Home > NEC > Communications System > NEC Ds2000 Hardware Manual Instructions Manual

NEC Ds2000 Hardware Manual Instructions Manual

Here you can view all the pages of manual NEC Ds2000 Hardware Manual Instructions Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 61

4. Optional
Equipment
4-11
MUSIC SOURCES
Figure 4-4  INSTALLING A MUSIC SOURCE
RJ61X 
Pin
Latch
faces upTo CPU
Mod Jack
Note
reversalPort
DesignationTo 66 Block
WHT-BLU (1T)
BLU-WHT (1R)
WHT-ORN (2T)
ORN-WHT (2R)
WHT-GRN (3T)
GRN-WHT (3R)
WHT-BRN (4T)
BRN-WHT (4R)
80000 - 18A
4T
3T
2T
1R
1T
2R
3R
4R
1
2
3
4
5
6
7
8
Page OutMusic InRelay ContactsNo Connection
The following products should help if you make your own cables:Suttle SE-266-8K 8 Position Modular Plug (requires an SE-166
or SE-166-6 modular...

Page 62

4-12
POWER FAILURE TELEPHONES
Power Failure Cut-Through(Figure 4-5)
When system AC power fails, the 8ATRU PCB automatically
cuts through the first 2 trunk circuits to 2 Power Failure
Telephone connections.To install Power Failure Cut-Through:
1. Locate an available 8-pin jack in a trunk (A) block or station
(B) block.
Local codes may prevent you from using a DDK con-
nector on the A block for optional equipment.
2. For the 8-pin jack chosen, cross-connect the associated wire
pair from the A or B block...

Page 63

4. Optional
Equipment
4-13
POWER FAILURE TELEPHONES
Figure 4-5  CONNECTING A POWER FAILURE TELEPHONE
80000 - 40
BLK YEL GRN RED
To  P o w e r
Failure
Telephone
connector on
ATRU PCB
Power
Failure
Telephone
25 Pair
Installation CableStation
BlockCross
Connect
Block
8-Pin
Connector
BLU-WHT WHT-BLU
625
Modular
Jack One-Pair Cross-Connect 

Page 64

4-14
DSS CONSOLE
Installing a DSS Console(Figures 4-6 and 4-7)
The DSS Console gives a keyset user a Busy Lamp Field (BLF)
and one-button access to extensions, trunks and system features.
Keep the following in mind when installing DSS Consoles:
You can only connect 4 DSS Consoles.

You can only connect DSS Consoles to Super Display or 34-
Button Display telephones.

A DSS Console does not require a separate station port – it
connects directly to the keyset.
To install a DSS Console:
1. Turn the...

Page 65

4. Optional
Equipment
4-15
DSS CONSOLE
Figure 4-6  INSTALLING A 110-BUTTON DSS CONSOLE Figure 4-7  INSTALLING A 24-BUTTON DSS CONSOLE
8
0
0
0
0
 
-
 
4
7
To 625 Modular Jack
DSS Console Keyset
80000 - 44A
To 625 Modular Jack
DSS Console Keyset 

Page 66

4-16
2-OPX MODULE
Installing the 2-OPX Module (Figure 4-8)
The 2-OPX Module (P/N 92177A) provides two 2500 type ana-
log circuits for connection to on-premise 2500 type single line
devices (i.e., telephones, fax machines, modems, etc.) and to
telco OL13B/C OPX circuits. It uses a single digital extension
circuit for the power and signaling for both analog ports.To install a 2-OPX Module:
1. Locate an 8-pin modular connector in a trunk block or sta-
tion block.
Local codes may prevent you from using a...

Page 67

4. Optional
Equipment
4-17
2-OPX MODULE
Figure 4-8  CONNECTING THE 2-OPX MODULE
80000 - 41
BLK YEL GRN RED
To digital
station
circuit on
DSTU PCB
25 Pair
Installation CableStation
BlockCross
Connect
Block
14 AWG to known
Earth Ground
8-Pin
Connector
BLU-WHT WHT-BLU
625
Modular
Jack One-Pair Cross-Connect
2-OPX Modular
DS1
F
G 

Page 68

4-18
2-OPX MODULE
Wall Mounting the 2-OPX Module (Figure 4-9)
1. Following the diagram below, move the screws that secure
the 2-OPX Module cover from the outside holes to the inside
holes. Do not tighten the screws.
2. Attach the wall mount brackets to each side of 2-OPX
Module and tighten the screws.
3. With the connectors facing down, mount the 2-OPX Module
to the wall using suitable customer-provided fasteners.
Use the 2-OPX Module as its own mounting template.
4. Connect the 2-OPX module as described...

Page 69

4. Optional
Equipment
4-19
2-OPX MODULE80000 - 57
Figure 4-9  WALL MOUNTING THE 2-OPX MODULE 

Page 70

4-20
WALL-MOUNT KIT
Installing the Wall-Mount Kit
You can use a wall-mount kit to attach any key telephone to a
wall. The wall-mount kit includes a mounting bracket, wall-
mount screws and a handset hanger.
Installing the Wall-Mount Handset Hanger (Figure 4-10)
1. Remove the rubber plug that covers the slots for the handset
hanger. Store the plug in a safe place.
2. Insert the handset hanger in the slot provided beneath the
telephone’s hookswitch.
Figure 4-10  INSTALLING THE WALL-MOUNT HANGER
80000 - 38 
Start reading NEC Ds2000 Hardware Manual Instructions Manual

Related Manuals for NEC Ds2000 Hardware Manual Instructions Manual

All NEC manuals