NEC Neax 2000 Ivs Remote Pim System Manual
Have a look at the manual NEC Neax 2000 Ivs Remote Pim System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ND-46550 (E) CHAPTER 3 Pag e 43 Revision 2.0 Figure 3-19 Mounting Location of DAIC Card (Remote PIM) (Continued) ATTENTIONContents Static Sensitive Handling Precautions Required Remote PIM DAIC CARD LT00 LT01 LT02 LT03 LT04 LT05 LT14/AP4 LT13/AP3 LT12/AP2 LT11/AP1 LT10/AP0 P W R • PIM N - UB LT06 LT07 LT08 LT09 LT15/AP5 LT16/AP6 MP/FP/AP7BUS/AP8
CHAPTER 3 ND-46550 (E) Pag e 4 4 Revision 2.0 2.2.5 BUS Cable Connection Connect the DAIB card to the DAIC card by the 48-TW-0.2 CONN CA, as shown in Figure 3-20. Figure 3-20 DAIB-DAIC Cable Connection DAICDAIB TBUS RBUSBUS • When mounting 1 DAIC card : 48-TW-0.2 CONN CA DAICDAIB TBUS RBUSBUSDAIC • When mounting 2 DAIC cards
ND-46550 (E) CHAPTER 3 Pag e 45 Revision 2.0 2.2.6 Mounting of Line/Trunk Card on Small Platform PIM Mount the Line/Trunk cards in the following slots on the Remote PIM. Connect the line cables referring to Figure 3-21 through Figure 3-23 and Table 3-8. Figure 3-21 Mounting Location of Line/Trunk Card (Small Platform) Table 3-8 LTC Connector Accommodation (Small Platform) REMOTE PIM TYPE LTC CONNECTOR CARD SLOT NUMBER Small Platform LTC0 LT00~LT02 LTC1 LT03~LT05 LTC2 LT06~LT07 LTC1LTC0LTC2 BWB FRONT P W R Remote PIM LT00 LT01 LT02 LT03 LT04 LT05 LT06 LT07 LT08 LT09 LT10MP LINE/TRUNK Note 1:The CSI card can not be used on the Remote PIM. Note 2:One port of the last 24 ports can not be used for line/trunk, because it is used for control signaling channel. CARD *1 *2 *3 *1 When providing only one DAIB card (Max. 23 ports): LT00~LT02 slot *2 When providing one DAIB card and one DAIC card (Max. 47 ports): LT00~LT05 slot *3 When providing one DAIB card and two DAIC cards (Max. 64 ports): LT00~LT07 slot
CHAPTER 3 ND-46550 (E) Pag e 4 6 Revision 2.0Figure 3-22 Location of Each LEN (Small Platform) 0135 0134 0133 0132 0131 0130 0129 01280143 0142 0141 0140 0139 0138 0137 01360151 0150 0149 0148 0147 0146 0145 01440159 0158 0157 0156 0155 0154 0153 01520167 0166 0165 0164 0163 0162 0161 01600175 0174 0173 0172 0171 0170 0169 01680183 0182 0181 0180 0179 0178 0177 01760191 0190 0189 0188 0187 0186 0185 0184 Note:A maximum of 64 line/trunks can be accommodated in one Remote PIM. LT 0 2 LT 0 1 LT 0 0 SLOT No. LEN • When opposite DAIA card is set to FP No.1: 0263 0262 0261 0260 0259 0258 0257 02560271 0270 0269 0268 0267 0266 0265 02640279 0278 0277 0276 0275 0274 0273 02720287 0286 0285 0284 0283 0282 0281 02800295 0294 0293 0292 0291 0290 0289 02880303 0302 0301 0300 0299 0298 0297 02960311 0310 0309 0308 0307 0306 0305 03040319 0318 0317 0316 0315 0314 0313 0312 LT 0 2 LT 0 1 LT 0 0 SLOT No. LEN • When opposite DAIA card is set to FP No.2: 0391 0390 0389 0388 0387 0386 0385 03840399 0398 0397 0396 0395 0394 0393 03920407 0406 0405 0404 0403 0402 0401 04000415 0414 0413 0412 0411 0410 0409 04080423 0422 0421 0420 0419 0418 0417 04160431 0430 0429 0428 0427 0426 0425 04240439 0438 0437 0436 0435 0434 0433 04320447 0446 0445 0444 0443 0442 0441 0440 LT 0 2 LT 0 1 LT 0 0 SLOT No. LEN • When opposite DAIA card is set to FP No.3:LT 0 5 LT 0 4 LT 0 3 LT 0 7LT 0 6 LT 0 5 LT 0 4 LT 0 3 LT 0 7LT 0 6 LT 0 5 LT 0 4 LT 0 3 LT 0 7LT 0 6
