Namco Panic Park Operators Manual
Have a look at the manual Namco Panic Park Operators Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 93 Namco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 47
Page 47 6-3-3-4 Lamp Test
1. Select ‘LAMP TEST’ from the I/O Test Screen. The following screen
is displayed:-
The start button lamp will illuminate each time the start switch is
pressed and the display will change from OFF to ON.I/O TEST
DIP 4
12345678 [ON:RED]
BUTTON LAMP (L) OFF....................................... (a)
BUTTON LAMP (R) OFF....................................... (b)
EXIT
ENTER SW : ENTER
6-3-4 Monitor Test
1. Select “MONITOR TEST” on the menu screen to test and adjust the
Monitor. The...](http://img.usermanuals.tech/thumb/5509/63145/w64_panic-park-operator-s-english_d-46.png "Page 47
Page 47 6-3-3-4 Lamp Test
1. Select ‘LAMP TEST’ from the I/O Test Screen. The following screen
is displayed:-
The start button lamp will illuminate each time the start switch is
pressed and the display will change from OFF to ON.I/O TEST
DIP 4
12345678 [ON:RED]
BUTTON LAMP (L) OFF....................................... (a)
BUTTON LAMP (R) OFF....................................... (b)
EXIT
ENTER SW : ENTER
6-3-4 Monitor Test
1. Select “MONITOR TEST” on the menu screen to test and adjust the
Monitor. The...")
![Page 49
Page 49
6-3-6 ADS Data
By selecting ADS Data from the menu screen, all of the bookkeeping
details can be read and/or reset.
6-3-7 Others 1. Select “OTHERS” on the menu screen. The following screen is displa\
yed.
2. Use the Select Up/Down switch choose the required item then press the Enter button.
3. Select “EXIT” and press the Enter button to return to the menu scr\
een.
(a,) Displays game software version.
(b) The current time is displayed (the time cannot be reset)
(c) Used to test the PCB. (this...](http://img.usermanuals.tech/thumb/5509/63145/w64_panic-park-operator-s-english_d-48.png "Page 49
Page 49
6-3-6 ADS Data
By selecting ADS Data from the menu screen, all of the bookkeeping
details can be read and/or reset.
6-3-7 Others 1. Select “OTHERS” on the menu screen. The following screen is displa\
yed.
2. Use the Select Up/Down switch choose the required item then press the Enter button.
3. Select “EXIT” and press the Enter button to return to the menu scr\
een.
(a,) Displays game software version.
(b) The current time is displayed (the time cannot be reset)
(c) Used to test the PCB. (this...")
![Page 51
Page 51 4. Move both levers to the centre and press either the left or right start
button.
If initialization is successfull COMPLETED will be displayed.
5. Slide the TEST switch OFF to return to normal game mode.I/F INITIALIZE
DIP
12345678[ON:OFF]
MOVE BOTH JOYSTICKS LEFT,
THEN PRESS BUTTON.
[L] 0000 [R] 0000
MOVE BOTH JOYSTICKS RIGHT,
THEN PRESS BUTTON
[L] 0000 [R] 0000
MOVE BOTH JOYSTICKS CENTER,
THEN PRESS BUTTON
[L] 0000 [R] 0000
COMPLETED
EXIT
SELECT SW : CHOOSE
ENTER SW : ENTER](http://img.usermanuals.tech/thumb/5509/63145/w64_panic-park-operator-s-english_d-50.png "Page 51
Page 51 4. Move both levers to the centre and press either the left or right start
button.
If initialization is successfull COMPLETED will be displayed.
5. Slide the TEST switch OFF to return to normal game mode.I/F INITIALIZE
DIP
12345678[ON:OFF]
MOVE BOTH JOYSTICKS LEFT,
THEN PRESS BUTTON.
[L] 0000 [R] 0000
MOVE BOTH JOYSTICKS RIGHT,
THEN PRESS BUTTON
[L] 0000 [R] 0000
MOVE BOTH JOYSTICKS CENTER,
THEN PRESS BUTTON
[L] 0000 [R] 0000
COMPLETED
EXIT
SELECT SW : CHOOSE
ENTER SW : ENTER")
![Page 56
Page 56
8-4 Replacing the Start Button or Lamp
1. Remove the control panel cover. (see section 8-2 page 54)
2. Replace the micro switch. (
Note: When replacing the switch ensure that
the wires are replaced to the correct terminals).
3. Remove the lamp holder from the button assembly by pulling the lamp holder out.
4. Replace the lamp.
5. To replace the button assy undo the retaining nut and withdraw the butto\
n assembly from the control panel cover.](http://img.usermanuals.tech/thumb/5509/63145/w64_panic-park-operator-s-english_d-55.png "Page 56
Page 56
8-4 Replacing the Start Button or Lamp
1. Remove the control panel cover. (see section 8-2 page 54)
2. Replace the micro switch. (
Note: When replacing the switch ensure that
the wires are replaced to the correct terminals).
3. Remove the lamp holder from the button assembly by pulling the lamp holder out.
4. Replace the lamp.
5. To replace the button assy undo the retaining nut and withdraw the butto\
n assembly from the control panel cover.")
