NEC Neax 2000 Ivs Office Data Programming Manual
Here you can view all the pages of manual NEC Neax 2000 Ivs Office Data Programming Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 11
CHAPTER 1 ND-4 5503 ( E) D ATA P R O G RAM MIN G M ETH OD CIR CU IT C AR D MANU AL IN STA LLA TI ON PR O CEDURE M AN U AL D ESCRI PTIO N
Page 12
ND-4 5503 ( E) CHAPTE R 1
Page 13
CHAPTER 1 ND-45503 (E) Pag e 4 Revision 2.0 This page is for your notes.
Page 14
ND-45503 (E) CHAPTER 2 Pag e 5 Revision 2.0 CHAPTER 2 CUSTOMIZING DATA 1. GENERAL This chapter explains the general information for customizing data and the various tables for customer specifications such as numbering plan, station data and trunk data, etc., and sheets for designing the system layout such as Bay Face Layout. 2. GENERAL INFORMATION ON CUSTOMIZING DATA This section provides the information for customizing data in the Office Data Programming Manual. 2.1 Numbering Plan This table specifies...
Page 15
CHAPTER 2 ND-45503 (E)
Pag e 6
Revision 2.0
• Type of Telephone
The type of station telephone set is specified as shown below.
TYPE OF TEL
DESCRIPTION
DP ........................... Dial Pulse Telephone set
PB ........................... DTMF Telephone set
D
term....................... Dterm set
• SERVICE CLASS-A/B/C
Specify the service class (1-15) programmed in the Service Restriction Data Table.
• RESTRICTION CLASS-DAY/NIGHT
Specify the Trunk Restriction Class as shown below.
1:...
Page 16
ND-45503 (E) CHAPTER 2
Pag e 7
Revision 2.0
• DP/PB
Specify the type of address signal from/to distant office, as shown below.
TYPE OF TEL
DESCRIPTION
DP ......................... Dial Pulse
PB ......................... DTMF Signal
• KIND OF SIGNAL
Specify the kind of signaling system such as Ring Down, Loop, E & M etc. at the line.
2.4 Station Hunting Group Data
This data table requires the following data:
• KIND OF STATION HUNTING
Specify the kind of the Station Hunting System...
Page 17
CHAPTER 2 ND-4 5503 ( E) LE V EL 3 LT 00 2 01 — F XXX D 00 3
Page 18
ND-45503 (E) CHAPTER 2 Pag e 9 Revision 2.0 PN-AUC PN-2LDT PN-2ODTThe trunk number must be assigned to the 1st LEN (LEVEL 0) and/or 2nd LEN (LEVEL 1) of each LT slot. PN-2DAT • The card number must be assigned to the 1st LEN (LEVEL 0) and/or 3rd LEN (LEVEL 2) of each LT slot. • The card numbers are allocated to each PIM as shown below. Card Number Accommodated in EB000-EB031 PIM0/PIM1 EB032-EB063 PIM2/PIM3 EB064-EB095 PIM4/PIM5 EB096-EB127 PIM6/PIM7 PN-8RST • The card number must be assigned to...
Page 19
CHAPTER 2 ND-45503 (E) Pag e 10 Revision 2.0PN-DK00 • The card number must be assigned to the 1st LEN (LEVEL 0) and/or 3rd LEN (LEVEL 2) of each LT slot. • The card numbers of External Equipment Interface are allocated to each PIM as shown below. Card Number Accommodated in E800-E807 PIM0/PIM1 E808-E815 PIM2/PIM3 E816-E823 PIM4/PIM5 E824-E831 PIM6/PIM7 • The card numbers of External Key Interface are allocated to each PIM as shown below. Card Number Accommodated in E900-E915 PIM0/PIM1 E916-E931...
Page 20
ND-45503 (E) CHAPTER 2 Page 11 Revision 2.0 PN-2ILC • The ISDN circuit station number must be assigned to the 1st LEN (LEVEL 0) and/or 2nd LEN (LEVEL 1) of each LT slot. Table 2-1 Port Assignment Method (Continued) CARD TO BE ASSIGNEDPORT ASSIGNMENT TABLE REMARKS — 0003 — 0002 201 0001 200 0000LT 0 0 LEVEL 3 LEVEL 2 LEVEL 1 LEVEL 0Not to be assigned ISDN Circuit Station No.