ND-46550 (E) CHAPTER 3 Pag e 47 Revision 2.0 Figure 3-23 LTC Connector Pin Arrangement (Small Platform) LTC0 (FP1) (FP2) (FP3) 26 1 LEN0128 /0256 /0384 LT 0 0 27 2 0129 /0257 /0385 28 3 0130 /0258 /0386 29 4 0131 /0259 /0387 30 5 0132 /0260 /0388 31 6 0133 /0261 /0389 32 7 0134 /0262 /0390 33 8 0135 /0263 /0391 34 9 0136 /0264 /0392 LT 0 1 35 10 0137 /0265 /0393 36 11 0138 /0266 /0394 37 12 0139 /0267 /0395 38 13 0140 /0268 /0396 39 14 0141 /0269 /0397 40 15 0142 /0270 /0398 41 16 0143 /0271 /0399 42 17 0144 /0272 /0400 LT 0 2 43 18 0145 /0273 /0401 44 19 0146 /0274 /0402 45 20 0147 /0275 /0403 46 21 0148 /0276 /0404 47 22 0149 /0277 /0405 48 23 0150 /0278 /0406 49 24 LEN0151 /0279 /0407 50 MN 25 MJLTC1 (FP1) (FP2) (FP3) 26 1 LEN0152 /0280 /0408 LT 0 3 27 2 0153 /0281 /0409 28 3 0154 /0282 /0410 29 4 0155 /0283 /0411 30 5 0156 /0284 /0412 31 6 0157 /0285 /0413 32 7 0158 /0286 /0414 33 8 0159 /0287 /0415 34 9 0160 /0288 /0416 LT 0 4 35 10 0161 /0289 /0417 36 11 0162 /0290 /0418 37 12 0163 /0291 /0419 38 13 0164 /0292 /0420 39 14 0165 /0293 /0421 40 15 0166 /0294 /0422 41 16 0167 /0295 /0423 42 17 0168 /0296 /0424 LT 0 5 43 18 0169 /0297 /0425 44 19 0170 /0298 /0426 45 20 0171 /0299 /0427 46 21 0172 /0300 /0428 47 22 0173 /0301 /0429 48 23 0174 /0302 /0430 49 24 LEN0175 /0303 /0431 50 25 LTC2 (FP1) (FP2) (FP3) 26 1 LEN0176 /0304 /0432 LT 0 6 27 2 0177 /0305 /0433 28 3 0178 /0306 /0434 29 4 0179 /0307 /0435 30 5 0180 /0308 /0436 31 6 0181 /0309 /0437 32 7 0182 /0310 /0438 33 8 0183 /0311 /0439 34 9 0184 /0312 /0440 LT 0 7 35 10 0185 /0313 /0441 36 11 0186 /0314 /0442 37 12 0187 /0315 /0443 38 13 0188 /0316 /0444 39 14 0189 /0317 /0445 40 15 0190 /0318 /0446 41 16 LEN0191 /0319 /0447 42 17 43 18 44 19 45 20 46 21 47 22 48 23 49 24 50 25
CHAPTER 3 ND-46550 (E) Pag e 4 8 Revision 2.0 2.2.7 Mounting of Line/Trunk Card on 1000 IVS PIM Mount the Line/Trunk cards in the following slots on the Remote PIM. Connect the line cables referring to Figure 3-24 through Figure 3-26 and Table 3-9. Figure 3-24 Mounting Location of Line/Trunk Card (1000 IVS) Table 3-9 LTC Connector Accommodation (1000 IVS) REMOTE PIM TYPE LTC CONNECTOR CARD SLOT NUMBER 1000 IVS (48 Port PIM)LTC0 LT01~LT03 LTC1 LT04~LT08, LT00 LTC1LTC0 BWB FRONT P W R LT01 LT02 LT03 LT04 LT05 LT06 LT07 LT08 *1 When providing DAIB card only (Max. 23 ports): LT01~LT03slot *2 When providing one DAIB card and one DAIC card (Max. 4 ports): LT00~LT08 slot (Mounted DAIB in MP, mountedDAIC in LT07 so LT 08 is available for 8 ports card) *3 When DAIC is mounted in slot 07, slot 06 must use the 4-port Line/Trunk card, so that the last 4 ports of slot 06 do not inte rfere with the DAIC card and when DK00 can assign on this last 4-ports, the system can have a Max. of 44 ports. *1 *2 Remote PIM LINE/TRUNK CARD LT00 Note 1:The CSI card can not be used on the Remote PIM. Note 2:One port of the last 24 ports can not be used for line/trunk, because it is used for control signaling channel.
