NEC Neax 2400 Imx Hotel Office Data Specification

NDA-24288 CHAPTER 4
Page 179
Revision 1.0
AGSPL
(j) Telephone Number (SRV = TELN)
 
TENANT
NUMBER 
(TN)ACCESS CODE 
(ACC)
MAXIMUM
6 DIGITSCONNECTION
STATUS INDEX
(CI) 
N/HKIND OF
SERVICE 
(SRV)NUMBER OF 
NECESSARY 
DIGITS
(NND) 
1-24REMARKS
NNormal
TELN
H Hooking
NNormal
TELN
H Hooking
NNormal
TELN
H Hooking
NNormal
TELN
H Hooking
NNormal
TELN
H Hooking
NNormal
TELN
H Hooking
NNormal
TELN
H Hooking
NNormal
TELN
H Hooking
NNormal
TELN
H Hooking
NNormal
TELN
H Hooking
NNormal
TELN
H Hooking
NNormal
TELN
H...

CHAPTER 4 NDA-24288
Page 180
Revision 1.0
AGSPN
AGSPN: Assignment of Guest Special Access Code for NDM
1. General
This command assigns the numbering plan data for the Network Control Node (NCN). The data assigned in this
command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the
NDM at each Local Node (LN). 
2. Precautions
1. This command is used for the Hotel Application only.
2. If the Guest and Admin. Numbering are separated (the ASYD command, SYS1, INDEX 160,...

NDA-24288 CHAPTER 4
Page 181
Revision 1.0
AGSPN
3 . Data Entry Instructions
Access code (Max. 6 digits)TENANT
NUMBER
(TN)ACCESS CODE
(ACC)
MAX. 6 DIGITSCONNECTION 
STATUS INDEX
(CI) N/H/BKIND OF
SERVICE 
(SRV)
ACC
CISRV
SSCA=Service code appendix
OGCA=Outgoing call with route advance  
LCR=Least cost routing N=Normal service
H=Hooking service
B=Busy serviceSSC=Service code
OGC=Outgoing call
UNIF=Office termination
ANNC=Announcement service-single announcement
ANNCM=Announcement service-multiple...

CHAPTER 4 NDA-24288
Page 182
Revision 1.0
AGSPN
         STATE
(Hotel Service Code)
  1    To be cleaned without ID code
  2    Cleaning Completed without ID code
  3    Ready for Occupancy without ID code
  4    Use Not Allowed without ID code
5-8    -
  9    Maid Dial Answer Back without ID code-1
10    Maid Dial Answer Back without ID code-2
11    Maid Dial Answer Back without ID code-3
12    Maid Dial Answer Back without ID code-4
13    Maid Dial Answer Back without ID code-5
14    Maid Dial Answer...

NDA-24288 CHAPTER 4
Page 183
Revision 1.0
AGSPN
SERVICE INDEX
    (SID) 1-63      NO.1
56
NO.1
(Kind of Assignment Number)
  Available numbers are 0-15.
  This data is used to assign “Floor Service” data by the ASPF command.
Note: When programming “Floor Service” data,
 ASYD SYS1 INDEX 165, bit7=1 must have been assigned.
SERVICE INDEX
    (SID) 1-63NO.2KIND
57
NO.2
This parameter specifies the number (0-63) of the
access code being assigned for mutual Access.
This parameter serves as a counter for the...

CHAPTER 4 NDA-24288
Page 184
Revision 1.0
AGSPN
Table 4-1 SIDA (AGSPN)
SIDA SERVICE NAME SIDA SERVICE NAME
1-49–56 Guest/Admin. Service
50 UCD Busy Out; Entry 56-62–
51 UCD Busy Out; Cancel 63 Call Pickup Expand
52-55–64-255–
SERVICE INDEX A (SIDA) 1-255PNO 1-15A/G
56
PNO
This parameter specifies the Admin./Guest
Numbering Parameter Classification.
After assigning the PNO, go to the AOSP
command to skip this ACC.
After skipping the access code, the system
refers to the numbering data designated in
the...

NDA-24288 CHAPTER 4
Page 185
Revision 1.0
AGSPN
LOGICAL ROUTE NUMBER
(LGRT)
Assign a dummy route number.LGRT
Second dial tone sending (which is sent when a station has
dialed the digits specified in NND of the AGNP command)
0=Second DT is not sent
1=Second DT is sent2nd DTAuthorization code after dialing
ACC (LCR)+Destination number
0=Out of Service
1=In ServiceAH
ISDN-Sub Address Dialing
0=Out of Service
1=In ServiceSUB
LOGICAL ROUTE NUMBER
(LGRT)SECOND DIAL TONE
(2nd DT) 0/1AUTHORIZATION CODE
(AH)...

CHAPTER 4 NDA-24288
Page 186
Revision 1.0
AGSPN
Assign the skip digits to terminate the call.
Assign the announce equipment number.
EQP3 and 5-14 can be used for SRV=ANNC (Single announcement).SKIP DIGITS
(SKIP) 0-5 When SRV=UNIF (Office termination) is assigned
When SRV=ANNC (Announcement service-Single announcement) is assigned
SKIP
ANNOUNCEMENT EQUIPMENT NUMBER
(EQP) 0-127
EQP
Note:This data is available for ACIS only. For CCIS, use the AUNE command.
Assign the tenant number of
the announcement trunk....

NDA-24288 CHAPTER 4
Page 187
Revision 1.0
AGSPN
4. Data Sheet
(a) Service Code (SRV = SSC)
TENANT
 NUMBER
(TN)ACCESS
 CODE
(ACC)
MAXIMUM
6 DIGITSCONNECTION 
STATUS
INDEX
(CI) 
N/H/BKIND OF
SERVICE 
(SRV)SERVICE
INDEX
(SID)
1 – 63NUMBER OF
 NECESSARY
DIGITS
(NND)NUMBER OF 
NECESSARY
DIGIT FOR
SPEED
CALLING
(NND1)
1 – 24FUSION
POINT
CODE
FPC)
1-253SERVICE CONTENTS
H Hooking SSC 1Not used
NNormal
SSC 2
Dial Access to Attendant
(Operator Call) H Hooking
3Not used
4
NNormal
SSC 5
Call Waiting-Originating...

CHAPTER 4 NDA-24288
Page 188
Revision 1.0
AGSPN
(a) Service Code (SRV = SSC) (Continued)
SID = 36 (Hotel Service)
TENANT
NUMBER
(TN)ACCESS CODE
(ACC)
MAXIMUM
6 DIGITSCONNECTION
STATUS INDEX
(CI)
N/H/BKIND OF
SERVICE
(SRV)SERVICE
INDEX
(SID)MAID
STATUS
(STATE)
1 – 63SERVICE CONTENTS
N Normal SSC 361 To be cleaned without ID Code
2 Cleaned without ID Code
3Ready for Occupancy without ID 
Code
4 Use Not Allowed without ID Code
5
8Not used
9Maid Dial Answer Back without ID 
Code 1
10Maid Dial Answer Back...