NEC Neax 2000 Ivs2 General Description Manual
Here you can view all the pages of manual NEC Neax 2000 Ivs2 General Description Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 91
Chapter 5 Feature Description Room Status NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page 67 Room Status This feature provides the Hotel/Motel (H/M) Front Desk Instrument with a visual display of the guests room status. A supplementary print out (individual and summary) can be provided. Route Advance This feature automatically routes outgoing calls over alternate facilities when the first choice trunk group is busy. Users select the first choice route by dialing the corresponding access code,...
Page 92
NEAX2000 IVS2 General Description Page 68NDA-24293, Issue 2 Stack DialChapter 5 Feature Description Stack Dial This feature enables a Multiline Terminal or an Attendant Console to remember the numbers dialed in the preceding five calls, including the last number dialed. The stack dial numbers are sequentially displayed on the LCD display, thus allowing the station user to make an outgoing call by selecting the desired dialed number from the display. Station Hunting Three Station Hunting arrangements...
Page 93
Chapter 5 Feature DescriptionStep Call NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page 69 Step Call This feature allows the Attendant or station user, after calling a busy station, to call an idle station by simply dialing an additional digit. This feature will operate only if the number of the idle station is identical to that of the busy station in all respects, except the last digit. Supervisory Control of Peripheral Equipment When various types of peripheral equipment (such as facsimiles,...
Page 94
NEAX2000 IVS2 General Description Page 70NDA-24293, Issue 2 Tie Line Tandem Switching Chapter 5 Feature Description Tie Line Tandem Switching This feature allows trunk-to-trunk connections through the NEAX2000 IVS2 without the need for any Attendant assistance or control. The major use of this feature is in association with a dial tandem tie line network to allow tie line connections and incoming tie line calls automatic access to, and completion of, local Central Office calls. Timed Queue When a user...
Page 95
Chapter 5 Feature Description Uniform Call Distribution (UCD) NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page 71 Uniform Call Distribution (UCD) The Uniform Call Distribution (UCD) feature permits incoming calls to terminate to a prearranged group of stations. Calls are distributed in the order of arrival to idle terminals within the group, based on which terminal has been idle the longest period of time. Stations may log on/log off from the UCD group. Supervisor stations may monitor...
Page 96
NEAX2000 IVS2 General Description Page 72NDA-24293, Issue 2 Uniform Numbering Plan (UNP) -Voice and Data Chapter 5 Feature Description Uniform Numbering Plan (UNP) -Voice and Data In the numbering plan for a network to be configured through the use of Tie Lines, a Uniform Numbering Plan (UNP) is employed. When UNP is employed, a station user from any PBX within the network can call a desired party by using a uniform dialing method based on the UNP. Variable Timing Parameters This feature gives the IVS...
Page 97
Chapter 5 Feature Description Voice Mail Transfer NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page 73 Voice Mail Transfer This feature has two functions that provide streamlined transfer access to voice mail. 1. One touch access to VMS: When an Attendant transfers an external call to a sta- tion, and if the station is busy or unanswered, the Attendant can transfer the call to a VMS by dialing “9” or by pressing a function key provided for this feature. 2. Transferring Camp-On call to VMS: When...
Page 99
NEAX2000 IVS2 General Description NDA-24293, Issue 2 Page 75 Chapter 6 Installation Procedure Installation Steps The installation of the NEAX2000 IVS2 is performed according to the following steps. Unpacking Cabling Installation of PIM Mounting Cards System Data Entry Operation Test In Service
Page 100
NEAX2000 IVS2 General Description Page 76NDA-24293, Issue 2 Items to be Provided at Site Chapter 6 Installation Procedure Cabling inside the unit, between the switching equipment and the MDF, can all be done by plug-and-jack connections, while printed circuit cards can easily be plugged into the edge connectors. On all installations, a special provision for plug-and-jack connections completely eliminates possible errors in wiring. This allows the installation to be done easily and smoothly. Items to...