NEC Neax 2000 Ivs2 Wcs Features And Specifications

							GROUP CALL - 2 WAY CALLING
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
Page 16NDA-24274, Issue 1.0
GROUP CALL - 2 WAY CALLING
General Description
ThisfeaturepermitsaDtermPSII/Dterm/Single Line Telephone can page a maximum of fifteen parties
simultaneously except the group call leader. After one of paged parties answers, the paging becomes the 2 Way
Calling between the leader and the first answered party, and paging other parties stops automatically. The PSs
are assigned to the simultaneous paging groups as a participants by the system data beforehand.
Configuration Application
IVS Wired for Wireless
Operating Procedure
To page stations of a group
From DtermPSII/Dterm/Single Line Telephone;
1. Press the L1 or L2 key or go off hook, and receive a dialtone.
2. Dial the access code or press feature access key (D
termonly) for a desired paging group, and receive a
ringback tone.
OR
From D
termPSII;
1. Dial the accesscode for a desiredpaging group.
2. Press the L1 or L2 key and receive a ringback tone.
If the paged stations are all busy or the leader is not assigned as the conference leader with service feature
class, a reorder tone is heard.
3. Paging stops after one of paged parties answered.
To answer the paging
1. When the paging call terminates, the LCD shows the station number of the groupcall leader.
2. Answer the ringing of paging from the group call leader.
3. Paging stops after one of paged PSs answered.
Service Conditions
1. A maximum of fifteen stations are paged simultaneously except the group call leader.
Even if more than fifteen stations are assigned to one group except the leader, the firstfifteen stations are
paged in order of registered number on the system data. Also one station can belong to plural groups.
2. Single Line Telephones, D
terms, DtermPSIIs can be assigned as the stations within the group call groups
(Virtual line cannot be assigned). A station can belong to plural groups.
3. Up to eight groups can be assigned as the call group by system data, including voice paging and Group Call-
Automatic Conference.
4. A Single Line Telephone, D
term,andDtermPSII can be a group call leader and page a group, even if itdoes
not belong to the group. 
						

							GROUPCALL-2WAYCALLING
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
NDA-24274, Issue 1.0
Page 17
5. A group call leader cannotpage two or more groups simultaneously.
A group cannot be paged simultaneously by the plural group call leaders.
6. If all stations within the paged group are busy, the group call leader hears a reorder tone.
The Group Call leader will continue to hear ringback tone until the page is answered. It does not timeout.
7. A station can be paged while idle state. When the station is busy at the time of paging, the station will not
be paged even if the station returns to idle afterward.
8. Even if a station sets Call Forwarding, the group call leader can page thestation.
9. If a paged D
termPSII is out of zone, its power is off or it is roaming, the system keeps paging by the certain
time. While the paging is in progress, the DtermPSII can be paged when it returns into the zone or when its
power returns to on.
10. During a group call, Handover of D
termPSII is available. 
						

							HANDOVER
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
Page 18NDA-24274, Issue 1.0
HANDOVER
General Description
When the signal transmission quality becomes inferior, a DtermPSII re-originates a call automatically and seizes
another radio channel, making the IVS-WCS handover the call to another zone transceiver to maintain the
speech quality.
Configuration Application
IVS Wired for Wireless and PBX Adjunct
Operating Procedure
No manual operation is required. The DtermPSII sends Handover request to the IVS-WCS automatically.
Service Conditions
1. This feature is activated when a DtermPSII is engaged in communication.
2. The communication may be interrupted during operation of the Handover. The interruption is usually within
a second, to a maximum of ten seconds.
3. This feature is also available when a D
termPSII user moves to the far end of the radio zone and encounters
poor transmission quality. In this case, the DtermPSII searches for the radio zone with stronger electric
signal, and if the radio zone is found, Handover is activated and the conversation is continued in that zone.
If there is no idle channel in the new radio zone, the conversation is continued in the current zone until the
communication becomes unavailable, and then, Automatic Release - Out of Zone Calls is activated.
4. PS Authorization is activated every time this feature is activated. 
						

