Home > NEC > Communications System > NEC Neax 2400 Imx Hotel Office Data Specification

NEC Neax 2400 Imx Hotel Office Data Specification

Here you can view all the pages of manual NEC Neax 2400 Imx Hotel Office Data Specification. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 141

NDA-24288 CHAPTER 4
Page 129
Revision 1.0
AGSP
AGSP: Assignment of Guest Special Access Code
1. General
This command determines the Kind of Service to be executed or the route to be used when a Special Access
code or trunk Access code has been dialed for the Guest Station. 
2. Precautions
1. This command is used for the Hotel Application only.
2. If the Guest and Admin. Numbering are separated (the ASYD command, SYS1, INDEX 160, bit6=0), use
this command for the Guest Special Access code. For the Admin....

Page 142

CHAPTER 4 NDA-24288
Page 130
Revision 1.0
AGSP
3. Data Entry Instructions
 
Access code (Max. 6 digits)
15 (Speed Calling-System;
     Access)
63 (Call Park ; Retrieve) NND appears when the following SID is entered.
NND data is variable depending on SID.NND1 appears when SID = 15. The number of ADC
(Abbreviation Digit Code) digits should be assigned in NND1. TENANT
NUMBER
(TN)ACCESS CODE
(ACC)
MAX. 6 DIGITSCONNECTION 
STATUS INDEX
(CI) N/H/BKIND OF
SERVICE (SRV)
ACC
CISRV
NND1
SERVICE INDEX
(SID)...

Page 143

NDA-24288 CHAPTER 4
Page 131
Revision 1.0
AGSP
         STATE
(Hotel Service Code)
  1 To be cleaned without ID code
  2  Cleaning Completed without ID code
  3 Ready for Occupancy without ID code
  4 Use Not Allowed without ID code
5-  8-
  9 Maid Dial Answer Back without ID code-1
10 Maid Dial Answer Back without ID code-2
11 Maid Dial Answer Back without ID code-3
12 Maid Dial Answer Back without ID code-4
13 Maid Dial Answer Back without ID code-5
14 Maid Dial Answer Back without ID code-6
15 Maid...

Page 144

CHAPTER 4 NDA-24288
Page 132
Revision 1.0
AGSP
SERVICE INDEX
    (SID) 1-63      NO.1
56
NO.1
(Kind of Assignment Number)
  Available numbers are 0-15.
  This data is used to assign Floor Service data by the ASPF command.
Note: When programming Floor Service data,
 ASYD SYS1 INDEX 165, bit7=1 must have been assigned.
SERVICE INDEX
    (SID) 1-63NO.2KIND
57
NO.2
This parameter specifies the number (0-63) of the
access code being assigned for mutual Access.
This parameter serves as a counter for the...

Page 145

NDA-24288 CHAPTER 4
Page 133
Revision 1.0
AGSP
SERVICE INDEX A (SIDA) 1-255PNO 1-15A/G
56
PNO
This parameter specifies the Admin./Guest
Numbering Parameter Classification.
After assigning the PNO, go to the AOSP
command to skip this ACC.
After skipping the access code, the system
refers to the numbering data designated in
the next parameter A/G.A/G
Numbering table designation for redevelopment
A: Admin.
G: Guest
When SRV = SSCA (Service code appendix), SIDA 56 (Guest/Admin. Service) is assigned 

Page 146

CHAPTER 4 NDA-24288
Page 134
Revision 1.0
AGSP
Assign the number of advanced trunk routes.ROUTE NUMBER
(RT)
COUNT
Assign a dummy route number.RT
Second dial tone sending (which is sent when a station has
dialed the digits specified in NND of the AGNP command)
0 = Second DT is not send
1 = Second DT is sent2nd DTAuthorization code after dialing
ACC (LCR)+Destination number
0 = Out of Service
1 = In ServiceAH
ISDN-Sub Address Dialing
0 = Out of Service
1 = In ServiceSUB ROUTE NUMBER
(RT)SECOND DIAL TONE...

Page 147

NDA-24288 CHAPTER 4
Page 135
Revision 1.0
AGSP
Assign the skip digits to terminate the call.
Assign the announce equipment number.
EQP3 and 5-14 can be used for SRV = ANNC (Single announcement).SKIP DIGITS
(SKIP) 0-5 When SRV = UNIF (Office termination) is assigned
When SRV = ANNC (Announcement service-Single announcement) is assigned
SKIP
ANNOUNCEMENT EQUIPMENT NUMBER
(EQP) 0-127
EQP
Note:This data is available for ACIS only. For CCIS, use the AUNE command.
Assign the tenant number of
the announcement...

Page 148

CHAPTER 4 NDA-24288
Page 136
Revision 1.0
AGSP
4. Data Sheet
(a) Service Code (SRV = SSC)
TENANT 
NUMBER
(TN)ACCESS CODE
(ACC)
MAXIMUM
6 DIGITSCONNECTION 
STATUS 
INDEX
(CI) 
N/H/BKIND OF
SERVICE 
(SRV)SERVICE
INDEX
(SID)
1 – 63NUMBER OF 
NECESSARY
DIGITS 
(NND)NUMBER OF 
NECESSARY
DIGIT FOR 
SPEED 
CALLING
(NND1)
1 – 24SERVICE CONTENTS
H Hooking SSC 1Not used
NNormal
SSC 2
Dial Access to Attendant 
(Information Service Call)
H Hooking
3Not used
4
NNormal
SSC 5
Call Waiting-Originating
BBusy
6
13
Not...

Page 149

NDA-24288 CHAPTER 4
Page 137
Revision 1.0
AGSP
(a) Service Code (SRV = SSC) (Continued)
TENANT 
NUMBER 
(TN)ACCESS CODE
(ACC)
MAXIMUM
6 DIGITSCONNECTION 
STATUS INDEX 
(CI) 
N/H/BKIND OF 
SERVICE 
(SRV)SERVICE 
INDEX
(SID)MAID
STATUS 
(STATE)
1 – 63SERVICE CONTENTS
N Normal SSC 361 To be cleaned without ID Code
2 Cleaned without ID Code
3Ready for Occupancy without ID 
Code
4 Use Not Allowed without ID Code
5
8Not used
9Maid Dial Answer Back without ID 
Code 1
10Maid Dial Answer Back without ID 
Code 2...

Page 150

CHAPTER 4 NDA-24288
Page 138
Revision 1.0
AGSP
(a) Service Code (SRV = SSC) (Continued)
TENANT 
NUMBER 
(TN)ACCESS CODE
(ACC)
MAXIMUM
6 DIGITSCONNECTION 
STATUS INDEX
(CI) 
N/H/BKIND OF 
SERVICE
(SRV)SERVICE 
INDEX
(SID)MAID
STATUS 
(STATE)
1 – 63SERVICE CONTENTS
N Normal SSC 3621
24Not used
25Maid Dial Answer Back with ID 
Code 1
26Maid Dial Answer Back with ID 
Code 2
27Maid Dial Answer Back with ID 
Code 3
28Maid Dial Answer Back with ID 
Code 4
29Maid Dial Answer Back with ID 
Code 5
30Maid Dial...
Start reading NEC Neax 2400 Imx Hotel Office Data Specification

Related Manuals for NEC Neax 2400 Imx Hotel Office Data Specification

All NEC manuals