NEC Neax 2400 Imx Ccis Features And Specifications
Have a look at the manual NEC Neax 2400 Imx Ccis Features And Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 204
NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 189
Supervisory Call - CCIS S-73
S-73 Supervisory Call - CCIS
General Description
This feature allows an Attendant, in a CCIS network, to set Supervisory Call status before releasing a Central Office
call to a station. When the call is extended to a station, the loop will remain up until the called station answers. This
overrides ATTENDANT LOOP RELEASE [A-6] on a per call basis.
Operating Procedure
To activate a SUPERVISORY CALL - CCIS...](http://img.usermanuals.tech/thumb/54/84334/w64_nec-neax2400-imx-ccis-features-specifications_d-203.png "Page 204
NEAX2400 IMX CCIS Features and Specifications
NDA-24222, Issue 3
Page 189
Supervisory Call - CCIS S-73
S-73 Supervisory Call - CCIS
General Description
This feature allows an Attendant, in a CCIS network, to set Supervisory Call status before releasing a Central Office
call to a station. When the call is extended to a station, the loop will remain up until the called station answers. This
overrides ATTENDANT LOOP RELEASE [A-6] on a per call basis.
Operating Procedure
To activate a SUPERVISORY CALL - CCIS...")
![Page 207
NEAX2400 IMX CCIS Features and Specifications
Page 192NDA-24222, Issue 3
T-27 Trunk Answer from Any Station - CCIS
Interactions
The system must be in the Night Mode for TAS to operate. Take into consideration the type of ATTENDANT
CONSOLE [A-3] system that is in service. Take special care when setting the resistance value via switch settings
on the PA-CS07 ATTENDANT CONSOLE [A-3] Circuit Card.](http://img.usermanuals.tech/thumb/54/84334/w64_nec-neax2400-imx-ccis-features-specifications_d-206.png "Page 207
NEAX2400 IMX CCIS Features and Specifications
Page 192NDA-24222, Issue 3
T-27 Trunk Answer from Any Station - CCIS
Interactions
The system must be in the Night Mode for TAS to operate. Take into consideration the type of ATTENDANT
CONSOLE [A-3] system that is in service. Take special care when setting the resistance value via switch settings
on the PA-CS07 ATTENDANT CONSOLE [A-3] Circuit Card.")
NEAX2400 IMX CCIS Features and Specifications Page 196NDA-24222, Issue 3 V-7 Voice Call - CCIS Operating Procedure (cont’d) 3. Station (a) dial the Access Code of VOICE CALL service and sends out a signal tone to Dterm (b) via the speaker. Dterm (b) talks with Station (a) via the speaker. Service Conditions 1. Once a VOICE CALL is executed, the message “VOICE on multi-line set” is displayed on the called station. 2. Call Forwarding-All Calls/-Busy Line/-Don’t Answer can be serviced by VOICE CALL. 3. VOICE CALL will terminate at the station whose My-line equals the extension called. NEC STN (a) Dterm (b) [Node B] [Node A]Voice