							INDIVIDUAL PS CALLING
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
NDA-24274, Issue 1.0
Page 19
INDIVIDUAL PS CALLING
General Description
This feature allows the calling party to page the individual DtermPSII.
Configuration Application
IVS Wired for Wireless and PBX Adjunct
Operating Procedure
To activate:
1. Dial the unique number assigned to each DtermPSII. The designated DtermPSII will be called. If the calling
number display is available, the lower 11 digits of the number are displayed on the LCD of the called Dterm
PSII.
2. There are two answering options:
a. L1/L2 answering mode
The called D
termPSIIuserpressesL1orL2keystoanswer.
b. Automatic answering mode
The called D
termPSII is connected automatically after the answer timer programmed in the DtermPSII
has expired. See the DtermPSII Operation Guide.
Service Conditions
1. The DtermPSII will be paged in the paging area where its location has been registered.
2. This feature is available for:
a. calls from a D
termPSII
b. calls from a PBX station (D
term, single line) or Attendant Console
c. Direct Inward Termination (DIT) calls
d. Direct Inward Dialing (DID) calls
e. Direct Inward System Dialing (DISA) calls
f. Tie Line calls.
3. If the D
termPSII cannot be called as the DtermPSII user is out of the service area, the announcement can be
provided to the calling party (The PN-2DAT or PN-4DAT cards are required). If the called DtermPSII is out
of the service area, Out of Zone Indication is activated.
4. When all speech channels of the zone transceiver in the paging area are busy, Announcement - PS Out of
Zone is activated, if allowed in the tenant basis service feature class. If not allowed in the service feature
class, the D
termPSII user receives reorder tone.
5. PS Authorization is activated for every call termination.
6. The answering options, the any-key answering mode, and the automatic answering mode can be selected by
the D
termPSII user, using the FNC key. 
						

							LAST NUMBER REDIAL - PS
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
Page 20NDA-24274, Issue 1.0
LAST NUMBER REDIAL - PS
General Description
This feature enables a DtermPSII to store the numbers dialed in the previous five calls including the last number
dialed. The stack dial numbers are sequentially displayed on the LCD, allowing the station user to make an
outgoing call by selecting the desired dialed number from the display.
Configuration Application
IVS Wired for Wireless and PBX Adjunct
Operating Procedure
To store the number:
Dial the desired number, using either Overlap dialing or Preset Dialing. The number dialed is stored
automatically.
To redial the stored number:
1. Press the LNR softkey. The last number dialed is displayed.
2. Press the∇key to select the desired number.
3. Press the L1 or L2 key to dial the selected number.
Service Conditions
Refer to the DtermPSII User Guide. 
						

							MULTI-LINE OPERATION - PS
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
NDA-24274, Issue 1.0
Page 21
MULTI-LINE OPERATION - PS
General Description
DtermPSII equiped with two line keys, L1 key and L2 key, and different station numbers can be assigned to each
of two lines. The number assigned to L1 key of the PS is called My Line and the other number assigned to L2
key is called Sub Line. My Line and Sub Line of a D
termPSII can be assigned to appear on the Flexible Line
Keys of a Dtermand the Dtermcan share the DtermPSII lines.
Configuration Application
IVS Wired for Wireless and PBX Adjunct
Operating Procedure
Refer to the DtermPSII User Guide.
Service Conditions
1. A Sub Line number of DtermPSII cannot be overlapped with station numbers of My Line/Sub Line of Dterm,
SLT,andMyLineofDtermPSII, but the same Sub Line number of DtermPSII can be assigned to plural
DtermPSIIs.
2. There is no limitation in the number of D
termPSII which can share a Sub Line.
3. Some PBX services are available for My Line as well as for sub-line, but some of the services such as
roaming and “Message Waiting” are not available to sub-line.
4. When a call terminates to a Sub Line, all PSs sharing the Sub Line ring and each L2 key of the PSs lights
for 60 seconds. If one of those PSs originates or holds on the Sub-Line call, each L2 key of other PSs does
not light.
5. While either My Line or Sub Line is in communication, Multiline Hold isavailable by pressing HLD key
and other PSs/D
terms sharing the line can answer by pressing the held line key.
Exclusive Hold is available by pressing HLD key twice and only the PS on Exclusive Hold can answer the
call. Other PSs receive ROT and cannot answer the call.
6. While either Sub Line or My Line is in communication, the D
termPSII user can answer an incoming call
and a call on Multiline Hold, or originate an outgoing call on the other line, by pressing HLD key and the
other line key. If the D
termPSII user answers the second line without pressing HLD key, the first line is
disconnected.
7. Sub Line becomes unavailable while the D
termPSII is roaming or out of zone.
8. Handover on Sub Line is available as well as the My Line.
9. When a call is terminating to a Sub Line which is not set Announcement-PS No Answer/-PS Out of Zone,
paging continues for 60 seconds, then stops. 
						

