NEC Nc900ca Manual

							41
4. Using Menus
4-1-3. How to enter alphanumeric characters 
Alphanumeric characters are entered for items, such as the log file of the specified period is written to USB memory. (See page 
73)
Characters can \fe e\fintered \fy pressing numeric \futt\fions on the control panel on this p\firojector.Move right and left\fi
Enter charactersDelete entered characters
Characters can \fe e\fintered \fy pressing each \futton \fias shown in the fo\fillowing ta\fle. 
• 
To delete a charact\fier during entry, press the DOWN \futton.\fi 
[Example of Entry]
To enter “XGA” for \fiexample, use the f\fiollowing procedure: 
(1)  Press the “8” \futton \fithree times. 
  V → W → X
(2)  Press the R\bGHT \futto\fin. 
(3)  Press the “3” \futton.\fi 
  XG
(4)  Press the R\bGHT \futto\fin. 
(5)  Press the “1” \futton.\fi 
  XGAButton  Entered character
1A → B → C → 1 → a → \f → c → ! →
2 D → E → F → 2 → d → e → f → “ →
3G → H → \b → 3 → g → h → i → # →
4 J → K → L → 4 → j → k → l → $ →
5M → N → O → 5 → m → n → o → % →
6 P → Q → R → 6 → p → q → r → & →
7 S → T → U → 7 → s → t → u → ’ →
8V → W → X → 8 → v → w → x → ( →
LAMP Y → Z → / → 9 → y → z → ? → ) →
\bMB* → , → . → 0 → ; → : → + → - → 
						

							42
4. Using Menus
4-2. Table of adjustment me\lnus
Menus in parentheses are menus for our se\firvice personnel. No\firmally, these menus cann\fiot \fe used. 
Main menuSubmenu DescriptionReference 
page
Title Select “Title Memory Name” Selects the title \fiof the signal to \fe\fi projected. 43
TEST Pattern Selects the test p\fiattern to \fe projected. 43
Configuration Lamp SetupAdjust Adjusts lamp \fright\finess.  44
Lamp Mode Selects the lamp t\fio use. 44
Lens Control Lens Position Adjusts the positi\fion of the projected screen.  45
Focus Zoom Adjusts the size a\find focus of the pr\fiojected screen. 45
Reset (FactoryDefault) Returns  the  settings  to  their  default  values.  Selects  \fetween  preset  \fut-
tons and titles on\fily, LAN settings only \fiand all settings. -
Lamp Usage \bnitializes the usa\fige time of the lamp\fi. 46
Filter Usage \bnitializes the usa\fige time of the air \fifilter. 46
(Fan Usage) \bnitializes the usa\fige time of the fan.\fi -
(Douser Count) Resets the num\fer o\fif times the douser\fi has \feen used. -
(Setup) Douser Setup Sets the douser op\fien/close state. -
Panel Key Lock Locks the \futtons o\fin the projector’s control panel so that t\fihey cannot \fe 
operated. -
Auto Key Lock Ena\fles or disa\fles\fi Auto Key Lock. -
3D Connector Sets the signal inp\fiut terminal for a 3D imag\fie system (3D terminal or 
GP\b/O terminal).
Sets the video inp\fiut port for 3D video syst\fiems. -
Unlit Mode Sets the projector operation \fiwhen the lamp does\fi not turn on. -
Off Timer Sets the time unti\fil the projector power is t\fiurned off automatically. -
Filter Message Sets the time to d\fiisplay the message \fiindicating the air \fifilter replacement 
cycle. -
Silent Mode Selects whether to\fi use the status in\fidicator, \fuzzer, indicators on th\fie 
control panel and \fackli\fight. -
(\bnstallation) Option Slot Configures the device inst\fialled in slot A (o\finly when the projector is in 
stand\fy mode). -
Orientation Sets the projection method an\fid cooling fan opera\fiting mode. -
Lens Center Moves the lens shi\fift position to the\fi center. -
Baudrate Sets the PC control connector (RS-2\fi32) data transmiss\fiion speed (\fps). -
Date/Time Sets the date and \fitime on the projector. -
New Router Setup Sets the router with the def\fiault settings when \fithe router \fuilt-in the \fi
projector has \feen replaced. -
Fan Speed Mode Sets the cooling fa\fin operating mode. -
(Title Setup) Preset ButtonPreset Button 1–16 Sets the title to \fi\fe assigned to the \fipreset \futtons ( t\fio  \futtons). 47
\bnformation LampOutput Displays the lamp o\fiutput setting. 47
Voltage Displays the lamp v\fioltage value. 47
Preset Button Preset Button 1–16 Displays the titles\fi which are assigned to the p\fireset \futtons ( t\fio  
\futtons). 47
Usage Displays information related to projector usage. 48
Error Code Displays the currently occurring err\fior. 48
Version System Displays the model \finame and various v\fiersion information a\fout the 
projector. 48
S\bB Displays the model \fiand version of the\fi signal input \foard (S\bB). 49
\bMB Displays the vendor\fi name and version \fiinformation a\fout the me\fidia 
\flock (\bMB). 49
Slave Displays the slave \fifirmware version of the p\firojector. 49
Ballast Displays the \fallas\fit firmware version of the p\firojector. 49
\bP Address System Displays the \bP add\firess of the projector. 49
Setup Date Displays the date w\fihen the projector was set up\fi (starting date of the 
warranty period). 50
Option Status Displays the link s\fitatus of the devic\fie mounted in slot \fiA and projector. 50 
						

