NEC Nc900ca Manual

41
4. Using Menus
4-1-3. How to enter alphanumeric characters 
Alphanumeric characters are entered for items, such as the log file of the specified period is written to USB memory. (See page 
73)
Characters can \fe e\fintered \fy pressing numeric \futt\fions on the control panel on this p\firojector.Move right and left\fi
Enter charactersDelete entered characters
Characters can \fe e\fintered \fy pressing each \futton \fias shown in the fo\fillowing ta\fle. 
• 
To delete a charact\fier during entry,...

42
4. Using Menus
4-2. Table of adjustment me\lnus
Menus in parentheses are menus for our se\firvice personnel. No\firmally, these menus cann\fiot \fe used. 
Main menuSubmenu DescriptionReference 
page
Title Select “Title Memory Name” Selects the title \fiof the signal to \fe\fi projected. 43
TEST Pattern Selects the test p\fiattern to \fe projected. 43
Configuration Lamp SetupAdjust Adjusts lamp \fright\finess.  44
Lamp Mode Selects the lamp t\fio use. 44
Lens Control Lens Position Adjusts the...

43
4. Using Menus
4-3. Title Select
4-3-1. Title select (Title Memory)
Selects the title \fiof the signal to \fe\fi projected. 
You can register up to 100 titles. You can also assign registered titles to the preset \futtons ( to  \futtons) on the projec-
tor’s control panel and call \fithem up directly using those \f\fiuttons. 
Request your deale\fir/distri\futor for d\fietails on registering and chan\figing titles.
← Displays the currently selected ite\fim with asterisk (*\fi).
← Selects the title\fi to...

44
4. Using Menus
4-4. Configuration
Please request your dealer\fi/distri\futor to per\fiform the settings. 
4-4-1. Lamp Setup 
Adjust
Adjusts the lamp o\fiutput (\frightness).\fi
← Displays the current output power v\fialue (%) when the \filamp rated output \fiis 100%.
← Displays the current power value (W\fi).
Lamp Mode
Selects the lamp to use. When “Dual” is selected, lamp 1 and lamp 2 turn on/off at the same time. When “Lamp 1” or “Lamp 
2” is selected, th\fie other lamp is no\fit used. 
← Displays...

45
4. Using Menus
4-4-2. Lens Control
Adjust the positio\fin, size, and focus\fi of the projected screen.
Press the ENTER \futton to switch the display \fetween “Lens Position” and “Focus Zoom” adjustments. Press the EX\bT \futton 
to return to a menu one le\fivel a\fove. 
Lens Position 
Adjusts the positi\fion of the projected screen.
The projected screen moves in the s\fielected direction as you press the UP/DOWN/LEFT\fi/R\bGHT \futton. 
Focus Zoom 
Adjusts the size (\fiZoom) and focus (F\fiocus) of...

46
4. Using Menus
4-4-3. Reset
This is used to reset the lamp and \fiair filter usage tim\fies.
Lamp Usage
Resets the lamp usage time. When \foth lamp 1 and lamp 2 are replaced at the same time, reset the usage times of \foth lamp 
1 and lamp 2.
[1] Press the LEFT/R\bGHT \fi\futton to select th\fie lamp to reset the usage time\fi of, and then press the ENTER \futton\fi.
[2]  Press the ENTER \futton\fi in the “Lamp1 Usa\fige” or “Lamp2 Usage\fi” screen, the confirmation screen will appear.
[3]  Select...

47
4. Using Menus
4-5. Title Setup
Sets the title to \fi\fe assigned to the \fipreset \futtons ( t\fio  \futtons) (up \fito 16 titles).
Request your deale\fir/distri\futor to pe\firform the settings. 
4-6. Information
Displays the hours \fiof lamp use, the v\fiersion information and error codes. 
4-6-1. Lamp 
Displays information relating to the lamp\fi.
Output
Displays the lamp m\fiode and lamp outpu\fit power value (W).\fi
← Selects the item \fito display.
← Displays the lamp \fimode.
← Displays the...

48
4. Using Menus
4-6-3. Usage
Displays  information  related  to  the  projector  usage,  such  as  the  usage  time  of  the  projector,  lamps,  air  filters,  and  fan,  and 
information a\fout the la\fimp replacement cycle.
← Selects the item \fito display.
← Displays information a\fout the se\filected item.
ProjectorDisplays the usage \fitime of the projector.
Lamp Displays the usage \fitime of the lamp.
Lamp Remaining Displays the amount\fi of usage time remaining (approximate) from the current...

49
4. Using Menus
SIB
Displays the model name and version information a\fout the signal input \foard (S\bB). When the projector is in stand\fy mode, 
the version information displays “-\fi--”.
← Displays the model\fi name of the signal\fi input \foard.
← Displays version i\finformation.
IMB
Displays the vendor name and version information a\fout the media \flock (\bMB). When the projector is in stand\fy mode, the 
vendor name is \flan\fik and the version \fiinformation displays “-\fi--”.
← Displays the...

50
4. Using Menus
4-6-7. Setup Date
Displays the date w\fihen the projector was set up\fi (starting date of the wa\firranty period). 
←  Displays the date w\fihen the projector was set up\fi (starting date of the wa\firranty 
period). 
4-6-8. Option Status
Displays the link status of the device mounted in slot A (media \flock, signal input \foard) on the projector. The device name is 
displayed in ( ) w\fihen the projector is in stan\fid\fy or when connect\fiion to the device \ficannot \fe confirmed. 
←...