Home > Namco > Games > Namco Aqua Jet Rosta Spring Shaft Replacement Instructions

Namco Aqua Jet Rosta Spring Shaft Replacement Instructions

Add to Favourites
    Download as PDF

    View the Namco Aqua Jet Rosta Spring Shaft Replacement Instructions for free. All the Namco manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 Update 1 AQUA JET ROSTA SPRING SHAFT ASSEMBLY REPLACEMENT INSTRUCTIONS
    Page 2 TOOLS and PARTS REQUIRED Ratchet Handle Ratchet Handle Extension Bar Hex Sockets ............... 10mm 13mm 17mm 9/16 „ AF Spanner ..................... 13mm Pozi Driver ................. No.2 Hex Wrench ............... 8mm Security Wrench for M5 Security Button Head Screws Rosta Spring Shaft Assembly ....... Part No 46000088A (Supplied) 10ml Loctite 242 ............................ Part No 95000004 (Supplied) Castrol LM Grease ........................ Part No - - - - - - - (Supplied) SAFETY WARNINGS...
    Page 3 1. Remove 4off Hex Head Screws (M8x60). Raise the level adjusters on the Ride Assembly and separate the ride assembly from the monitor cabinet only sufficiently enough to disconnect the connectors and air line. Note: Ensure that the blue locking ring is pushed towards the connector when removing the air tube. There may be a loud “hissing” noise as the air in the compressor tank is released, 2. Move the ride assembly away from the monitor cabinet to give sufficient room to work and lower the level...
    Page 4 9. Disconnect the 3way and 9way connectors located at the base of the control arm on the right hand side. 10. Remove 8off Hex Head Screws (M8x45) and remove the control arm assembly. The 13mm spanner will be required to remove the two front screws as there is insufficient room to use a socket. Note: This assembly is heavy, ensure that at least two people are available to remove this unit. 11. Disconnect the 15way connector and remove the Pozi Head Screw (M4x12) retaining the Earth wire inside the Tank...
    Start reading Namco Aqua Jet Rosta Spring Shaft Replacement Instructions

    Related Manuals for Namco Aqua Jet Rosta Spring Shaft Replacement Instructions

    All Namco manuals