Page 51 4. Move both levers to the centre and press either the left or right start button. If initialization is successfull COMPLETED will be displayed. 5. Slide the TEST switch OFF to return to normal game mode.I/F INITIALIZE DIP 12345678[ON:OFF] MOVE BOTH JOYSTICKS LEFT, THEN PRESS BUTTON. [L] 0000 [R] 0000 MOVE BOTH JOYSTICKS RIGHT, THEN PRESS BUTTON [L] 0000 [R] 0000 MOVE BOTH JOYSTICKS CENTER, THEN PRESS BUTTON [L] 0000 [R] 0000 COMPLETED EXIT SELECT SW : CHOOSE ENTER SW : ENTER
Page 52 8. MAINTENANCE G GG G GAdjustment or maintenance on this machine should be carried out by qualified personnel only. D DD D DEinstellungen und Wartung des Gerätes dürfen nur von dafür qualifiziertem Fachpersonal vorgenommen werden. l ll l lJusteringer eller vedligehold af denne maskine bør kun udføres af kvalificeret personale. E EE E ELos ajustes y el mantenimiento de esta máquina deben ser realizados sólo por personal cualificado. F FF F FL’installation, le service, le réglage, ou la maintenance doivent être effectués uniquement par les personnes qualifiées. K KK K KÌåôáôñïðÝò Þ åðéäéïñèþóåéò óôá ìç÷áíÞìáôá ðñÝðåé íá ãßíï\ íôáé ìüíï áðü åîïõóéïäïôçìÝíá Üôïìá. I II I IRegolazioni e manutenzione su questa macchina devono essere fatti solo da personale specializzato. N NN N NJustering eller vedlikehold på denne maskinen skall bare utføres av kvalifiserte personell. O OO O OAanpassingen of onderhoud aan deze machine dient alleen uitgevoerd te worden door bekwaam personeel. P PP P PAfinações ou manutenção nesta maquina, deverão ser efectuadas sómente por pessoal qualificado. S SS S SJusteringar och underhåll på denna maskin skall endast utföras av kvalificerad personal. l ll l lTätä laitetta saa säätää tai huoltaa vain siihen ammattipätevyyden omaava henkilökunta.
Page 53 8-1 Greasing the Swing Lever Springs The Swing Lever Springs should be greased every 6 months. 1. Remove 9off security screws (M5x12) from the control panel cover. 2. Disconnect the connectors and remove the control panel cover. 3. Apply grease to the positions shown in the following diagram. 4. Reassemble in reverse order.
Page 54 8-2 Checking Swing Lever Absorber Rubbers Check for wear every 3 months. 1. Remove 9off security screws (M5x12) from the control panel cover. 2. Disconnect the connectors and remove the control panel cover. 3. Check the absorber rubbers for wear or damage. 4. Replace the rubber if worn or damaged. (see section 8-6 page 58)
Page 55 8-3 Replacing the Fluorescent Tube or Starter 1. Remove the 3off pozi head screw (M5x12) and remove the top retaining bracket. 2. Remove the Header Acrylic. 3. Replace the fluorescent tube or starter. 4. Reassemble in the reverse order.
Page 56 8-4 Replacing the Start Button or Lamp 1. Remove the control panel cover. (see section 8-2 page 54) 2. Replace the micro switch. ( Note: When replacing the switch ensure that the wires are replaced to the correct terminals). 3. Remove the lamp holder from the button assembly by pulling the lamp holder out. 4. Replace the lamp. 5. To replace the button assy undo the retaining nut and withdraw the butto\ n assembly from the control panel cover.
Page 57 8-5 Replacing the Potentiometers 1. Remove the control panel cover (see section 8-2 page 54). 2. Disconnect the potentiometer connector. 3. Place the swing lever of the potentiometer to be replaced to the centre \ of the machine. 4. Slacken the grub screw (M4x8) and remove the potentiometer complete with mounting bracket. 5. Replace the potentiometer. 6. Reassemble in reverse order. Note: When refitting the potentiometer ensure that the locating tab of the potentiometer engages in the hole in the mounting bracket and the grubscrew engages on the flat of the potentiometer shaft.
Page 58 8-6 Replacing the Swing Lever Absorber Rubbers 1. Remove the control panel cover. (see section 8-2 page 54) 2. Remove the 2off socket head screws (M5x16) and remove the transparent cover. 3. Remove the 4off button head screws (M4x6) and remove the absorber rubber. 4. Replace the absorber rubber. 5. Reassemble in reverse order
Page 59 8-7 Replacing the Side Covers 1. Remove the 2off pozi head screws (M4x10) with spring washers. 2. Replace the side covers. 3. Reassemble in reverse order.
Page 60 8-8 Replacing the Monitor The monitor weighs approx 40kg. Ensure that at least two people are used\ to remove the monitor, and there is sufficient space to work safely. 1. Remove the control panel cover. (see section 8-2 page 54) 2. Loosen the 2off lower security screws (M5x12), and remove the 4off upper security screws (M5x12), and remove the monitor maintenance panel from the rear of the cabinet. 3. Disconnect the monitor connectors. 4. Remove the 4off hex head screws (M6x40), flat and spring washers retaining the monitor to the monitor shelf. 5. Remove the 4off security screw (M5x12) and remove the monitor vac- form.