Home > NEC > Communications System > NEC Neax 2000 Ivs2 General Description Manual

NEC Neax 2000 Ivs2 General Description Manual

Here you can view all the pages of manual NEC Neax 2000 Ivs2 General Description Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 81

Chapter 5  Feature Description Hotel/Motel Attendant Console
NEAX2000 IVS2 General Description
NDA-24293, Issue 2
Page 57
Dual HoldThis feature permits a station user who is placed on Hold by another station to place
that station on Hold also.
Exclusive HoldThis feature allows a Multiline Terminal user to place a call on Hold and to exclude all
other station users from retrieving the held call.
Non-exclusive 
HoldThis feature allows a Multiline Terminal user to place a call on Hold that may be
retrieved...

Page 82

NEAX2000 IVS2 General Description
Page 58NDA-24293, Issue 2
IntercomChapter 5  Feature Description
Intercom
Three types of Intercoms are available: Manual Intercom, Automatic Intercom, and
Dial Intercom. Each type of Intercom provides access to a small group of Multiline
Terminals with simplified calling methods.
Manual IntercomThe Manual Intercom groups have up to six Multiline Terminals sharing a common
signal path. Users can call other members of the Manual Intercom group by pressing a
Manual Intercom...

Page 83

Chapter 5  Feature Description Least Cost Routing - 3/6 Digit
NEAX2000 IVS2 General Description
NDA-24293, Issue 2
Page 59
Least Cost Routing - 3/6 Digit
This service feature allows the NEAX2000 IVS2 to be programmed to route outgoing
calls over the most economical facility (WATS, FX, DDD). Based on the individual
area code and office code dialed (6-digit analysis), the system examines the
programmed tables and uses the trunk in the order specified.
Line Lockout
This feature automatically releases a...

Page 84

NEAX2000 IVS2 General Description
Page 60NDA-24293, Issue 2
Message Reminder Chapter 5  Feature Description
Message Reminder
This feature allows a user or Attendant to turn on the message waiting (MW) lamp of
a Single Line Telephone, or the Message Reminder (MSG) LED of a Multiline
Terminal (if assigned).
Message Waiting
This feature allows the Attendant Console, Hotel/Motel (H/M) Front Desk Instrument,
administrative station, or Property Management System (PMS) terminal to light a
lamp (on an...

Page 85

Chapter 5  Feature Description Multiline Terminal Attendant Position
NEAX2000 IVS2 General Description
NDA-24293, Issue 2
Page 61
Wide Area 
Telephone Service 
(WATS) AccessThis feature allows any station user direct dial access to outgoing WATS lines.
Multiline Terminal Attendant Position
A Multiline Terminal with LCD can be programmed to function similar to an
Attendant position. This Attendant position has limited access to Attendant related
features and functions and can be substituted where an...

Page 86

NEAX2000 IVS2 General Description
Page 62NDA-24293, Issue 2
Off-hook Alarm Chapter 5  Feature Description
Day / Night Mode 
Change by Station 
DialingThis feature allows selected stations to activate a change from day mode to night
mode by dialing a special code.
Night Connection - 
FixedThis feature allows incoming calls normally terminated to the Attendant to reroute to a
predetermined station when the system is placed in Night Service.
Night Connection - 
FlexibleThis feature provides incoming calls...

Page 87

Chapter 5  Feature Description Periodic Time Indication Tone
NEAX2000 IVS2 General Description
NDA-24293, Issue 2
Page 63
Periodic Time Indication Tone
This feature provides a periodic tone to the station user who has made an outgoing
call. This feature can be allowed or denied for each station.
Pooled Line Access
A line key can be assigned to access Pooled Lines. Each line key will allow incoming,
outgoing, or both-way access to a trunk route.
Power Failure Transfer
This feature provides for specified...

Page 88

NEAX2000 IVS2 General Description
Page 64NDA-24293, Issue 2
Proper ty Management System Interface Chapter 5  Feature Description
Property Management System Interface
The NEAX2000 IVS2 provides a data interface to a locally provided Property
Management System (PMS). This enables communication between the NEAX2000
IVS
2 and the PMS in order to provide computer control of Hotel/ Motel features.
Proprietary Multiline Terminal
There are two Multiline Terminals available which can be used with the NEAX2000...

Page 89

Chapter 5  Feature Description Proprietary Multiline Terminal
NEAX2000 IVS2 General Description
NDA-24293, Issue 2
Page 65
Mute KeyThis feature allows the distant extension user, of a station user that presses a mute key
during conversation, not to hear the station users voice though the station user can
hear the distant extension users voice. By pressing the mute key again, the mute status
returns to original conversation.
Off-Hook Voice 
AnnouncementThis feature provides a secondary voice path to the...

Page 90

NEAX2000 IVS2 General Description
Page 66NDA-24293, Issue 2
Q-SIG Circuit Switched Basic Call - ETSI Version Chapter 5  Feature Description
Q-SIG Circuit Switched Basic Call - ETSI Version
This feature provides a tie-line connection between NEAX2000 IVS2 and the other
Q-SIG PBX using the ISDN protocol in conformity with ETS 300 172 standardized
by ETSI (European Telecommunications Standards Institute).
Remote Hold
This feature allows a Multiline Terminal user to hold it on the line button of
transferred...
Start reading NEC Neax 2000 Ivs2 General Description Manual

Related Manuals for NEC Neax 2000 Ivs2 General Description Manual

All NEC manuals