NEC Guardian An Open Application Interface Operations Manual

NDA-30008   Revision 2.0Page 41
Guardian Operations Manual Administration
Procedure
Action Result
On the main menu, select the Query 
Database option and press Enter.  (1)The Query Database menu displays.  
(2)
Using the arrow keys to position the 
cursor, select the desired menu option 
and press Enter. The desired option displays.
To exit the Query Database menu, 
select the Quit option and press Enter, 
or press ESC.The main menu reappears. 

Page 42NDA-30008   Revision 2.0
Administration Guardian Operations Manual
Group DatabaseWhen you select the Group option on the Query Database menu, the Group 
Database screen displays information in the Group database.
Figure 3-8   Query Group Database
Notes
Fields in the working Group database are defined below.  For more information 
about these fields, refer to Chapter 2, “Installation Introduction” on page 7.
Group ID  –  The number that identifies a group.
Unconditionally Disable – Indicates...

NDA-30008   Revision 2.0Page 43
Guardian Operations Manual Administration
Procedure
Action Result
On the Query Database menu, select 
the Group option and press Enter.  (1)The Group Database screen displays 
with the Group ID prompt.
Enter the ID of the group to be 
reviewed and press Enter.The remaining fields are completed 
with data associated with the identified 
group.  (2)
Press ESC to exit the display. The Group field is singled out and 
highlighted again for entry of another 
group ID.
To exit...

Page 44NDA-30008   Revision 2.0
Administration Guardian Operations Manual
Authorization 
Code DatabaseSelect the Authorization Code option on the Query Database menu to display the 
Authorization Code Database screen.
Figure 3-9   Query Authorization Code Database
Notes
Fields in the working Authorization Code database are defined below.  For more 
information about these fields, refer to Chapter 2, “Installation Introduction” on 
page 7.
Authorization Code – The 10-digit authorization code....

NDA-30008   Revision 2.0Page 45
Guardian Operations Manual Administration
Procedure
Action Result
On the Query Database menu, select 
the Authorization Code option and 
press Enter.  (1)The Authorization Code Database 
screen displays with the authorization 
code prompt.
Enter the authorization code to be 
reviewed and press Enter.The remaining fields are completed 
with data associated with the selected 
authorization code.  (2)
Press ESC to exit the display. The Authorization Code field is singled 
out...

Page 46NDA-30008   Revision 2.0
Administration Guardian Operations Manual
Extension 
DatabaseSelect the Extension option on the Query Database menu to display the Extension 
Database screen.  When you enter the desired code, the field values for that 
extension display.
Figure 3-10   Query Extension Database
Notes
Fields in this database are defined below.  For more information about these fields, 
refer to Chapter 2, “Installation Introduction” on page 7.
Extension Number – The actual extension...

NDA-30008   Revision 2.0Page 47
Guardian Operations Manual Administration
Notes (Continued)
Enable Time – The time at which the extension is to be enabled, if the extension 
is currently disabled.  The amount of time before the extension is enabled 
depends on the number of 15-minute intervals indicated in the database for the 
system disable period.  If the extension is not system disabled, this field displays 
a N/A (Not Applicable) notation.
Lifetime Invalid Attempts – The number of invalid attempts...

Page 48NDA-30008   Revision 2.0
Administration Guardian Operations Manual
Time Interval 
DatabaseSelect the Time Interval Database option on the Query Database menu to display 
the Time Interval Database screen.  When you enter an index number, the field 
values for that interval display.
Figure 3-11   Query Time Interval Database
Notes
The time periods specific in this database are those intervals during which 
extensions, groups of extensions, or authorization codes can be routinely disabled.
Fields in...

NDA-30008   Revision 2.0Page 49
Guardian Operations Manual Administration
Procedure
Action Result
On the Query Database menu, select 
the Time Interval Database option 
and press Enter.  (1)The Time Interval Database screen 
displays with the Interval Index 
prompt.
Type the Interval Index to be reviewed 
and press Enter.The remaining fields are completed 
with the beginning and ending times of 
the selected Interval Index.  (2)
Press ESC to exit the display. The Interval Index field is singled out 
and...

Page 50NDA-30008   Revision 2.0
Administration Guardian Operations Manual
ID DatabaseSelect the ID option on the Query Database menu and enter a user identification 
number to display the authorization code associated to that identification number.
Figure 3-12   Query ID Database
Notes
Fields in the ID database are defined below:
ID – The telephone user identification number consisting of up to 10 characters.
Authorization Code – The authorization code assigned to the telephone user 
identification...