NEC Infoset 408 System Manual

InfoSet 408Issue 1A
System Manual6 - 15
140Direct Calling for Day Mode 
on Trunk Line 1  (DIT 
Assignment)

   
Used to indicate an extension 
number (or voice mail number) that 
is used for direct calls (i.e., calls 
that are not routed through an 
attendant).  This assignment 
applies to day mode.Blank = No Assignment
Extension Number 10~59
141Direct Calling for Day Mode 
on Trunk Line 2   (DIT 
Assignment)

   
142
Direct Calling for Day Mode 
on Trunk Line 3   (DIT 
Assignment)...

Issue 1AInfoSet 408
6 - 16Telephone Programming
148Direct Calling Answer Delay 
Time  (DIT Answer Delay 
Time) 

  

Used to specify the duration of the 
delay of incoming direct calls (DIT).  
This applies to calls received on a 
line assigned for direct calling 
(DIT).0 = 0 sec. 4 = 30 sec.
1 = 5 sec. 5 = 40 sec.
2 = 10 sec. 6 = 50 sec.
3 = 20 sec. 7 = 60 sec.
Programming Note:For Functions 148 and 149, the trunk numbers are listed in descending order 
(4321).  To change the default...

InfoSet 408Issue 1A
System Manual6 - 17
206Extension Number 
Assignment


  	
#
Used to assign an extension 
number to each telephone in the 
system.Ports 1~10 = Ext. 10~17
Ports 11~12 = Ext. 50~51 (Voice Mail)
Available Extension Numbers = 10~59
Programming Note:For Function 206, the telephone port number and extension number are 
displayed.  To change the extension number for the displayed port, press the 
numbers on the dial pad that correspond to the extension number.  To advance 
to the...

Issue 1AInfoSet 408
6 - 18Telephone Programming
209Outgoing Call Priority Mode


  




Used to select the line that is 
seized first when the user goes off-
hook.  The system can be 
programmed to either seize an 
internal or external line for multiline 
telephones and single line 
telephones.  1~10 = External Line
– = Internal Line
210Doorphone 1 Tone for Day 
Mode

 
  



Used to assign a specified 
telephone to produce a tone 
(chime) signal when the doorphone...

InfoSet 408Issue 1A
System Manual6 - 19
216Handsfree Assignment
	


Used to assign (for each multiline 
telephone) handsfree operation.  1~8 = Enabled
– = Disabled
Programming Note:For Functions 216~218, the telephone ports are displayed in descending order 
(87654321).  To change the default setting, press the dialpad key that 
corresponds to the port  you want to change.  For example, if you want to 
change the setting for port 7, press
    .  When you press the number, the 
system toggles...

Issue 1AInfoSet 408
6 - 20Telephone Programming
221Authorized Dialing Table 
Selection

  

Specifies which Authorized Dialing 
Table (1 and 2) is used for each 
telephone in the system (includes 
both multiline and single line 
telephones).0 = Not Used
1 = Table 1  (Table assigned using 
function 020)
2 = Table 2  (Table assigned using 
function 021)
3 = Use both Tables 1 and 2
222Authorized Dialing for 
External Speed Dial Calls

  
 



Used to assign specific...

InfoSet 408Issue 1A
System Manual6 - 21
301Day Ringing for Trunk Line 1 

  ! 

Used to assign the duration of the 
delay between the time the call is 
received and the time the ringing 
tone is heard.  This option allows 
you to delay ringing to another 
telephone.  This assignment is for 
day mode. 0 = 0 sec.3 = 30 sec.
1 = 10 sec. 4 = 60 sec.
2 = 20 sec. 5 = No Tone
302Day Ringing for Trunk Line 2 

  ! 

303
Day Ringing for Trunk Line 3 

  ! ...

Issue 1AInfoSet 408
6 - 22Telephone Programming
331Automatic Line Selection for 
Trunk Line 1

   !



Used to designate which line keys 
are used for automatic line key 
selection. This is used to 
automatically seize a line by 
pressing  
  (InfoSet telephones) 
or

or going off-hook and 
dialing the appropriate outside line 
access code.  This is designated for 
each telephone.
1~10 = Enabled 
– = Disabled
332Automatic Line Selection for 
Trunk Line 2

   !


...

InfoSet 408Issue 1A
System Manual6 - 23
341Automatic Answering using 
Trunk Line 1

   


Used to enable or disable the ability 
to answer an incoming call by going 
off-hook.  If enabled, the user 
answers the call by going off-hook.  
If disabled, the user answers the 
call by going off-hook and pressing 
the line key where the call is 
ringing.  Only multiline telephones 
can be assigned this option.  1 = Enabled 
– = Disabled
342Automatic Answering using 
Trunk Line 2

  ...

Issue 1AInfoSet 408
6 - 24Telephone Programming
351Restricting Outgoing Calls for 
Trunk Line 1

   	



Used to enable or disable (for each 
telephone) the ability to make 
outgoing calls when 105 - Trunk 
Line Function is set to “Outgoing/
Incoming Calls.” 
  This option can 
be used with multiline and single 
line telephones.
1~10 = Outgoing Calls Enabled
– = Outgoing Calls Disabled
352Restricting Outgoing Calls for 
Trunk Line 2

   	



353
Restricting Outgoing...