NEC Neax 2000 Ivs2 Wcs Features And Specifications
Have a look at the manual NEC Neax 2000 Ivs2 Wcs Features And Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24274 ISSUE 1 STOCK # 152010 WCS Features and Specifications (for D termPSII) ® APRIL, 2000 NEC America, Inc.
LIABILITY DISCLAIMER NEC America, Inc. reserves the right to change the specifications, functions, or features, at any time, without notice. NEC America, Inc. has prepared this document for use by its employees and customers. The information contained herein is the property of NEC America, Inc. and shall not be reproduced without prior written approval from NEC America, Inc. NEAX and D termare registered trademarks of NEC Corporation. Copyright 2000 NEC America, Inc. PrintedinU.S.A.
ISSUE 1 ISSUE 2 ISSUE 3 ISSUE 4 DATE APRIL, 2000 DATE DATE DATE ISSUE 5 ISSUE 6 ISSUE 7 ISSUE 8 DAT E DATE DATE DAT E NEAX2000 IVS2 WCS Features and Specifications (for DtermPSII)Revision Sheet 1/1 NDA-24274 PA G E N o .ISSUE No.12345678 i1 ii1 11 2 1 31 41 51 6 1 71 81 91 10 1 111 121 131 14 1 151 161 171 18 1 191 201 211 22 1 231 241 251 26 1 271 281 291 30 1 311 321 331 34 1 351 361 371 38 1 PA G E N o .ISSUE No.12345678
NEAX2000 IVS2 WCS Features and Specifications (for DtermPSII) NDA-24274, Issue 1.0 Page i NEAX2000 IVS2 WCS Features and Specifications (for DtermPSII) TABLE OF CONTENTS Page ANALOGPBXINTERFACE........................................................... 1 ANNOUNCEMENT - PS NO ANSWER / ANNOUNCEMENT - PS OUT OF ZONE . . . . . . ........................................... 3 AUTOMATIC RELEASE - OUT OF ZONE CALLS ......................................... 5 CALLFORWARDING-NOTAVAILABLE................................................. 6 CCISINTERFACE................................................................ .. 8 CALLINGNAMEDISPLAY-PS ...................................................... 10 CALLING NUMBER DISPLAY - PS . . . . . . . . . . .......................................... 11 DTMFSIGNALSENDER............................................................ 12 GROUPCALL-AUTOMATICCONFERENCE(6/10-PARTY) ................................ 13 GROUPCALL-2WAYCALLING..................................................... 16 HANDOVER................................................................ ...... 18 INDIVIDUALPSCALLING........................................................... 19 LASTNUMBERREDIAL-PS ........................................................ 20 MULTI-LINEOPERATION-PS....................................................... 21 MULTI-SITEROAMING............................................................. 22 NEAX2000 IVS 2WIREDFORWIRELESS .............................................. 23 NUMBERSHARING ............................................................... 25 OUTOFZONEINDICATION......................................................... 27 OVERLAPDIALING................................................................ 28 PSAUTHORIZATION .............................................................. 29 PSLOCATIONREGISTRATION...................................................... 30 PRESETDIALING................................................................ . 31 RADIOCHANNELCHANGEOVER.................................................... 32 SPEECHENCRYPTION ............................................................ 33 SPEEDDIAL-PS ................................................................ . 34 VOICEMAILINDICATION........................................................... 35 APPENDIX A: D termFIXEDFUNCTIONKEYS .......................................... 37 APPENDIX B: D termLCDDISPLAYS .................................................. 38
