Multitech Multivoip 100 Model Mvp110 Standalone Voice/ip Gateway Quick Start Guide

11 Configure Host MultiVOIP
Configuring Your Host MultiVOIP
Configuring your Host MultiVOIP involves software loading
and configuration.
The software loading procedure does not provide every screen
or option in the loading process.  It is assumed that a technical
person with a thorough knowledge of Windows and the
software loading process is performing the installation.
Additional information on the MultiVOIP software is provided in
the User Guide supplied with your MultiVOIP.
If you are installing a...

MultiVOIP Quick Start Guide
12If the Multi-Tech Installation CD window does not display
automatically, click My Computer, then right click the CD
ROM drive icon, click Open, and then click the Autorun
icon.
3. When the Multi-Tech Installation CD dialog box displays,
click the Install Software icon.
4. The Welcome dialog box displays.
Press Enter or click Next to continue.
5. Follow the on-screen instructions to install your MultiVOIP
software.     

13 Configure Host MultiVOIP
6. The following dialog box selects the COM port of your PC
connected to the Command port of the MultiVOIP.  From
the Select Port list, choose the COM port of your PC.
Click OK to continue.
7. The Setup Complete dialog displays.
Click Finish to continue.     

MultiVOIP Quick Start Guide
148. The following message displays:
Click No to continue.
9. In the program group, double-click Upgrade Software.
10. The following window displays.
 Click Ye s to continue.
11. The IP Protocol Default Setup dialog box displays.
The default Frame Type is TYPE_II.  If this does not match
your IP network, change the Frame Type by selecting SNAP
from the Frame Type list.  The available Frame Type choices
are TYPE_II and SNAP.
12. In the Ethernet group, enter your unique LAN IP...

15 Configure Host MultiVOIP
The IP address is your unique LAN IP address, and the
Gateway address is the IP address of the device
connecting your MultiVOIP to the Internet.
Click OK when you are finished.
13. The Channel Setup dialog box displays.  It is used to
define the voice/fax channel interface, voice coder, fax
parameters, billing options, security settings, and regional
phone parameters (tone pairs).
14. If you are connecting a station device such as an analog
telephone, a fax machine, or a Key...

MultiVOIP Quick Start Guide
16again.  This option is available for all interface types.  In
the Flash Timer box, enter the time, in milliseconds, for
the duration of flash hook signals output on the interface.
To dedicate the local voice/fax channel to a remote voice/
fax channel, (so you will not have to dial the remote
channel) select the Auto Call Enable check box.  Enter
the phone number of the remote VOIP in the Phone
Number box.
The Voice/Fax tab displays the parameters for the voice
coder, faxing,...

17 Configure Host MultiVOIP
17. The Billing/Security tab displays the parameters for
billing options, call authentication, and automatic
disconnection.
18. You can set up billing options for inbound and outbound
calls by selecting them in the Billing Options group and
then entering the charge in cents per number of seconds.
19. The Call Authentication option enables password
protection for outbound and inbound calls on the selected
voice/fax channel.  If you enable password protection on
inbound or...

MultiVOIP Quick Start Guide
18If your country/region is not the default USA, click the
Regional tab and select your country or region from the
list.
21. To change the Tone Pairs on the Regional tab, select your
country or region from the Country/Region list.
The Tone Pairs group parameters change per your
choice.  Click OK when finished.
22. The following dialog box displays.
Click OK.  The upgrade takes several minutes to complete.
23. From the Program Group, double-click MultiVOIP
Configuration.  Click...

19 Configure Host MultiVOIP
database.  The host database has the phone numbers of
all the MultiVOIPs available for communication on an IP
network.  This database is downloaded to each Client
MultiVOIP as it comes online.
Click Add to begin building your phone directory database.
24. The Add/Edit Phone Entry dialog box displays.
In the Station Information group, enter the unique phone
number of the local device connected to Channel 1 in the
Phone Number box.  For example phone number 101.     

MultiVOIP Quick Start Guide
2025. The Description is optional, but can be useful in
associating the channel to the extension.  If you want,
enter a description of your local phone number.  This
description identifies the phone number you entered in the
previous step.
26. Select the Permit Hunting check box if you want calls to
roll over to a second voice/fax channel on an answering
MultiVOIP 2, 4, or 8-port client MultiVOIP when the first
channel is busy.
Note: The Host MultiVOIP must have a static IP...