							MULTI-SITE ROAMING
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
Page 22NDA-24274, Issue 1.0
MULTI-SITE ROAMING
General Description
The DtermPSII user can originate or receive a call in any place of a network if the multiple PBXs are interfaced
by JT-Q931-a.
Configuration Application
IVS Wired for Wireless and PBX Adjunct with CCIS interface
Operating Procedure
No manual operation is required.
Service Conditions
1. A roaming service network can be provided by maximum 512 PBXs.
2. One AP00 card for Data Base Module (DBM) is required per PBX.
3. Visitor Location Register (VLR) information for maximum 512 Visitor PSs can be recorded to a system.
When the VLR information exceeds for more than 512 Visitor PSs, AP00 deletes the oldest VLR
informationinthesystem.
4. When a call terminates to a Multiline Terminal from a PS, the ringing of the Multiline Terminal is as
follows, regardless of Home PS or Visitor PS;
 When the PS is under control of the same PBX: Ringing for Internal call
 When the PS is under control of the other PBX: Ringing for External call
5. When the Home PS is roaming, the Home PBX cannot route Announcement-PS No Answer /-PS Out of
Zone to the calling party. If the Visitor PBX allows to inform the Home PBX that the PS cannot answer, the
Home PBX activates Call Forwarding-Not Available.
6. Billing of Home PS is executed to its Virtual LC Number.
7. While the Home PS is roaming, billing information cannot be recorded.
8. The Visitor PS can allow following service features.
a. Originating a call to a station of the same office
b. Originating a call to a station of the different office
c. Terminating a call from a roaming trunk
d. PS Exclusive Hold
e. Call Forwarding
9. Maximum 64 Visitor PSs can originate or receive a call in a network at the same time.
10. The Visitor PS can answer a call only from the roaming trunk.
11. Billing of Visitor PS is executed to its Virtual LC Number.
12. Billing information for the Visitor PS can be recorded only when the Visitor PS originates a call. 
						

							NEAX2000 IVS2WIRED FOR WIRELESS
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
NDA-24274, Issue 1.0
Page 23
NEAX2000 IVS2WIRED FOR WIRELESS
General Description
This feature allows the NEAX2000 IVS2to include the Wireless PBX. NEAX2000 IVS2integrated features in
addition to the adjunct configurations.
Configuration Application
IVS Wired for Wireless
Operating Procedure
To place a call using Overlap Dialing:
1. Press the L1 or L2 key and receive extension dial tone.
2. Dial the desired number and receive ringback tone.
To place a call using Preset Dialing:
Dial the desired number, then press the L1 or L2 key, and receive ringbacktone.
To place an outside call using Overlap Dialing:
1. Press the L1 or L2 key and receive extension dial tone.
2. Dial the trunk accesscode.
3. Receive outside dial tone.
4. Dial the desired outside number and receive ringback tone.
To place an outside call using Preset Dialing:
Dial the trunk access code and the desired outside number, then press the L1 or L2 key and receive ringback
tone.
To send the DTMF signal:
While engaged in a call, press anydigit key. DTMF signal is automatically sent from the IVS-WCS to the other
party.
* Refer to the description of the feature, DTMF Signal Sender.
To place a call on Consultation Hold:
While engaged in a call, press the HLD key. If the PBX provides the service, the called party hears Music on
Hold. 
						

							NEAX2000 IVS2WIRED FOR WIRELESS
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
Page 24NDA-24274, Issue 1.0
To transfer the call in progress:
1. While connected to the first party, press the TRF key; receive feature dial tone. The number displayed on
the LCD is cleared. If the PBX provides the service, the held party hears Music on Hold.
2. Dial the third party number; receive ringback tone and the number is displayed.
3. Press the END key before the third party answers. The first and third parties will be connected when the
third party answers.
OR
Wait for the third party to answer and announce the transfer. Press the END key, then the first and third
parties will be connected.
Service Conditions
1. The service conditions of each feature are the same as for the Single Line Telephone, except for the
following:
a. Calling Number Display - PS
b. Last Number Redial - PS
c. Speed Dial - PS
2. The station number of a D
termPSII can be assigned flexibly. The limitation of the number and maximum
digits are the same as the regular NEAX2000 IVS2. 
						

							NUMBER SHARING
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
NDA-24274, Issue 1.0
Page 25
NUMBER SHARING
General Description
This feature allows the Dtermuser to have a DtermPSII as Sub Station and to get service with one telephone
number.
If that one user has both D
termand DtermPSII, with this feature used, the user is not required to have two separate
telephone numbers.
 When user is at his desk, a call is terminated to D
term.
 When user leaves his desk with DtermPSII, a call is automatically terminated to DtermPSII.
In this feature, the D
termand DtermPSII are referenced as Main Station and Sub Station, respectively.
Configuration Application
IVS Wired for Wireless
Station Application
Main Station : DtermMy Line
Sub Station : DtermPSII, Single Line Telephone
Operating Procedure
To forward a call to DtermPSII
1. To set from the Dterm(Main Station)
While in idle state, press the feature key for this feature.
→The lamp associated with the feature key lights red.
2. To cancel from the D
term(Main Station)
While in idle state, press the feature key for this feature.
→The lamp associated with the feature key goes out.
3. To set from the D
termPSII (SubStation)
Off hook and dial theaccess code for this feature.
→Receive Service Set Tone.
→The lamp associated with the feature key on the D
term(Main Station) lights red.
4. To cancel from the D
termPSII (SubStation)
Off hook and dial the cancel code for this feature.
→Receive Service Set Tone.
→The lamp associated with the feature key on the D
term(Main Station) goes out.
Note:This setting is usually done from Dterm.