ND-46550 (E) CHAPTER 3 Pag e 49 Revision 2.0 Figure 3-25 Location of Each LEN (1000 IVS) 0191 0190 0189 0188 0187 0186 0185 01840135 0134 0133 0132 0131 0130 0129 01280143 0142 0141 0140 0139 0138 0137 01360151 0150 0149 0148 0147 0146 0145 01440159 0158 0157 0156 0155 0154 0153 01520159 0158 0157 01560167 0166 0165 0164 0163 0162 0161 01600167 0166 0165 01640175 0174 0173 0172 0171 0170 0169 0168 Note 1:A maximum of 44 line/trunks can be accommodated in one Remote PIM. Note 2:Do not mount line/trunk circuit card with cabling in this slot; this slot has no connection to the MDF via the backplane (LTC cables). Note 3:When an 8-port line/trunk card, which requires cabling to MDF, is mounted in Slot 04, Slot 05 must be left vacant or mounted with circuit cards* that do not interfere with the 8-port card mounted in LT04. Note 4:When DAIC is mounted in slot LT07, slot LT06 must use 4-port Line/Trunk card. * When an 8-port card is mounted in Slot 04, Slot 05 can only be mounted with the following card: PN-M03LT 0 3 LT 0 2 LT 0 1 SLOT No. LEN • When opposite DAIA card is set to FP No.1: 0319 0318 0317 0316 0315 0314 0313 03120263 0262 0261 0260 0259 0258 0257 02560271 0270 0269 0268 0267 0266 0265 02640279 0278 0277 0276 0275 0274 0273 02720287 0286 0285 0284 0283 0282 0281 02800287 0286 0285 02840295 0294 0293 0292 0291 0290 0289 02880295 0294 0293 02920303 0302 0301 0300 0299 0298 0297 0296 LT 0 3 LT 0 2 LT 0 1 SLOT No. LEN • When opposite DAIA card is set to FP No.2: 0447 0446 0445 0444 0443 0442 0441 04400391 0390 0389 0388 0387 0386 0385 03840399 0398 0397 0396 0395 0394 0393 03920407 0406 0405 0404 0403 0402 0401 04000415 0414 0413 0412 0411 0410 0409 04080415 0414 0413 04120423 0422 0421 0420 0419 0418 0417 04160423 0422 0421 04200431 0430 0429 0428 0427 0426 0425 0424 LT 0 3 LT 0 2 LT 0 1 SLOT No. LEN • When opposite DAIA card is set to FP No.3:LT 0 6 LT 0 5 LT 0 4 LT 0 8LT 0 7 Note 3 Note 4 LT 0 6 LT 0 5 LT 0 4 LT 0 8LT 0 7Note 3 Note 4 Note 3 Note 4 LT 0 6 LT 0 5 LT 0 4 LT 0 8LT 0 7 LT 0 0 Note 2 LT 0 0Note 2 LT 0 0Note 2
CHAPTER 3 ND-46550 (E) Pag e 5 0 Revision 2.0Figure 3-26 LTC Connector Pin Arrangement (1000 IVS) LTC0 (FP1) (FP2) (FP3) 26 1 LEN0128 /0256 /0384 LT 0 1 27 2 0129 /0257 /0385 28 3 0130 /0258 /0386 29 4 0131 /0259 /0387 30 5 0132 /0260 /0388 31 6 0133 /0261 /0389 32 7 0134 /0262 /0390 33 8 0135 /0263 /0391 34 9 0136 /0264 /0392 LT 0 2 35 10 0137 /0265 /0393 36 11 0138 /0266 /0394 37 12 0139 /0267 /0395 38 13 0140 /0268 /0396 39 14 0141 /0269 /0397 40 15 0142 /0270 /0398 41 16 0143 /0271 /0399 42 17 0144 /0272 /0400 LT 0 3 43 18 0145 /0273 /0401 44 19 0146 /0274 /0402 45 20 0147 /0275 /0403 46 21 0148 /0276 /0404 47 22 0149 /0277 /0405 48 23 0150 /0278 /0406 49 24 LEN0151 /0279 /0407 50 MN 25 MJLTC1 (FP1) (FP2) (FP3) 26 1 LEN0152 /0280 /0408 LT 0 4 / LT 0 5 27 2 0153 /0281 /0409 28 3 0154 /0282 /0410 29 4 0155 /0283 /0411 30 5 0156 /0284 /0412 31 6 0157 /0285 /0413 32 7 0158 /0286 /0414 33 8 0159 /0287 /0415 34 9 0160 /0288 /0416 LT 0 6 / LT 0 7 35 10 0161 /0289 /0417 36 11 0162 /0290 /0418 37 12 0163 /0291 /0419 38 13 0164 /0292 /0420 39 14 0165 /0293 /0421 40 15 0166 /0294 /0422 41 16 0167 /0295 /0423 42 17 0168 /0296 /0424 LT 0 8 43 18 0169 /0297 /0425 44 19 0170 /0298 /0426 45 20 0171 /0299 /0427 46 21 0172 /0300 /0428 47 22 0173 /0301 /0429 48 23 0174 /0302 /0430 49 24 LEN0175 /0303 /0431 50* 25* * When NEAXMail AD-8 is mounted in the LT00, pin 25 and 50 of the LTC1 bring out the NEAXMail AD-8 internal modem leads.