							43
4. Using Menus
4-3. Title Select
4-3-1. Title select (Title Memory)
Selects the title \fiof the signal to \fe\fi projected. 
You can register up to 100 titles. You can also assign registered titles to the preset \futtons ( to  \futtons) on the projec-
tor’s control panel and call \fithem up directly using those \f\fiuttons. 
Request your deale\fir/distri\futor for d\fietails on registering and chan\figing titles.
← Displays the currently selected ite\fim with asterisk (*\fi).
← Selects the title\fi to \fe projected.
4-3-2. Test Pattern 
Selects the test p\fiattern to \fe projected. 
← Displays the currently selected ite\fim with asterisk (*\fi).
← Selects the test \fipattern to \fe projected. 
OFF, Alignment, Cross Hatch, Converge\fince, Red, Green, Blue, White, \fiBlack, 
White 50% [\bRE], H-\fiRamp, Logo 
						

							44
4. Using Menus
4-4. Configuration
Please request your dealer\fi/distri\futor to per\fiform the settings. 
4-4-1. Lamp Setup 
Adjust
Adjusts the lamp o\fiutput (\frightness).\fi
← Displays the current output power v\fialue (%) when the \filamp rated output \fiis 100%.
← Displays the current power value (W\fi).
Lamp Mode
Selects the lamp to use. When “Dual” is selected, lamp 1 and lamp 2 turn on/off at the same time. When “Lamp 1” or “Lamp 
2” is selected, th\fie other lamp is no\fit used. 
← Displays the currently selected ite\fim with asterisk (*\fi).
← Displays the setti\fing.
DualUses lamp 1 and la\fimp 2 at the same t\fiime.
Lamp 1 Uses only lamp 1 (\filamp 2 is not used\fi).
Lamp 2 Uses only lamp 2 (\filamp 1 is not used\fi).
TIP• \bf you change the l\fiamp mode while the\fi lamp is on, the c\fihanged settings are applied immediat\fiely.
•    \bf you change the lamp mode while the lamp is off, the changed settings are applied the next time the lamp is 
turned on.
NO TEWhen the lamp mode is changed, the LAMP ON/OFF \futton indicator \flinks green (See page 67). You cannot 
change the lamp mode while the LAMP ON/OFF \futton indicator is \flinking. Wait until the LAMP ON/OFF \futton 
indicator changes f\firom \flinking to stea\fidy on. 
						

							45
4. Using Menus
4-4-2. Lens Control
Adjust the positio\fin, size, and focus\fi of the projected screen.
Press the ENTER \futton to switch the display \fetween “Lens Position” and “Focus Zoom” adjustments. Press the EX\bT \futton 
to return to a menu one le\fivel a\fove. 
Lens Position 
Adjusts the positi\fion of the projected screen.
The projected screen moves in the s\fielected direction as you press the UP/DOWN/LEFT\fi/R\bGHT \futton. 
Focus Zoom 
Adjusts the size (\fiZoom) and focus (F\fiocus) of the projected screen. 
Press the UP/DOWN \futt\fion to adjust the f\fiocus. 
Press the LEFT/R\bGHT \fi\futton to adjust th\fie size of the projected screen.  
						

							46
4. Using Menus
4-4-3. Reset
This is used to reset the lamp and \fiair filter usage tim\fies.
Lamp Usage
Resets the lamp usage time. When \foth lamp 1 and lamp 2 are replaced at the same time, reset the usage times of \foth lamp 
1 and lamp 2.
[1] Press the LEFT/R\bGHT \fi\futton to select th\fie lamp to reset the usage time\fi of, and then press the ENTER \futton\fi.
[2]  Press the ENTER \futton\fi in the “Lamp1 Usa\fige” or “Lamp2 Usage\fi” screen, the confirmation screen will appear.
[3]  Select “Yes” in the confirmation screen, and then press the ENTER \futton\fi to reset the lamp usage\fi time.
← Selects the lamp \fito reset the usage time\fi of.
← Press the ENTER \futton\fi to display the co\finfirmation screen.
Filter Usage
Resets the air filter usage time. Press the ENTER \futton, then select “Yes” in the displayed confirmation screen, and then press 
the ENTER \futton to \fireset the air filter \fiusage time.
← Press the ENTER \futton\fi to display the co\finfirmation screen. 
						

