Namco Tokyo Wars Operators Manual

Page 21
6 ADJUSTMENTS
6-1 Turning on the Power
After the machine has been installed, turn ON the power. The power switch is located on the rear of the cabinet.
6- 2 Adjustment Switches
The Adjustment switches are located inside the coin door 
1. Service Switch Press the service switch to obtain game credits without incriminating th\
e 
play meter.
2. Test Switch Slide the Test Switch ON to enter test mode.
Test Mode allows the testing and changing of game settings.  (Refer to
section 6-3 “ Test Mode” )...

Page 22
6-3 Test Mode
1. Open the coin door and slide the test switch “on”. The menu screen\
 will be displayed on the monitor.
2. Select the test required by turning the steering wheel left or right. Th\
e selected test will ‘blink’.
3. Enter the selected test by depressing the forward pedal (right pedal).\
 Select “EXIT” to return to the “Menu Screen”.
4. After testing is completed, ensure that the test switch is returned to t\
he “OFF” position to return to normal game mode.,
The T est Switch must...

Page 23
COIN OPTIONS
[ DEFAULT IN GREEN ]
GAME COST
1 COIN1 CREDIT...................... (a)
FREE PLAY OFF...................... (b)
EXIT : PRESS VIEW CHANGE BUTTON
6-3-1 Coin Options
1. Select item (1) COIN
OPTIONS on the
menu screen to set
the game cost and
related settings.
2. Turn the steering
wheel to select the
required item.
3. Use the Trigger
buttons to adjust the
settings.
4. Press ‘View Change’
Button to return to
the menu screen.
Note :- The price of play on this machine is set within the...

Page 24 6-3-2 Game Options
1. Select item (2) GAME OPTIONS on the menu screen to set the game
options and related settings.
2. Turn the steering wheel to select the required item.
3. Press the Trigger buttons to adjust the settings. Standard settings are
displayed in green.
4. Press ‘View Change’ Button to return to the menu screen.
GAME OPTIONS
[ DEFAULT IN GREEN ]
ID No. 1 ---------- ( a )
LINK 2---------- ( b )
PLAY TI ME 120 ---------- ( c )
GAME DIFFICULTY NORMAL---------- ( d )
TEAM COLOUR...

Page 25
6-3-3 Effect Test
1. Select item (3) Effect Test on the menu screen to test the lamps
and drive output
2. Turn the steering wheel to select the required item.
3. Use the right Trigger Button to activate the test.
4. Press ‘View Change’ Button to return to the menu screen.
EFFECT TEST
LAMP............................ (a)
HANDLE + SEAT............................ (b)
HANDLE............................ ( c )
SEAT ............................ (d)
TEST: PRESS RIGHT BUTTON
EXIT : PRESS VIEW CHANGE...

Page 26 6-3-4 Switch Test
1. Select item (4) Switch Test on the menu screen to test the switches
and Potentiometers
2. Turn the steering wheel to select the required item.
3. Use the right Trigger Button to activate the test.
4. Press ‘View Change and Right Trigger’ Buttons together to return to
the menu screen.
SWITCH TEST
HANDLE 0000................. (a)
RIGHT PEDAL 0000................. (b)
LEFT PEDAL 0000................. ( c )
RIGHT BUTTON OFF................. (d)
LEFT BUTTON OFF....................

Page 27 6-3-5 Monitor Test
1. Select item (5) “MONITOR TEST” on the menu screen to set up and
adjust the monitor.
2. On entering monitor test, the screen will display one of the following test
patterns.
GRADATION PATTERN
CROSSHATCH GREEN
CROSSHATCHWHITE
WHITE WINDOW (H)
WHITE WINDOW (M)
WHITE WINDOW (L)
INTERLACE PATTERN
VIEW ANGLE ADJUST (CRT)
VIEW ANGLE ADJUST (PROJECTOR)
FULL WHITE
3. Use the left trigger button to step forward through the patterns and use
the right trigger button to step backward...

Page 28
M E T INO I T P I R C S E DTE S Y R O T C A F
o N g n o S ) a (l l i w 1 0 0 . d n u o s t n e r e f f i d a e c u d o r p l l i w 6 5 2 o t p u r e b m u n h c a E
t s e t o e r e t s a e c u d o r p0 0 0
L t n o r F ) b (t s e d u o l 3 6 o t t s e w o l 0 0 ~ r e k a e p s t f e l t n o r f e h t r o f e m u l o v e h t s t e S2 4
R t n o r F ) c (t s e d u o l 3 6 o t t s e w o l 0 0 ~ r e k a e p s t h g i r t n o r f e h t r o f e m u l o v e h t s t e S2 4
e c i o V ) d (t s e d u o l 3 6...

Page 29 6-4 Initialization after Replacing  Parts
Initialization must be performed after replacing the Game PCB, ROMS, or
Steering and Pedal Potentiometers. If initialization is not performed, the game
will not function correctly.
1. Ensure that the steering wheel is in the centre position and that the
pedals are fully up.
2. Slide the Test Switch into the ON position while pressing the service
button. Keep the service button pressed until the “ADJUST MODE” screen
is displayed. (This will take approx. 5...

Page 30
6-6 Linking Two Machines
1. Ensure that the 
power is OFF.
2. Loosen the two pozi head screws retaining the link cover bracket, locate\
d next to the mains-in socket on the rear of the machine, and remove the 
link cover bracket.
3. Use the supplied link cables to connect each link board. (See Diag.) 
4 . Set the link switches to “ON”, “EXT” and “ON”.  (Refer to 6-6-1  (below)  “Setting the
Link Switches”)
5. Refit the link cover bracket, passing the link cables through the slots \
in the cover...