TABLE OF FEATURES NEAX2000 IVS2 WCS Features and Specifications (for DtermPSII)Page iiNDA-24274, Issue 1.0 FEATUREX = available → = carried over to next level software 1900 2000 Ana log PBX In te rfa ce X Note 1 → Announ ce m ent - P S N o A nswer X → Announ ce m ent - P S O ut of Zone X → Auto m atic R elease - O ut of Zone Ca lls X → Ca ll F orw ard ing - N ot A va ila ble X No te 2 → CC IS I n te rface X No te 3 → C alli n g N am e D is p la y - P S X No te 4 → Ca lli n g N um ber D isp la y - PS X No te 4 → DT MF S ignal Sender X → G ro up C all- A uto m atic C onference (6/10-Party) X No te 2 → G roup Ca ll - 2 W ay C all ing X No te 2 → Hand over X → In div id ual PS Ca lli ng X → Last N um ber R ed ial - P S X → M ult i- L ine O pe ra tion - PS X → M ult i- S it e R oa min g X No te 4 → NEAX2000 I V S W ir ed for W ir e less X No te 2 → Nu mber Sha ring X → O ut of Z one Ind ica tion X → O ve rla p D ia lin g X → PS A uth oriz a tio n X → PS L oca tion Re gis tr a tion X → P re set D ia lin g X → Rad io C hannel C hange over X → Speech E ncry p tion X → Speed D ial - P S X → Voic e M ail In d ic a tio n X No te 2 → Note PBX Adjunct NEAX2000 IVS2 Analog PBX Interface CCIS Interface Wired for Wireless Note 1 X—— Note 2—— X Note 3—X— Note 4—X X X=available —=not available
ANALOG PBX INTERFACE NEAX2000 IVS2 WCS Features and Specifications (for Dterm PSII) NDA-24274, Issue 1.0 Page 1 ANALOG PBX INTERFACE General Description This feature allows the IVS-WCS to be integrated with many types of PBXs and to activate various PBX services by sending hookflash signal and DTMF tone. Configuration Application PBX Adjunct (LC-COT) Operating Procedure To place a call using Overlap Dialing: 1. Press the L1 or L2 key and receive extension dial tone from the PBX. 2. Dial the desired number and receive ringback tone from the PBX. To place a call using Preset Dialing: Dial the desired number, then press the L1 or L2 key and receive ringback tone from the PBX. To place an outside call using Overlap Dialing: 1. Press the L1 or L2 key and receive extension dial tone from the PBX. 2. Dial the trunk accesscode. 3. Receive outside dial tone. 4. Dial the desired outside number and receive ringback tone. To place an outside call using Preset Dialing: Dial the trunk access code and the desired outside number, then press the L1 or L2 key and receive ringback tone. To send the hooking signal: While engaged in a call, press the TRF key. The hooking signal is sent to thePBX. To send the DTMF signal: While engaged in a call, press anydigit key. DTMF signal is automatically sent from the IVS-WCS to the other party. Note:Refer to the description of the feature, DTMF Signal Sender. To place a call on Consultation Hold: While engaged in a call, press the TRF key and receive Feature Dial Tone from the PBX. The called party hears Music On Hold if the PBX provides the service.
ANALOG PBX INTERFACE NEAX2000 IVS2 WCS Features and Specifications (for Dterm PSII) Page 2NDA-24274, Issue 1.0 To transfer the call in progress: 1. While connected to the first party, press the TRF key and receive Feature Dial Tone. The number displayed on the LCD is cleared. The held party hears Music on Hold, if provided by the PBX. 2. Dial the third party number and receive ringback tone. The number is displayed. 3. Press the END key before the third party answers. The first and third parties will be connected when the third party answers. OR Wait for the third party to answer and announce the transfer. Press the END key, then the first and third parties will be connected. Service Conditions 1. The signal type of the followingcases can be programmed on a route-by-route basis between the IVS-WCS and the PBX. a. To dial for placing a call. b. To dial for accessing to the PBX service. c. To dial after sending hookflash. 2. The signal type of dial while a call is established is DTMF. It is not programmable. 3. If the PBX requires a pause timing between a trunk access code and an external number, the IVS-WCS can automatically insert the pause timing. 4. The called/calling party number is not displayed on the LCD of a D termPSII. 5. The interface between a PBX and the IVS-WCS is a LC and a COT. The same number of LC and COT as D termPSII are required. 6. Code Restriction and Class of Service are provided by the PBX. 7. Any type of call is originated via the PBX even a D termPSII-to-DtermPSII call. 8. The trunk circuit of the IVS-WCS can recognize a momentary open signal as a release signal, if the PBX provides it. 9. The station number of a D termPSII can be assigned flexibly. The limitation of the number and maximum digits depends on the PBX.