ND-46550 (E) CHAPTER 3 Pag e 51 Revision 2.0 2.2.8 Mounting of Line/Trunk Card on PIM N - UB (64 port PIM) Mounting of Line/Trunk cards in the slots on the Remote PIM. Connect the line cables referring to Figure 3-27 through Figure 3-29 and Table 3-10. Figure 3-27 Mounting Location of Line/Trunk Card Table 3-10 LTC Connector Accommodation REMOTE PIM TYPE LTC CONNECTOR CARD SLOT NUMBER PIM N-UBLTC0 LT00~LT05 LTC1 LT06~LT09, LT10, LT11 LTC2 LT12~LT15 LTC1LTC0LTC2 BWB FRONT P W R Remote PIM LT00 LT01 LT02 LT03 LT04 LT05 LT06 LT07 LT08 LT09 LT10 MP LINE/TRUNK CARD LT11 LT12 LT13 LT14 LT15 *1 *2 *3 *1 When providing one DAIB card only (Max. 23 ports): LT00~LT05 slots *2 When providing one DAIB card and one DAIC card (Max. 47 ports): LT00~LT11 slots *3 When providing one DAIB card and two DAIC cards (Max. 64 ports): LT00~LT15 (DAIC in slot AP6 ~ AP8) Note 1:The CSI card cannot be used on the Remote PIM. Note 2:One port of the last 24 ports cannot be used for Line/Trunk, because it is used for control signalling channel.
CHAPTER 3 ND-46550 (E) Pag e 5 2 Revision 2.0Figure 3-28 Location of Each LEN (PIM N_UB) • When opposite DAIA card is set to FP No.1: 0131 0135 0139 0143 0147 0151 0155 0159 0193 0167 0171 0175 0179 0183 0187 0191 0130 0134 0138 0142 0146 0150 0154 0158 0162 0166 0170 0174 0178 0182 0186 0190 0129 0133 0137 0141 0145 0149 0153 0157 0161 0165 0169 0173 0177 0181 0185 0189 0128 0132 0136 0140 0144 0148 0152 0156 0160 0164 0168 0172 0176 0180 0184 0188 (LT00) (LT01) (LT02) (LT03) (LT04) (LT05) (LT06) (LT07) (LT08) (LT09) (LT10) (LT11) (LT12) (LT13) (LT14) (LT15) LEN Slot No. • When opposite DAIA card is set to FP No. 2: 0259 0263 0267 0271 0275 0279 0283 0287 0291 0295 0299 0303 0307 0311 0315 0319 0258 0262 0266 0270 0274 0278 0282 0286 0290 0294 0298 0302 0306 0310 0314 0318 0257 0261 0265 0269 0273 0277 0281 0285 0289 0293 0297 0301 0305 0309 0313 0317 0256 0260 0264 0268 0272 0276 0280 0284 0288 0292 0296 0300 0304 0308 0312 0316 (LT00) (LT01) (LT02) (LT03) (LT04) (LT05) (LT06) (LT07) (LT08) (LT09) (LT10) (LT11) (LT12) (LT13) (LT14) (LT15) LEN Slot No. • When opposite DAIA card is set to FP No. 3: 0387 0391 0395 0399 0403 0407 0411 0415 0419 0423 0427 0431 0435 0439 0443 0447 0386 0390 0394 0398 0402 0406 0410 0414 0418 0422 0426 0430 0434 0438 0442 0446 0385 0389 0393 0397 0401 0405 0409 0413 0417 0421 0425 0429 0433 0437 0441 0445 0384 0388 0392 0396 0400 0404 0408 0412 0416 0420 0424 0428 0432 0436 0440 0444 (LT00) (LT01) (LT02) (LT03) (LT04) (LT05) (LT06) (LT07) (LT08) (LT09) (LT10) (LT11) (LT12) (LT13) (LT14) (LT15) Note:A maximum of 60 line/trunks can be accommodated in one Remote PIM. LEN Slot No.