NEC Neax 2000 Ivs2 Installation Procedure Manual

REGULATORY INFORMATION
FCC Part 68 Registration
NEAX2000 IVS2 Installation Procedure Manual
ND-70928 (E), Issue 1.0Page xiii
will provide advance notice so that you can make necessary modifications in order to maintain
uninterrupted service.
NO REPAIRS CAN BE DONE BY THE CUSTOMER.
Location of FCC Compliance Labels
Labels stating the NEAX2000 IVS2 FCC registration number and compliance with FCC Par ts 15
and 68 are attached on the inside of the system’s front cover. Label examples are as follows:
FCC...

NEAX2000 IVS2 Installation Procedure ManualPage xivND-70928 (E), Issue 1.0
REGULATORY INFORMATION
FCC Part 68 Registration
PN-24DTA 04DU9-BN N/A 6.0P
PN-24DTA 04DU9-DN N/A 6.0P
PN-24DTA 04DU9-1KN N/A 6.0P
PN-24DTA 04DU9-1SN N/A 6.0P
PN-24DTA 04DU9-1ZN N/A 6.0P
PN-BRTA 02IS5 RJ49C 6.0Y
PN-DAIA 04DU9-BN N/A 6.0N
PN-DAIA 04DU9-DN N/A 6.0N
PN-DAIA 04DU9-1KN N/A 6.0N
PN-DAIA 04DU9-1SN N/A 6.0N
PN-DAIA 04DU9-1ZN N/A 6.0N
PN-DAIA 04DU9-BN N/A 6.0N
PN-DAIB 04DU9-BN N/A 6.0N
PN-DAIB 04DU9-DN N/A 6.0N
PN-DAIB...

REGULATORY INFORMATION
Direct-Inward Dialing (DID) Calls
NEAX2000 IVS2 Installation Procedure Manual
ND-70928 (E), Issue 1.0Page xv
DIRECT-INWARD DIALING (DID) CALLS
Allowing this equipment to be operated in such a manner as to not provide for proper answer su-
pervision is a violation of Par t 68 of the FCC’s rules.
PROPER ANSWER SUPERVISION IS WHEN:
(a) This equipment returns answer supervision to the PSTN when DID calls are:
•
Answered by the called station

Answered by the attendant

Routed to a...

NEAX2000 IVS2 Installation Procedure ManualPage xviND-70928 (E), Issue 1.0
REGULATORY INFORMATION
Regulatory Information on Single-Line Analog Telephones
REGULATORY INFORMATION ON SINGLE-LINE 
ANALOG TELEPHONES
NEC single-line telephones comply with Part 68 of FCC Rules. On the bottom of the equipment
is a label that states, among other information, the FCC registration number and ringer equiva-
lence number (REN) for the equipment. If requested, this information should be provided to the
telephone...

REGULATORY INFORMATION
Industry Canada CS-03
NEAX2000 IVS2 Installation Procedure Manual
ND-70928 (E), Issue 1.0Page xvii
Before installing the equipment, users should ensure that it is permissible to be connected to the 
facilities of the local telecommunications company. The equipment must also be installed using 
an acceptable method of connection. In some cases, the company ’s inside wiring associated with
a single line individual service may be extended by means of a cer tified connector assembly...

NEAX2000 IVS2 Installation Procedure ManualPage xviiiND-70928 (E), Issue 1.0
REGULATORY INFORMATION
Safety Certifications
SAFETY CERTIFICATIONS
This equipment has been listed by Underwriters Laboratories and found to comply with all the
applicable requirements of the standard for telephone equipment U.L. 1459. This equipment
complies with Canadian Standards Association’s standard C 22.2 No. 225.
Safety Considerations
When using telephone equipment, basic safety precautions should always be followed to...

SAFETY INSTRUCTIONS
NEAX2000 IVS2 Installation Procedure Manual    
ND-70928 (E), Issue 1.0   Page 1
SAFETY INSTRUCTIONS
(1) Never install telephone wiring during a lightning storm.
(2) Never install telephone jacks in wet locations unless the jack is specifically designed for wet 
locations.
(3) Never touch uninsulated telephone wires or terminals unless the telephone line has been 
disconnected at the network interface.
(4) Use caution when installing or modifying telephone lines.
(5) Read and...

 NEAX2000 IVS2 Installation Procedure ManualPage 2  ND-70928 (E), Issue 1.0
SAFETY INSTRUCTIONS
(13) Do not allow anything to rest on the power cord. Do not locate this product where the cord 
will be abused by persons walking on it.
(14) Do not overload wall outlets and extension cords as this can result in the risk of fire or 
electric shock.
(15) Never push objects of any kind into this product through cabinet slots as they may touch 
dangerous voltage points or short out parts that could result in a...

INTRODUCTION
Purpose
NEAX2000 IVS2 Installation Procedure Manual    
ND-70928 (E), Issue 1.0   Page 3
INTRODUCTION
PURPOSE
This manual explains the installation procedure for the NEAX2000 IVS2. This equipment can only
be serviced by a qualified service person. You should perform each installation step according to
the procedures described in CHAPTER 2.
OUTLINE OF THIS MANUAL
This manual consists of the following chapters:
CHAPTER 1 GENERAL INFORMATION
This chapter explains the outline of system...

 NEAX2000 IVS2 Installation Procedure ManualPage 4  ND-70928 (E), Issue 1.0
INTRODUCTION
Reference Manuals
REFERENCE MANUALS
During installation, refer to the following manuals:
Command Manual Describes Customer Administration Terminal (CAT) opera-
tion, command function and setting data reguired for pro-
gramming the system, and Resident System Program.
Office Data Programming Manual Contains the Customer Specification Sheets and Office
Data Entry Sheets.
Feature Programming Manual Describes procedure...