRIPTION
Table 1-11  List of CCIS Features 
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESORIGINATED 
FROM PSTERMINATED
TO PSREMARKS
Attendant Controlled Conference - 
CCIS–×
Automatic Recall - CCIS×–
Brokerage Hotline - CCIS–×
Call Forwarding - All Calls - CCIS××
Call Forwarding - Busy Line - CCIS××
Call Forwarding - Don’t Answer - 
CCIS××
Call Transfer - All Calls - CCIS××
Calling/Called Number Display -...
Start reading NEC Neax 2400 Ipx Wireless System Manual

Related Manuals for NEC Neax 2400 Ipx Wireless System Manual

All NEC manuals