ANNOUNCEMENT - PS NO ANSWER / ANNOUNCEMENT - PS OUT OF ZONE NEAX2000 IVS2 WCS Features and Specifications (for Dterm PSII) NDA-24274, Issue 1.0 Page 3 ANNOUNCEMENT - PS NO ANSWER / ANNOUNCEMENT - PS OUT OF ZONE General Description This feature allows calls to a DtermPSII which cannot be paged in a predetermined period of time to be routed to the announcement notifying the calling party that the DtermPSII cannot answer. Announcements can be divided between Announcement-PS No Answer and Announcement-PS Out of Zone depending on the Dterm PSII condition. Configuration Application IVS Wired for Wireless and PBX Adjunct Operating Procedure No manual operation is required. Service Conditions 1. This feature is available to the DtermPSII allowed in system data. 2. This feature is activated when any of the following apply to the called D termPSII. a. Announcement - PS No Answer TheD termPSII does not answer in a predetermined period of time. b. Announcement - Out of Zone ThepoweroftheD termPSII is off. TheD termPSII is out of the service area. All the channels of the calling area to which the D termPSII belongs are busy. All the channels of the zone transceiver to which the D termPSII belongs are busy. 3. The default timer until the Announcement-PS No Answer activates is 32 seconds and until the Announcement-PS Out of Zone activates is 8 seconds. During this time, the calling party hears the ringback tone. The timer data for each announcement service can be specified by system data programming respectively. 4. A period of timer data to send each announcement can be specified by system dataprogramming. Only one sort of data can be set per one system. 5. Sixty-four types of messages can be assigned to each tenant of the D termPSII and each DtermPSII tenant group can have a different message. Besides, more than two tenant groups can share one message. 6. This feature can be allowed or denied according to the tenant class of the called D termPSII. If this feature is not allowed, the calling person keeps hearing the ringback tone. 7. The CO incoming calls are subject to charging. 8. The calling position registration of the D termPSII is available. During the announcement, the DtermPSII cannot originate or receive calls. (The calling person hears the busy tone.) 9. The calling person hears the reorder tone ifpre-set duration for sending the announcement elapses.
ANNOUNCEMENT - PS NO ANSWER / ANNOUNCEMENT - PS OUT OF ZONE NEAX2000 IVS2 WCS Features and Specifications (for Dterm PSII) Page 4NDA-24274, Issue 1.0 10. When several calls are connected with the Digital Announcement Trunk, an announcement for the first- connected call can be heard from the beginning. Announcement for other calls since second time will be heard from halfway during the predetermined time. If the Digital Announcement Trunk is all busy, the calling person keeps hearing the ringback tone.
AUTOMATIC RELEASE - OUT OF ZONE CALLS NEAX2000 IVS2 WCS Features and Specifications (for Dterm PSII) NDA-24274, Issue 1.0 Page 5 AUTOMATIC RELEASE - OUT OF ZONE CALLS General Description When a DtermPSII user engaged in a call moves out of the service area or enters a radio zone where all the channels are busy and the communication becomes unavailable, the call will be disconnected automatically, and the other party receives reorder tone. Configuration Application IVS Wired for Wireless and PBX Adjunct Operating Procedure No manual operation is required. Service Conditions 1. When the electric field strength becomes weak due to the DtermPSII user moving out of the service area or entering a radio zone where all the channels are busy, Out of Zone Indication is activated. 2. When the electric field strength becomes so weak that communication is no longer available, the call will be disconnected automatically.