							47
4. Using Menus
4-5. Title Setup
Sets the title to \fi\fe assigned to the \fipreset \futtons ( t\fio  \futtons) (up \fito 16 titles).
Request your deale\fir/distri\futor to pe\firform the settings. 
4-6. Information
Displays the hours \fiof lamp use, the v\fiersion information and error codes. 
4-6-1. Lamp 
Displays information relating to the lamp\fi.
Output
Displays the lamp m\fiode and lamp outpu\fit power value (W).\fi
← Selects the item \fito display.
← Displays the lamp \fimode.
← Displays the current power value (W\fi).
Voltage
Displays the voltag\fie value (V) of the\fi currently used lamp.
← Selects the item \fito display.
← Displays the volta\fige value (V) of lam\fip 1.
← Displays the volta\fige value (V) of lam\fip 2.
4-6-2. Preset Button
Sets the title to \fi\fe assigned to the \fipreset \futtons ( t\fio  \futtons) on t\fihe projector’s control panel. 
← Selects the preset \futton num\fer \fiwhose contents you\fi want to display.
← Displays the assig\fined title num\fers.
← Displays the registered names of the as\fisigned titles.
TIPTo select a title allocated to one of “Preset Button9” to “Preset Button16”, press the preset \futton while holding 
down  the  UP  \futton.  For  example,  to  select  the  title  allocated  to  “Preset  Button9”,  press  the    \futton  while 
holding down the UP\fi \futton. 
						

							48
4. Using Menus
4-6-3. Usage
Displays  information  related  to  the  projector  usage,  such  as  the  usage  time  of  the  projector,  lamps,  air  filters,  and  fan,  and 
information a\fout the la\fimp replacement cycle.
← Selects the item \fito display.
← Displays information a\fout the se\filected item.
ProjectorDisplays the usage \fitime of the projector.
Lamp Displays the usage \fitime of the lamp.
Lamp Remaining Displays the amount\fi of usage time remaining (approximate) from the current usage time 
with the unused st\fiate as 100% and 0%\fi when the lamp nee\fids replacement.
Lamp Strike Displays the num\fer\fi of times the lamp\fi has \feen turned on.
Filter Displays the usage \fitime of the air filt\fier.
Fan Displays the usage \fitime of the fan.
Douser Count Displays the num\fer\fi of times the dous\fier has \feen used.
4-6-4. Error Code
Displays the error code when an er\firor occurs.
← Displays the code \fiof the error currently occurring.
← Displays the name \fiof the error currently occurring.
When multiple errors occur, you can display \fithem \fy pressing the LEFT/R\bG\fiHT \futtons. 
4-6-5. Version 
Displays version in\fiformation a\fout the pr\fiojector, optional \foards, and \bMB.
System
Displays the versio\fin information of the projector. 
← Selects the item \fito display.
← Displays the versi\fion information.
B\bOSDisplays the B\bOS v\fiersion of the projector.
Firmware Displays the firmware version of the p\firojector.
Data Displays the data v\fiersion of the projector.
Lens Displays the firmware version of the l\fiens mount on the p\firojector.
Serial No. Displays the serial\fi num\fer of the projector.
Model Displays the model \finame of the projector. 
						

							49
4. Using Menus
SIB
Displays the model name and version information a\fout the signal input \foard (S\bB). When the projector is in stand\fy mode, 
the version information displays “-\fi--”.
← Displays the model\fi name of the signal\fi input \foard.
← Displays version i\finformation.
IMB
Displays the vendor name and version information a\fout the media \flock (\bMB). When the projector is in stand\fy mode, the 
vendor name is \flan\fik and the version \fiinformation displays “-\fi--”.
← Displays the vendo\fir name.
← Displays the versi\fion information.
Slave
Displays the slave \fifirmware version of the p\firojector.
← Displays the versi\fion information.
Ballast
Displays the \fallas\fit firmware version of the p\firojector. The version info\firmation is displaye\fid in the format “\fallast 1/\fall\fiast 2”.
← Displays the versi\fion information.
4-6-6. IP Address
Displays the \bP add\firess set in the projector. 
← Displays the \bP ad\fidress.
SystemDisplays the \bP add\firess set for the pr\fiojector (System). 
						

							50
4. Using Menus
4-6-7. Setup Date
Displays the date w\fihen the projector was set up\fi (starting date of the wa\firranty period). 
←  Displays the date w\fihen the projector was set up\fi (starting date of the wa\firranty 
period). 
4-6-8. Option Status
Displays the link status of the device mounted in slot A (media \flock, signal input \foard) on the projector. The device name is 
displayed in ( ) w\fihen the projector is in stan\fid\fy or when connect\fiion to the device \ficannot \fe confirmed. 
← Slot B is not ava\fiila\fle in this projector.
← Displays the link \fistatus of the devi\fice in slot A.
B Not Availa\fle: Slot B is\fi not availa\fle in t\fihis projector.
A Displays the link s\fitatus of the devic\fie in slot A. 
 \bMB: Med\fiia \flock (NC-90MS01)\fi
• 
NC-80LB: Signal inpu\fit \foard (NC-80LB01-B)
•  NC-80DS: Signal inpu\fit \foard (NC-80DS01-B)
•  No Board: No device mounte\fid